Openwrt/target/linux/brcm2708/patches-4.14/950-0416-configs-Add-SENSOR_GPIO_FAN-m.patch
Stijn Tintel f5919b65d4 brcm2708: add kernel 4.14 support
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-18 23:19:21 +02:00

56 lines
1.6 KiB
Diff

From de95673d68e09e69cc7c6039136dd2fa0002c42b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Tue, 18 Sep 2018 11:03:20 +0100
Subject: [PATCH 416/454] configs: Add SENSOR_GPIO_FAN=m
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
arch/arm/configs/bcm2709_defconfig | 3 ++-
arch/arm/configs/bcmrpi_defconfig | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -656,6 +656,7 @@ CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_HWMON=m
CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_RPI_POE_FAN=m
@@ -914,10 +915,10 @@ CONFIG_SND_PISOUND=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4554=m
+CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_WM8804_I2C=m
-CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -649,6 +649,7 @@ CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_HWMON=m
CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_RPI_POE_FAN=m
@@ -907,10 +908,10 @@ CONFIG_SND_PISOUND=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4554=m
+CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_SPDIF=m
CONFIG_SND_SOC_WM8804_I2C=m
-CONFIG_SND_SOC_CS4265=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y