EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Openwrt build for Asrock G10 Router
6,701 Commits 1 Branch 0 Tags 212 MiB
d8e032edef
Go to file
Felix Fietkau d8e032edef don't replace powerpc arch with ppc 
'powerpc' is a valid arch for the LINUX_KARCH variable, but the build
system unconditionally replaces LIUNUX_KARCH=powerpc with
LINUX_KARCH=ppc.

This change only does the replacement if LINUX_KARCH isn't set. This
allows us to use the powerpc architecture.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

SVN-Revision: 9405
2007-10-23 06:23:12 +00:00
docs
include don't replace powerpc arch with ppc 2007-10-23 06:23:12 +00:00
package remove madwifi karma patch until it's fixed 2007-10-22 22:40:23 +00:00
scripts remove the dummy profile that was created on targets that have subtargets 2007-10-21 06:44:06 +00:00
target don't replace powerpc arch with ppc 2007-10-23 06:23:12 +00:00
toolchain
tools ar7: add eva image generation (thanks Axel Gembe) 2007-10-22 14:20:02 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile
Config.in add possibility to set default .config values 2007-10-14 02:15:37 +00:00
feeds.conf
LICENSE
Makefile add autorebuild check for menuconfig 2007-10-14 02:28:34 +00:00
README
rules.mk refreshed madwifi patches 2007-10-20 19:13:53 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org