Openwrt/target/linux/brcm2708/patches-4.14/950-0205-dwc_otg-Fix-a-regression-when-dequeueing-isochronous.patch
Stijn Tintel f5919b65d4 brcm2708: add kernel 4.14 support
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89

Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""

Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
  MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch

Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.

Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-12-18 23:19:21 +02:00

61 lines
2.6 KiB
Diff

From e071e9b36cb053f06a10986d987bfeb0e362657c Mon Sep 17 00:00:00 2001
From: P33M <p33m@github.com>
Date: Tue, 13 Feb 2018 15:41:35 +0000
Subject: [PATCH 205/454] dwc_otg: Fix a regression when dequeueing isochronous
transfers
In 282bed95 (dwc_otg: make nak_holdoff work as intended with empty queues)
the dequeue mechanism was changed to leave FIQ-enabled transfers to run
to completion - to avoid leaving hub TT buffers with stale packets lying
around.
This broke FIQ-accelerated isochronous transfers, as this then meant that
dozens of transfers were performed after the dequeue function returned.
Restore the state machine fence for isochronous transfers.
---
drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
@@ -189,13 +189,21 @@ static void kill_urbs_in_qh_list(dwc_otg
}
if(qh->channel) {
+ int n = qh->channel->hc_num;
/* Using hcchar.chen == 1 is not a reliable test.
* It is possible that the channel has already halted
* but not yet been through the IRQ handler.
*/
if (fiq_fsm_enable && (hcd->fiq_state->channel[qh->channel->hc_num].fsm != FIQ_PASSTHROUGH)) {
+ local_fiq_disable();
+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE;
qh->channel->halt_pending = 1;
+ if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO ||
+ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING)
+ hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED;
+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
+ local_fiq_enable();
} else {
dwc_otg_hc_halt(hcd->core_if, qh->channel,
DWC_OTG_HC_XFER_URB_DEQUEUE);
@@ -596,9 +604,15 @@ int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_
/* In FIQ FSM mode, we need to shut down carefully.
* The FIQ may attempt to restart a disabled channel */
if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) {
+ local_fiq_disable();
+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE;
qh->channel->halt_pending = 1;
- //hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED;
+ if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO ||
+ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING)
+ hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED;
+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
+ local_fiq_enable();
} else {
dwc_otg_hc_halt(hcd->core_if, qh->channel,
DWC_OTG_HC_XFER_URB_DEQUEUE);