992 lines
32 KiB
C
992 lines
32 KiB
C
/*
|
|
* AR6K device layer that handles register level I/O
|
|
*
|
|
* Copyright (c) 2007 Atheros Communications Inc.
|
|
* All rights reserved.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation;
|
|
*
|
|
* Software distributed under the License is distributed on an "AS
|
|
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
|
|
* implied. See the License for the specific language governing
|
|
* rights and limitations under the License.
|
|
*
|
|
*
|
|
*
|
|
*/
|
|
#include "a_config.h"
|
|
#include "athdefs.h"
|
|
#include "a_types.h"
|
|
#include "AR6Khwreg.h"
|
|
#include "a_osapi.h"
|
|
#include "a_debug.h"
|
|
#include "hif.h"
|
|
#include "htc_packet.h"
|
|
#include "ar6k.h"
|
|
|
|
#define MAILBOX_FOR_BLOCK_SIZE 1
|
|
|
|
extern A_UINT32 resetok;
|
|
|
|
static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
|
|
static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
|
|
|
|
#define LOCK_AR6K(p) A_MUTEX_LOCK(&(p)->Lock);
|
|
#define UNLOCK_AR6K(p) A_MUTEX_UNLOCK(&(p)->Lock);
|
|
|
|
void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
|
|
{
|
|
LOCK_AR6K(pDev);
|
|
HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
|
|
UNLOCK_AR6K(pDev);
|
|
}
|
|
|
|
HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
|
|
{
|
|
HTC_PACKET *pPacket;
|
|
|
|
LOCK_AR6K(pDev);
|
|
pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
|
|
UNLOCK_AR6K(pDev);
|
|
|
|
return pPacket;
|
|
}
|
|
|
|
A_STATUS DevSetup(AR6K_DEVICE *pDev)
|
|
{
|
|
A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
|
|
A_UINT32 blocksizes[AR6K_MAILBOXES];
|
|
A_STATUS status = A_OK;
|
|
int i;
|
|
|
|
AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
|
|
AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
|
|
|
|
do {
|
|
/* give a handle to HIF for this target */
|
|
HIFSetHandle(pDev->HIFDevice, (void *)pDev);
|
|
/* initialize our free list of IO packets */
|
|
INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
|
|
A_MUTEX_INIT(&pDev->Lock);
|
|
|
|
/* get the addresses for all 4 mailboxes */
|
|
status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
|
|
mailboxaddrs, sizeof(mailboxaddrs));
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* carve up register I/O packets (these are for ASYNC register I/O ) */
|
|
for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
|
|
HTC_PACKET *pIOPacket;
|
|
pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
|
|
SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
|
|
pDev,
|
|
pDev->RegIOBuffers[i].Buffer,
|
|
AR6K_REG_IO_BUFFER_SIZE,
|
|
0); /* don't care */
|
|
AR6KFreeIOPacket(pDev,pIOPacket);
|
|
}
|
|
|
|
/* get the address of the mailbox we are using */
|
|
pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
|
|
|
|
/* get the block sizes */
|
|
status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
|
|
blocksizes, sizeof(blocksizes));
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* note: we actually get the block size of a mailbox other than 0, for SDIO the block
|
|
* size on mailbox 0 is artificially set to 1. So we use the block size that is set
|
|
* for the other 3 mailboxes */
|
|
pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
|
|
/* must be a power of 2 */
|
|
AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
|
|
|
|
/* assemble mask, used for padding to a block */
|
|
pDev->BlockMask = pDev->BlockSize - 1;
|
|
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
|
|
pDev->BlockSize, pDev->MailboxAddress));
|
|
|
|
pDev->GetPendingEventsFunc = NULL;
|
|
/* see if the HIF layer implements the get pending events function */
|
|
HIFConfigureDevice(pDev->HIFDevice,
|
|
HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
|
|
&pDev->GetPendingEventsFunc,
|
|
sizeof(pDev->GetPendingEventsFunc));
|
|
|
|
/* assume we can process HIF interrupt events asynchronously */
|
|
pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
|
|
|
|
/* see if the HIF layer overrides this assumption */
|
|
HIFConfigureDevice(pDev->HIFDevice,
|
|
HIF_DEVICE_GET_IRQ_PROC_MODE,
|
|
&pDev->HifIRQProcessingMode,
|
|
sizeof(pDev->HifIRQProcessingMode));
|
|
|
|
switch (pDev->HifIRQProcessingMode) {
|
|
case HIF_DEVICE_IRQ_SYNC_ONLY:
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
|
|
break;
|
|
case HIF_DEVICE_IRQ_ASYNC_SYNC:
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
|
|
break;
|
|
default:
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
}
|
|
|
|
pDev->HifMaskUmaskRecvEvent = NULL;
|
|
|
|
/* see if the HIF layer implements the mask/unmask recv events function */
|
|
HIFConfigureDevice(pDev->HIFDevice,
|
|
HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
|
|
&pDev->HifMaskUmaskRecvEvent,
|
|
sizeof(pDev->HifMaskUmaskRecvEvent));
|
|
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
|
|
(A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
|
|
|
|
status = DevDisableInterrupts(pDev);
|
|
|
|
} while (FALSE);
|
|
|
|
if (A_FAILED(status)) {
|
|
/* make sure handle is cleared */
|
|
HIFSetHandle(pDev->HIFDevice, NULL);
|
|
}
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
|
|
{
|
|
A_STATUS status;
|
|
AR6K_IRQ_ENABLE_REGISTERS regs;
|
|
|
|
LOCK_AR6K(pDev);
|
|
|
|
/* Enable all the interrupts except for the dragon interrupt */
|
|
pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
|
|
INT_STATUS_ENABLE_CPU_SET(0x01) |
|
|
INT_STATUS_ENABLE_COUNTER_SET(0x01);
|
|
|
|
if (NULL == pDev->GetPendingEventsFunc) {
|
|
pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
|
|
} else {
|
|
/* The HIF layer provided us with a pending events function which means that
|
|
* the detection of pending mbox messages is handled in the HIF layer.
|
|
* This is the case for the SPI2 interface.
|
|
* In the normal case we enable MBOX interrupts, for the case
|
|
* with HIFs that offer this mechanism, we keep these interrupts
|
|
* masked */
|
|
pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
|
|
}
|
|
|
|
|
|
/* Set up the CPU Interrupt Status Register */
|
|
pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
|
|
|
|
/* Set up the Error Interrupt Status Register */
|
|
pDev->IrqEnableRegisters.error_status_enable =
|
|
ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
|
|
ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
|
|
|
|
/* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
|
|
pDev->IrqEnableRegisters.counter_int_status_enable =
|
|
COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
|
|
|
|
/* copy into our temp area */
|
|
A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
|
|
|
|
UNLOCK_AR6K(pDev);
|
|
|
|
/* always synchronous */
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
INT_STATUS_ENABLE_ADDRESS,
|
|
®s.int_status_enable,
|
|
AR6K_IRQ_ENABLE_REGS_SIZE,
|
|
HIF_WR_SYNC_BYTE_INC,
|
|
NULL);
|
|
|
|
if (status != A_OK) {
|
|
/* Can't write it for some reason */
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
|
|
("Failed to update interrupt control registers err: %d\n", status));
|
|
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
|
|
{
|
|
AR6K_IRQ_ENABLE_REGISTERS regs;
|
|
|
|
LOCK_AR6K(pDev);
|
|
/* Disable all interrupts */
|
|
pDev->IrqEnableRegisters.int_status_enable = 0;
|
|
pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
|
|
pDev->IrqEnableRegisters.error_status_enable = 0;
|
|
pDev->IrqEnableRegisters.counter_int_status_enable = 0;
|
|
/* copy into our temp area */
|
|
A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
|
|
|
|
UNLOCK_AR6K(pDev);
|
|
|
|
/* always synchronous */
|
|
return HIFReadWrite(pDev->HIFDevice,
|
|
INT_STATUS_ENABLE_ADDRESS,
|
|
®s.int_status_enable,
|
|
AR6K_IRQ_ENABLE_REGS_SIZE,
|
|
HIF_WR_SYNC_BYTE_INC,
|
|
NULL);
|
|
}
|
|
|
|
/* enable device interrupts */
|
|
A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
|
|
{
|
|
/* Unmask the host controller interrupts */
|
|
HIFUnMaskInterrupt(pDev->HIFDevice);
|
|
|
|
return DevEnableInterrupts(pDev);
|
|
}
|
|
|
|
/* disable all device interrupts */
|
|
A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
|
|
{
|
|
A_STATUS status;
|
|
|
|
status = DevDisableInterrupts(pDev);
|
|
|
|
if (A_SUCCESS(status)) {
|
|
/* Disable the interrupt at the HIF layer */
|
|
HIFMaskInterrupt(pDev->HIFDevice);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* callback when our fetch to enable/disable completes */
|
|
static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
|
|
{
|
|
AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
|
|
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
|
|
|
|
if (A_FAILED(pPacket->Status)) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
|
|
(" Failed to disable receiver, status:%d \n", pPacket->Status));
|
|
}
|
|
/* free this IO packet */
|
|
AR6KFreeIOPacket(pDev,pPacket);
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
|
|
}
|
|
|
|
/* disable packet reception (used in case the host runs out of buffers)
|
|
* this is the "override" method when the HIF reports another methods to
|
|
* disable recv events */
|
|
static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
|
|
{
|
|
A_STATUS status = A_OK;
|
|
HTC_PACKET *pIOPacket = NULL;
|
|
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
|
|
EnableRecv,AsyncMode));
|
|
|
|
do {
|
|
|
|
if (AsyncMode) {
|
|
|
|
pIOPacket = AR6KAllocIOPacket(pDev);
|
|
|
|
if (NULL == pIOPacket) {
|
|
status = A_NO_MEMORY;
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* stick in our completion routine when the I/O operation completes */
|
|
pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
|
|
pIOPacket->pContext = pDev;
|
|
|
|
/* call the HIF layer override and do this asynchronously */
|
|
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
|
|
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
|
|
pIOPacket);
|
|
break;
|
|
}
|
|
|
|
/* if we get here we are doing it synchronously */
|
|
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
|
|
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
|
|
NULL);
|
|
|
|
} while (FALSE);
|
|
|
|
if (A_FAILED(status) && (pIOPacket != NULL)) {
|
|
AR6KFreeIOPacket(pDev,pIOPacket);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/* disable packet reception (used in case the host runs out of buffers)
|
|
* this is the "normal" method using the interrupt enable registers through
|
|
* the host I/F */
|
|
static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
|
|
{
|
|
A_STATUS status = A_OK;
|
|
HTC_PACKET *pIOPacket = NULL;
|
|
AR6K_IRQ_ENABLE_REGISTERS regs;
|
|
|
|
/* take the lock to protect interrupt enable shadows */
|
|
LOCK_AR6K(pDev);
|
|
|
|
if (EnableRecv) {
|
|
pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
|
|
} else {
|
|
pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
|
|
}
|
|
|
|
/* copy into our temp area */
|
|
A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
|
|
UNLOCK_AR6K(pDev);
|
|
|
|
do {
|
|
|
|
if (AsyncMode) {
|
|
|
|
pIOPacket = AR6KAllocIOPacket(pDev);
|
|
|
|
if (NULL == pIOPacket) {
|
|
status = A_NO_MEMORY;
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* copy values to write to our async I/O buffer */
|
|
A_MEMCPY(pIOPacket->pBuffer,®s,AR6K_IRQ_ENABLE_REGS_SIZE);
|
|
|
|
/* stick in our completion routine when the I/O operation completes */
|
|
pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
|
|
pIOPacket->pContext = pDev;
|
|
|
|
/* write it out asynchronously */
|
|
HIFReadWrite(pDev->HIFDevice,
|
|
INT_STATUS_ENABLE_ADDRESS,
|
|
pIOPacket->pBuffer,
|
|
AR6K_IRQ_ENABLE_REGS_SIZE,
|
|
HIF_WR_ASYNC_BYTE_INC,
|
|
pIOPacket);
|
|
break;
|
|
}
|
|
|
|
/* if we get here we are doing it synchronously */
|
|
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
INT_STATUS_ENABLE_ADDRESS,
|
|
®s.int_status_enable,
|
|
AR6K_IRQ_ENABLE_REGS_SIZE,
|
|
HIF_WR_SYNC_BYTE_INC,
|
|
NULL);
|
|
|
|
} while (FALSE);
|
|
|
|
if (A_FAILED(status) && (pIOPacket != NULL)) {
|
|
AR6KFreeIOPacket(pDev,pIOPacket);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
|
|
{
|
|
if (NULL == pDev->HifMaskUmaskRecvEvent) {
|
|
return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
|
|
} else {
|
|
return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
|
|
}
|
|
}
|
|
|
|
A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
|
|
{
|
|
if (NULL == pDev->HifMaskUmaskRecvEvent) {
|
|
return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
|
|
} else {
|
|
return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
|
|
}
|
|
}
|
|
|
|
void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs,
|
|
AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
|
|
{
|
|
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
|
|
|
|
if (pIrqProcRegs != NULL) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Int Status: 0x%x\n",pIrqProcRegs->host_int_status));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0]));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1]));
|
|
}
|
|
|
|
if (pIrqEnableRegs != NULL) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
|
|
("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
|
|
}
|
|
}
|
|
|
|
|
|
#ifdef MBOXHW_UNIT_TEST
|
|
|
|
|
|
/* This is a mailbox hardware unit test that must be called in a schedulable context
|
|
* This test is very simple, it will send a list of buffers with a counting pattern
|
|
* and the target will invert the data and send the message back
|
|
*
|
|
* the unit test has the following constraints:
|
|
*
|
|
* The target has at least 8 buffers of 256 bytes each. The host will send
|
|
* the following pattern of buffers in rapid succession :
|
|
*
|
|
* 1 buffer - 128 bytes
|
|
* 1 buffer - 256 bytes
|
|
* 1 buffer - 512 bytes
|
|
* 1 buffer - 1024 bytes
|
|
*
|
|
* The host will send the buffers to one mailbox and wait for buffers to be reflected
|
|
* back from the same mailbox. The target sends the buffers FIFO order.
|
|
* Once the final buffer has been received for a mailbox, the next mailbox is tested.
|
|
*
|
|
*
|
|
* Note: To simplifythe test , we assume that the chosen buffer sizes
|
|
* will fall on a nice block pad
|
|
*
|
|
* It is expected that higher-order tests will be written to stress the mailboxes using
|
|
* a message-based protocol (with some performance timming) that can create more
|
|
* randomness in the packets sent over mailboxes.
|
|
*
|
|
* */
|
|
|
|
#define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1))
|
|
|
|
#define BUFFER_BLOCK_PAD 128
|
|
|
|
#if 0
|
|
#define BUFFER1 128
|
|
#define BUFFER2 256
|
|
#define BUFFER3 512
|
|
#define BUFFER4 1024
|
|
#endif
|
|
|
|
#if 1
|
|
#define BUFFER1 80
|
|
#define BUFFER2 200
|
|
#define BUFFER3 444
|
|
#define BUFFER4 800
|
|
#endif
|
|
|
|
#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
|
|
A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
|
|
A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
|
|
A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
|
|
|
|
#define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4)
|
|
|
|
#define TEST_CREDITS_RECV_TIMEOUT 100
|
|
|
|
static A_UINT8 g_Buffer[TOTAL_BYTES];
|
|
static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
|
|
static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
|
|
|
|
#define BUFFER_PROC_LIST_DEPTH 4
|
|
|
|
typedef struct _BUFFER_PROC_LIST{
|
|
A_UINT8 *pBuffer;
|
|
A_UINT32 length;
|
|
}BUFFER_PROC_LIST;
|
|
|
|
|
|
#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
|
|
{ \
|
|
(pList)->pBuffer = (pCurrpos); \
|
|
(pList)->length = (len); \
|
|
(pCurrpos) += (len); \
|
|
(pList)++; \
|
|
}
|
|
|
|
/* a simple and crude way to send different "message" sizes */
|
|
static void AssembleBufferList(BUFFER_PROC_LIST *pList)
|
|
{
|
|
A_UINT8 *pBuffer = g_Buffer;
|
|
|
|
#if BUFFER_PROC_LIST_DEPTH < 4
|
|
#error "Buffer processing list depth is not deep enough!!"
|
|
#endif
|
|
|
|
PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
|
|
PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
|
|
PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
|
|
PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
|
|
|
|
}
|
|
|
|
#define FILL_ZERO TRUE
|
|
#define FILL_COUNTING FALSE
|
|
static void InitBuffers(A_BOOL Zero)
|
|
{
|
|
A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
|
|
int i;
|
|
|
|
/* fill buffer with 16 bit counting pattern or zeros */
|
|
for (i = 0; i < (TOTAL_BYTES / 2) ; i++) {
|
|
if (!Zero) {
|
|
pBuffer16[i] = (A_UINT16)i;
|
|
} else {
|
|
pBuffer16[i] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
|
|
{
|
|
int i;
|
|
A_UINT16 startCount;
|
|
A_BOOL success = TRUE;
|
|
|
|
/* get the starting count */
|
|
startCount = pBuffer16[0];
|
|
/* invert it, this is the expected value */
|
|
startCount = ~startCount;
|
|
/* scan the buffer and verify */
|
|
for (i = 0; i < (Length / 2) ; i++,startCount++) {
|
|
/* target will invert all the data */
|
|
if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
|
|
success = FALSE;
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
|
|
pBuffer16[i], ((A_UINT16)~startCount), i, Length));
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
|
|
pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return success;
|
|
}
|
|
|
|
static A_BOOL CheckBuffers(void)
|
|
{
|
|
int i;
|
|
A_BOOL success = TRUE;
|
|
BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
|
|
|
|
/* assemble the list */
|
|
AssembleBufferList(checkList);
|
|
|
|
/* scan the buffers and verify */
|
|
for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
|
|
success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
|
|
if (!success) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
|
|
(A_UINT32)checkList[i].pBuffer, checkList[i].length));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return success;
|
|
}
|
|
|
|
/* find the end marker for the last buffer we will be sending */
|
|
static A_UINT16 GetEndMarker(void)
|
|
{
|
|
A_UINT8 *pBuffer;
|
|
BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
|
|
|
|
/* fill up buffers with the normal counting pattern */
|
|
InitBuffers(FILL_COUNTING);
|
|
|
|
/* assemble the list we will be sending down */
|
|
AssembleBufferList(checkList);
|
|
/* point to the last 2 bytes of the last buffer */
|
|
pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
|
|
|
|
/* the last count in the last buffer is the marker */
|
|
return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
|
|
}
|
|
|
|
#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
|
|
|
|
/* send the ordered buffers to the target */
|
|
static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
|
|
{
|
|
A_STATUS status = A_OK;
|
|
A_UINT32 request = HIF_WR_SYNC_BLOCK_INC;
|
|
BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
|
|
int i;
|
|
int totalBytes = 0;
|
|
int paddedLength;
|
|
int totalwPadding = 0;
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
|
|
|
|
/* fill buffer with counting pattern */
|
|
InitBuffers(FILL_COUNTING);
|
|
|
|
/* assemble the order in which we send */
|
|
AssembleBufferList(sendList);
|
|
|
|
for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
|
|
|
|
/* we are doing block transfers, so we need to pad everything to a block size */
|
|
paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
|
|
(~(g_BlockSizes[mbox] - 1));
|
|
|
|
/* send each buffer synchronously */
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
g_MailboxAddrs[mbox],
|
|
sendList[i].pBuffer,
|
|
paddedLength,
|
|
request,
|
|
NULL);
|
|
if (status != A_OK) {
|
|
break;
|
|
}
|
|
totalBytes += sendList[i].length;
|
|
totalwPadding += paddedLength;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
|
|
|
|
return status;
|
|
}
|
|
|
|
/* poll the mailbox credit counter until we get a credit or timeout */
|
|
static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
|
|
{
|
|
A_STATUS status = A_OK;
|
|
int timeout = TEST_CREDITS_RECV_TIMEOUT;
|
|
A_UINT8 credits = 0;
|
|
A_UINT32 address;
|
|
|
|
while (TRUE) {
|
|
|
|
/* Read the counter register to get credits, this auto-decrements */
|
|
address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
|
|
status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
|
|
HIF_RD_SYNC_BYTE_FIX, NULL);
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
|
|
("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
|
|
status = A_ERROR;
|
|
break;
|
|
}
|
|
|
|
if (credits) {
|
|
break;
|
|
}
|
|
|
|
timeout--;
|
|
|
|
if (timeout <= 0) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
|
|
(" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
|
|
status = A_ERROR;
|
|
break;
|
|
}
|
|
|
|
/* delay a little, target may not be ready */
|
|
msleep(1000);
|
|
|
|
}
|
|
|
|
if (status == A_OK) {
|
|
*pCredits = credits;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
/* wait for the buffers to come back */
|
|
static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
|
|
{
|
|
A_STATUS status = A_OK;
|
|
A_UINT32 request = HIF_RD_SYNC_BLOCK_INC;
|
|
BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
|
|
int curBuffer;
|
|
int credits;
|
|
int i;
|
|
int totalBytes = 0;
|
|
int paddedLength;
|
|
int totalwPadding = 0;
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
|
|
|
|
/* zero the buffers */
|
|
InitBuffers(FILL_ZERO);
|
|
|
|
/* assemble the order in which we should receive */
|
|
AssembleBufferList(recvList);
|
|
|
|
curBuffer = 0;
|
|
|
|
while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
|
|
|
|
/* get number of buffers that have been completed, this blocks
|
|
* until we get at least 1 credit or it times out */
|
|
status = GetCredits(pDev, mbox, &credits);
|
|
|
|
if (status != A_OK) {
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
|
|
|
|
/* get all the buffers that are sitting on the queue */
|
|
for (i = 0; i < credits; i++) {
|
|
AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
|
|
/* recv the current buffer synchronously, the buffers should come back in
|
|
* order... with padding applied by the target */
|
|
paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
|
|
(~(g_BlockSizes[mbox] - 1));
|
|
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
g_MailboxAddrs[mbox],
|
|
recvList[curBuffer].pBuffer,
|
|
paddedLength,
|
|
request,
|
|
NULL);
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
|
|
recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
|
|
break;
|
|
}
|
|
|
|
totalwPadding += paddedLength;
|
|
totalBytes += recvList[curBuffer].length;
|
|
curBuffer++;
|
|
}
|
|
|
|
if (status != A_OK) {
|
|
break;
|
|
}
|
|
/* go back and get some more */
|
|
credits = 0;
|
|
}
|
|
|
|
if (totalBytes != TEST_BYTES) {
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
} else {
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
|
|
mbox, totalBytes, totalwPadding));
|
|
}
|
|
|
|
return status;
|
|
|
|
|
|
}
|
|
|
|
static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
|
|
{
|
|
A_STATUS status;
|
|
|
|
do {
|
|
/* send out buffers */
|
|
status = SendBuffers(pDev,mbox);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
|
|
break;
|
|
}
|
|
|
|
/* go get them, this will block */
|
|
status = RecvBuffers(pDev, mbox);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
|
|
break;
|
|
}
|
|
|
|
/* check the returned data patterns */
|
|
if (!CheckBuffers()) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
|
|
status = A_ERROR;
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
|
|
|
|
} while (FALSE);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* here is where the test starts */
|
|
A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
|
|
{
|
|
int i;
|
|
A_STATUS status;
|
|
int credits = 0;
|
|
A_UINT8 params[4];
|
|
int numBufs;
|
|
int bufferSize;
|
|
A_UINT16 temp;
|
|
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n"));
|
|
|
|
do {
|
|
/* get the addresses for all 4 mailboxes */
|
|
status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
|
|
g_MailboxAddrs, sizeof(g_MailboxAddrs));
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* get the block sizes */
|
|
status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
|
|
g_BlockSizes, sizeof(g_BlockSizes));
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
/* note, the HIF layer usually reports mbox 0 to have a block size of
|
|
* 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
|
|
* the same. */
|
|
g_BlockSizes[0] = g_BlockSizes[1];
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
|
|
|
|
if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
|
|
g_BlockSizes[1], BUFFER_BLOCK_PAD));
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
|
|
|
|
/* the target lets us know it is ready by giving us 1 credit on
|
|
* mailbox 0 */
|
|
status = GetCredits(pDev, 0, &credits);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
|
|
|
|
/* read the first 4 scratch registers */
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
SCRATCH_ADDRESS,
|
|
params,
|
|
4,
|
|
HIF_RD_SYNC_BYTE_INC,
|
|
NULL);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
|
|
break;
|
|
}
|
|
|
|
numBufs = params[0];
|
|
bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
|
|
("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
|
|
numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
|
|
|
|
if ((numBufs * bufferSize) < TOTAL_BYTES) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
|
|
TOTAL_BYTES, (numBufs*bufferSize)));
|
|
status = A_ERROR;
|
|
break;
|
|
}
|
|
|
|
temp = GetEndMarker();
|
|
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
SCRATCH_ADDRESS + 4,
|
|
(A_UINT8 *)&temp,
|
|
2,
|
|
HIF_WR_SYNC_BYTE_INC,
|
|
NULL);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
|
|
|
|
temp = (A_UINT16)g_BlockSizes[1];
|
|
/* convert to a mask */
|
|
temp = temp - 1;
|
|
status = HIFReadWrite(pDev->HIFDevice,
|
|
SCRATCH_ADDRESS + 6,
|
|
(A_UINT8 *)&temp,
|
|
2,
|
|
HIF_WR_SYNC_BYTE_INC,
|
|
NULL);
|
|
|
|
if (status != A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
|
|
break;
|
|
}
|
|
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
|
|
|
|
/* execute the test on each mailbox */
|
|
for (i = 0; i < AR6K_MAILBOXES; i++) {
|
|
status = DoOneMboxHWTest(pDev, i);
|
|
if (status != A_OK) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
} while (FALSE);
|
|
|
|
if (status == A_OK) {
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n"));
|
|
} else {
|
|
AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n"));
|
|
}
|
|
/* don't let HTC_Start continue, the target is actually not running any HTC code */
|
|
return A_ERROR;
|
|
}
|
|
#endif
|
|
|
|
|
|
|