Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jonas Gorski d75cd5be37 b53: fix mmap register read/writes > 32 bit For bcm63xx integrated switches, broadcom changed the data endianess to match the system endianess. But this only applies to within one word, which causes 48/64 bit values to be still split into their "litte endian" groups. E.g. 48 bit values (with 5 being the most significant byte) aligned 0x00 ..01 or 0123 0x04 2345 45.. will become 0x00 ..10 resp. 3210 0x04 5432 54.. Likewise for 64 bit values. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 44568		2015-02-27 17:40:17 +00:00
config	config: disable kernel tracing on uml	2015-02-11 11:31:26 +00:00
docs
include	build: move tmp/.prereq-build to staging_dir/host to gracefully handle staging_dir deletion	2015-02-27 07:34:24 +00:00
package	package: mtd: move bcm963xx_tag definition into source code	2015-02-27 17:38:25 +00:00
scripts	scripts: fix getver git dir check	2015-02-14 20:48:37 +00:00
target	b53: fix mmap register read/writes > 32 bit	2015-02-27 17:40:17 +00:00
toolchain	toolchain/gcc: fix an ICE on ARM (PR58595)	2015-02-11 11:30:56 +00:00
tools	brcm63xx: do not align squashfs rootfs start	2015-02-27 17:38:14 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: don't add staging_dir/host/bin/ path again	2015-02-10 15:49:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org