Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin cd96421b19 kexec-tools: bump version from v2.0.4 to v2.0.9. - kexec-tools is now distributed with tarballs of .tar.gz and .tar.xz format; .tar.bz2 are not provided anymore. - Add CONFIG_KEXEC_LZMA for selecting lzma support. Patches are updated along to: - Remove the now unnecessary patch 0004-mips_regdefs.patch. - Drop 100-reduce_size.patch because the size reduction is marginal. - Allow zlib and lzma support coexist together. This patch has been merged into upstream project. - Fix kexec-tools' configure.ac. - Fix a few compilation warnings. Size comparison of stripped binaries of kexec malta target with both zlib and lzma support enabled. - Before: 41447 - After: 42583 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 44437		2015-02-13 07:42:13 +00:00
config	config: disable kernel tracing on uml	2015-02-11 11:31:26 +00:00
docs
include	kernel: switch 3.19 from -rc5 to release .0	2015-02-10 22:36:59 +00:00
package	kexec-tools: bump version from v2.0.4 to v2.0.9.	2015-02-13 07:42:13 +00:00
scripts	scripts: extend rstrip.sh to remove bad rpaths	2015-02-10 15:48:48 +00:00
target	brcm2708: fix spidev	2015-02-13 07:38:33 +00:00
toolchain	toolchain/gcc: fix an ICE on ARM (PR58595)	2015-02-11 11:30:56 +00:00
tools	tools: add patchelf host build	2015-02-10 15:48:32 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: don't add staging_dir/host/bin/ path again	2015-02-10 15:49:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org