f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
83 lines
2.4 KiB
Diff
83 lines
2.4 KiB
Diff
From 8134311059a478a79f7c9c9d08163bafa972fd39 Mon Sep 17 00:00:00 2001
|
|
From: Alexander Graf <agraf@suse.de>
|
|
Date: Tue, 20 Feb 2018 17:36:21 +0100
|
|
Subject: [PATCH 226/454] overlays: Add overlay for missing AUX interrupt
|
|
controller support (#2391)
|
|
|
|
Upstream Linux today does not support the AUX interrupt controller
|
|
yet. To make sure it can use our device tree, add an overlay that
|
|
reverts it to something upstream understands again.
|
|
|
|
See: https://github.com/raspberrypi/firmware/issues/943
|
|
|
|
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 7 ++++
|
|
.../upstream-aux-interrupt-overlay.dts | 33 +++++++++++++++++++
|
|
3 files changed, 41 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -122,6 +122,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
tinylcd35.dtbo \
|
|
uart0.dtbo \
|
|
uart1.dtbo \
|
|
+ upstream-aux-interrupt.dtbo \
|
|
vc4-fkms-v3d.dtbo \
|
|
vc4-kms-v3d.dtbo \
|
|
vga666.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1721,6 +1721,13 @@ Params: txd1_pin GPIO pin
|
|
rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15)
|
|
|
|
|
|
+Name: upstream-aux-interrupt
|
|
+Info: Allow usage of downstream .dtb with upstream kernel by binding AUX
|
|
+ devices directly to the shared AUX interrupt line.
|
|
+Load: dtoverlay=upstream-aux-interrupt
|
|
+Params: <None>
|
|
+
|
|
+
|
|
Name: vc4-fkms-v3d
|
|
Info: Enable Eric Anholt's DRM VC4 V3D driver on top of the dispmanx
|
|
display stack.
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/upstream-aux-interrupt-overlay.dts
|
|
@@ -0,0 +1,33 @@
|
|
+// Overlay for missing AUX interrupt controller
|
|
+// Instead we bind all AUX devices to the generic AUX interrupt line
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2708";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&uart1>;
|
|
+ __overlay__ {
|
|
+ interrupt-parent = <&intc>;
|
|
+ interrupts = <0x1 0x1d>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spi1>;
|
|
+ __overlay__ {
|
|
+ interrupt-parent = <&intc>;
|
|
+ interrupts = <0x1 0x1d>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&spi2>;
|
|
+ __overlay__ {
|
|
+ interrupt-parent = <&intc>;
|
|
+ interrupts = <0x1 0x1d>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|