Openwrt build for Asrock G10 Router
cf69472fb1
This commit removes changes from upstream commits: 8e18c8e58da6 arm64: dts: marvell: armada-3720-espressobin: declare SATA PHY property bd3d25b07342 arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs For most boards which have factory bootloader this caused that devices connected to USB 3.0 and SATA port were not detected. For them to function users would need to upgrade the bootloader to version with ARM Trusted Firmware 2.1 or later. Unfortunately there is no official bootloader image with updated ATF component, therefore drop these properties from nodes. This change was also tested briefly with bootloader with updated ATF and the ports functioned properly. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org