Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board This patchs adds support for the Allnet ALL0258N outdoor AP/bridge. The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio, it got 8MB of NOR and 32MB SDRAM. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28564		2011-10-24 21:49:21 +00:00
docs
include	linux: add 3.1 checksum	2011-10-24 12:58:44 +00:00
package	package/ipset: move out to packages/net/	2011-10-24 21:35:02 +00:00
scripts	scripts/feeds: override the OPENWRT_BUILD variable when calling internal targets (based on patch from #10212 )	2011-10-21 13:03:37 +00:00
target	ar71xx: add kernel support for the Allnet ALL0258N board	2011-10-24 21:49:21 +00:00
toolchain
tools	tools/lzma-old fix compile issues (patch from #10253 )	2011-10-21 12:52:49 +00:00
.gitignore
BSDmakefile
Config.in	build system: add a feature that allows you to pull sources from a git tree instead of the usual tarball	2011-10-09 16:33:59 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org