52 lines
1.6 KiB
Diff
52 lines
1.6 KiB
Diff
After applying the following changes I could verify functionality by
|
|
mounting a filesystem on the cfdisk and reading/writing files in it.
|
|
|
|
The set_irq_type() function must be wrong, as there is no set_type()
|
|
function defined for the rb532 IRQ chip. But as the used IRQ actually is
|
|
being triggered by a GPIO, setting it's interrupt level should be the
|
|
right alternative. Also to clear a GPIO triggered IRQ, the source has to
|
|
be cleared. This is being done at the end of rb532_pata_irq_handler.
|
|
|
|
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
|
|
Acked-by: Florian Fainelli <florian@openwrt.org>
|
|
---
|
|
--- a/drivers/ata/pata_rb532_cf.c
|
|
+++ b/drivers/ata/pata_rb532_cf.c
|
|
@@ -31,6 +31,7 @@
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <asm/gpio.h>
|
|
+#include <asm/mach-rc32434/gpio.h>
|
|
|
|
#define DRV_NAME "pata-rb532-cf"
|
|
#define DRV_VERSION "0.1.0"
|
|
@@ -63,8 +64,8 @@ static inline void rb532_pata_finish_io(
|
|
ata_sff_sync might be sufficient. */
|
|
ata_sff_dma_pause(ap);
|
|
ndelay(RB500_CF_IO_DELAY);
|
|
-
|
|
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
|
|
+
|
|
+ rb532_gpio_set_ilevel(1, info->gpio_line);
|
|
}
|
|
|
|
static void rb532_pata_exec_command(struct ata_port *ap,
|
|
@@ -113,13 +114,15 @@ static irqreturn_t rb532_pata_irq_handle
|
|
struct rb532_cf_info *info = ah->private_data;
|
|
|
|
if (gpio_get_value(info->gpio_line)) {
|
|
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
|
|
+ rb532_gpio_set_ilevel(0, info->gpio_line);
|
|
if (!info->frozen)
|
|
ata_sff_interrupt(info->irq, dev_instance);
|
|
} else {
|
|
- set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
|
|
+ rb532_gpio_set_ilevel(1, info->gpio_line);
|
|
}
|
|
|
|
+ rb532_gpio_set_istat(0, info->gpio_line);
|
|
+
|
|
return IRQ_HANDLED;
|
|
}
|
|
|