Openwrt build for Asrock G10 Router
Go to file
Jonas Gorski d12502b666 brcm63xx: Add NuCom R5010UNv2 support
This patch adds support for the NuCom R5010UNv2.

It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.

It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707

Tested-by: Angel Fontan <angel.fontan@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47697
2015-12-02 22:18:20 +00:00
config kernel: add support for KERNEL_CGROUP_PIDS 2015-10-26 11:54:56 +00:00
docs
include kernel: update 4.1 to 4.1.13 2015-12-02 21:52:41 +00:00
package mac80211: install new firmware for ath9k-htc on target 2015-12-02 20:32:11 +00:00
scripts build: add support for choosing a different url filename part than the output file 2015-11-22 19:06:33 +00:00
target brcm63xx: Add NuCom R5010UNv2 support 2015-12-02 22:18:20 +00:00
toolchain gcc: make colors optional based on the GCC_COLORS env var 2015-11-25 14:12:44 +00:00
tools tools: make-ext4fs: explicitely request C collation for sorting 2015-12-02 16:10:09 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk gcc: remove version 4.6, it is no longer needed 2015-11-10 21:10:53 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org