Openwrt

Openwrt build for Asrock G10 Router

Go to file

Stefan Weil d0619fb02c Remove existing old link before creating a new one This is needed after a kernel update, otherwise the new link is written as linux/linux-$(LINUX_VERSION). Signed-off-by: Stefan Weil <sw@weilnetz.de>		2016-07-25 10:39:27 +02:00
config	apm821xx: use lzma compression for the initramfs images	2016-07-25 10:38:11 +02:00
docs
include	image.mk: create default ubifs before calling legacy image build code	2016-07-22 13:58:58 +02:00
package	ath9k: remove intermediate queueing patch until it is fixed properly	2016-07-24 22:41:20 +02:00
scripts	scripts/getver.sh: fix older git versions from printing stuff to stdout	2016-07-16 20:50:56 +02:00
target	apm821xx: fix atheros PCIe cards on the MR24	2016-07-25 10:38:48 +02:00
toolchain	Remove existing old link before creating a new one	2016-07-25 10:39:27 +02:00
tools	tools: bring back genext2fs for apm821xx	2016-07-23 19:37:20 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds.conf: disable the targets feed by default	2016-07-17 16:57:54 +02:00
LICENSE
Makefile	build: fix make clean, delete package directories for selected arch	2016-05-11 10:02:36 +02:00
README	README: Update project README	2016-05-12 03:29:36 +02:00
rules.mk

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org