f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
52 lines
2.1 KiB
Diff
52 lines
2.1 KiB
Diff
From 1ee09b8c520f7e3cab8c417f18e89e89774662ea Mon Sep 17 00:00:00 2001
|
|
From: Eric Anholt <eric@anholt.net>
|
|
Date: Fri, 9 Mar 2018 13:26:33 -0800
|
|
Subject: [PATCH 353/454] overlays: Remove stale notes about vc4's CMA
|
|
alignment in the README.
|
|
|
|
We haven't needed alignment since
|
|
553c942f8b2cbc7394b4d4fa2f848b23a8f07451, and the current overlays
|
|
don't specify any.
|
|
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 20 ++++++++++----------
|
|
1 file changed, 10 insertions(+), 10 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1958,11 +1958,11 @@ Name: vc4-fkms-v3d
|
|
Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx
|
|
display stack.
|
|
Load: dtoverlay=vc4-fkms-v3d,<param>
|
|
-Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB)
|
|
- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB)
|
|
- cma-128 CMA is 128MB, 128MB-aligned
|
|
- cma-96 CMA is 96MB, 128MB-aligned
|
|
- cma-64 CMA is 64MB, 64MB-aligned
|
|
+Params: cma-256 CMA is 256MB (needs 1GB)
|
|
+ cma-192 CMA is 192MB (needs 1GB)
|
|
+ cma-128 CMA is 128MB
|
|
+ cma-96 CMA is 96MB
|
|
+ cma-64 CMA is 64MB
|
|
|
|
|
|
Name: vc4-kms-v3d
|
|
@@ -1970,11 +1970,11 @@ Info: Enable Eric Anholt's DRM VC4 HDM
|
|
booting to GUI while this overlay is in use will cause interesting
|
|
lockups.
|
|
Load: dtoverlay=vc4-kms-v3d,<param>
|
|
-Params: cma-256 CMA is 256MB, 256MB-aligned (needs 1GB)
|
|
- cma-192 CMA is 192MB, 256MB-aligned (needs 1GB)
|
|
- cma-128 CMA is 128MB, 128MB-aligned
|
|
- cma-96 CMA is 96MB, 128MB-aligned
|
|
- cma-64 CMA is 64MB, 64MB-aligned
|
|
+Params: cma-256 CMA is 256MB (needs 1GB)
|
|
+ cma-192 CMA is 192MB (needs 1GB)
|
|
+ cma-128 CMA is 128MB
|
|
+ cma-96 CMA is 96MB
|
|
+ cma-64 CMA is 64MB
|
|
|
|
|
|
Name: vc4-kms-kippah-7inch
|