Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos d832cd11f8 ramips: add image for ALL0256N-8M The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB. In order to expose the whole amount of flash, add another image which contains the corresponding GENERIC_8M mtdparts. [juhosg: change suffix from '8m' to '8M'] Patch by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33614		2012-10-04 06:34:09 +00:00
docs
include	version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists	2012-09-24 18:26:48 +00:00
package	mac80211: allow scans in access point mode (for site survey)	2012-10-03 19:13:20 +00:00
scripts	AR71xx/9xxx based routers are the most common these days, select that as the default target	2012-09-28 20:54:35 +00:00
target	ramips: add image for ALL0256N-8M	2012-10-04 06:34:09 +00:00
toolchain	build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems	2012-09-23 09:50:01 +00:00
tools	cmake: update to version 2.8.9	2012-09-28 00:07:28 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: turn on package parallel builds by default and fix descriptions.	2012-09-28 18:09:41 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: add TARGET_AR and TARGET_RANLIB	2012-09-22 20:10:24 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org