Openwrt

Openwrt build for Asrock G10 Router

Go to file

Travis Kemen cb9c37af38 Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image. Signed off by: Matthias Buecher <mail@maddes.net> SVN-Revision: 19596		2010-02-12 01:40:57 +00:00
docs
include	update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolar	2010-02-12 01:12:11 +00:00
package	Here is LVM support for OpenWRT. It introduces 3 new packages: - kmod-dm for the device mapper kernel module. - kmod-libdevmapper for the device-mapper library. - kmod-lvm2 for the lvm tool. Note that it currently does not create the symlinks for all the lvm tools, so you have to use lvm pvs rather than just pvs. Thanks Stefan Monnier	2010-02-12 01:37:02 +00:00
scripts	preinit: fix #6596 Setting LAN IP Address in menuconfig is ignored	2010-01-29 20:30:21 +00:00
target	Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image.	2010-02-12 01:40:57 +00:00
toolchain	the CS toolchain FTBS for the gemini, use the old one for now	2010-02-08 21:26:54 +00:00
tools	Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image.	2010-02-12 01:40:57 +00:00
.gitignore	.gitignore: ignore vim swap files	2009-12-16 13:39:52 +00:00
BSDmakefile
Config.in	with no users left, remove support for 2.6.21	2010-02-11 08:37:57 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	add a config item to specify arguments to strip	2010-01-22 08:12:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org