f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
31 lines
1.1 KiB
Diff
31 lines
1.1 KiB
Diff
From 1767590e5da1817e0f9ea0521af9096acb2590c6 Mon Sep 17 00:00:00 2001
|
|
From: Steve Pavao <stevep@korgrd.com>
|
|
Date: Fri, 10 Aug 2018 17:09:50 -0400
|
|
Subject: [PATCH 366/454] devicetree: add RPi CM3 dts to arm64; mimic the RPi
|
|
3B arm64 dts implementation, by referring to the actual dts file in the arm
|
|
directory
|
|
|
|
---
|
|
arch/arm64/boot/dts/broadcom/Makefile | 2 ++
|
|
arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 +++
|
|
2 files changed, 5 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts
|
|
|
|
--- a/arch/arm64/boot/dts/broadcom/Makefile
|
|
+++ b/arch/arm64/boot/dts/broadcom/Makefile
|
|
@@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rp
|
|
dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-3-b.dtb
|
|
dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b.dtb
|
|
dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-3-b-plus.dtb
|
|
+dtb-$(CONFIG_ARCH_BCM2709) += bcm2710-rpi-cm3.dtb
|
|
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb
|
|
|
|
dts-dirs += ../overlays
|
|
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/broadcom/bcm2710-rpi-cm3.dts
|
|
@@ -0,0 +1,3 @@
|
|
+#define RPI364
|
|
+
|
|
+#include "../../../../arm/boot/dts/bcm2710-rpi-cm3.dts"
|