f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
61 lines
2.2 KiB
Diff
61 lines
2.2 KiB
Diff
From 8dfd69beccc1c582fba134825df65f7e5d2f17ad Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 21 Mar 2018 16:04:18 +0000
|
|
Subject: [PATCH 258/454] BCM27XX_DT: Set LED modes from Device Tree
|
|
|
|
The new default values for LAN7515 (LAN7800) are:
|
|
|
|
LED0 = 1 (link1000/activity)
|
|
LED1 = 6 (link10/link100/activity)
|
|
|
|
Also add two dtparams - eth_led0 and eth_led1 - to provide user control
|
|
over the LEDs.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 7 +++++++
|
|
arch/arm/boot/dts/overlays/README | 10 ++++++++++
|
|
2 files changed, 17 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
|
|
@@ -22,6 +22,11 @@
|
|
reg = <1>;
|
|
microchip,eee-enabled;
|
|
microchip,tx-lpi-timer = <600>; /* non-aggressive*/
|
|
+ /*
|
|
+ * led0 = 1:link1000/activity
|
|
+ * led1 = 6:link10/100/activity
|
|
+ */
|
|
+ microchip,led-modes = <1 6>;
|
|
};
|
|
};
|
|
};
|
|
@@ -32,5 +37,7 @@
|
|
__overrides__ {
|
|
eee = <ðernet>,"microchip,eee-enabled?";
|
|
tx_lpi_timer = <ðernet>,"microchip,tx-lpi-timer:0";
|
|
+ eth_led0 = <ðernet>,"microchip,led-modes:0";
|
|
+ eth_led1 = <ðernet>,"microchip,led-modes:4";
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -93,6 +93,16 @@ Params:
|
|
compatible devices (default "on"). See also
|
|
"tx_lpi_timer".
|
|
|
|
+ eth_led0 Set mode of LED0 (usually orange) (default
|
|
+ "1"). The legal values are:
|
|
+ 0=link/activity 1=link1000/activity
|
|
+ 2=link100/activity 3=link10/activity
|
|
+ 4=link100/1000/activity 5=link10/1000/activity
|
|
+ 6=link10/100/activity 14=off 15=on
|
|
+
|
|
+ eth_led1 Set mode of LED1 (usually green) (default
|
|
+ "6"). See eth_led0 for legal values.
|
|
+
|
|
i2c_arm Set to "on" to enable the ARM's i2c interface
|
|
(default "off")
|
|
|