Openwrt/tools/firmware-utils/Makefile
NOGUCHI Hiroshi a1c6a316d2 ramips: add support for Fon FON2601
FON2601 is a wireless router.

Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
   for 11b/g/n (upto 300 Mbps):  MT7620A built-in WMAC
   for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
 pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)

Installation (only available via UART):
  1. download sysupgrade binary image by wget command
  2. write sysupgrade binary image to Flash
     command is:
       mtd write sysupgrade.bin firmware
  3. reboot

Important Notice:
  Only one button is displayed as "WPS" on enclosure.
  However, it is configured as "reset" (factory resetting feature).

Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00

103 lines
2.7 KiB
Makefile

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME := firmware-utils
include $(INCLUDE_DIR)/host-build.mk
include $(INCLUDE_DIR)/kernel.mk
define cc
$(HOSTCC) \
$(HOST_CFLAGS) \
-Wno-unused-parameter \
-include endian.h $(HOST_LDFLAGS) \
-o $(HOST_BUILD_DIR)/bin/$(firstword $(1)) \
$(foreach src,$(1),src/$(src).c) \
$(2)
endef
define Host/Compile
mkdir -p $(HOST_BUILD_DIR)/bin
$(call cc,addpattern)
$(call cc,asustrx)
$(call cc,trx)
$(call cc,otrx)
$(call cc,motorola-bin)
$(call cc,dgfirmware)
$(call cc,mksenaofw md5, -Wall --std=gnu99)
$(call cc,trx2usr)
$(call cc,ptgen)
$(call cc,srec2bin)
$(call cc,mkmylofw)
$(call cc,mkcsysimg)
$(call cc,mkzynfw)
$(call cc,lzma2eva,-lz)
$(call cc,mkcasfw)
$(call cc,mkfwimage,-lz -Wall -Werror -Wextra -D_FILE_OFFSET_BITS=64)
$(call cc,mkfwimage2,-lz)
$(call cc,imagetag imagetag_cmdline cyg_crc32)
$(call cc,add_header)
$(call cc,makeamitbin)
$(call cc,encode_crc)
$(call cc,nand_ecc)
$(call cc,mkplanexfw sha1)
$(call cc,mktplinkfw mktplinkfw-lib md5, -Wall -fgnu89-inline)
$(call cc,mktplinkfw2 mktplinkfw-lib md5, -fgnu89-inline)
$(call cc,tplink-safeloader md5, -Wall --std=gnu99)
$(call cc,pc1crypt)
$(call cc,osbridge-crc)
$(call cc,wrt400n cyg_crc32)
$(call cc,mkdniimg)
$(call cc,mktitanimg)
$(call cc,mkchkimg)
$(call cc,mkzcfw cyg_crc32)
$(call cc,spw303v)
$(call cc,zyxbcm)
$(call cc,trx2edips)
$(call cc,xorimage)
$(call cc,buffalo-enc buffalo-lib, -Wall)
$(call cc,buffalo-tag buffalo-lib, -Wall)
$(call cc,buffalo-tftp buffalo-lib, -Wall)
$(call cc,mkwrgimg md5, -Wall)
$(call cc,mkwrggimg md5, -Wall)
$(call cc,mkedimaximg)
$(call cc,mkbrncmdline)
$(call cc,mkbrnimg)
$(call cc,mkdapimg)
$(call cc,mkdapimg2)
$(call cc, mkcameofw, -Wall)
$(call cc,seama md5)
$(call cc,oseama md5, -Wall)
$(call cc,fix-u-media-header cyg_crc32,-Wall)
$(call cc,hcsmakeimage bcmalgo)
$(call cc,mkporayfw, -Wall)
$(call cc,mkrasimage, --std=gnu99)
$(call cc,mkhilinkfw, -lcrypto)
$(call cc,mkheader_gemtek,-lz)
$(call cc,mkrtn56uimg, -lz)
$(call cc,dgn3500sum, -Wall)
$(call cc,edimax_fw_header, -Wall)
$(call cc,mkmerakifw sha1, -Wall)
$(call cc,mkmerakifw-old, -Wall)
$(call cc,jcgimage, -lz -Wall)
$(call cc,mkbuffaloimg, -Wall)
$(call cc,zyimage, -Wall)
$(call cc,mkdhpimg buffalo-lib, -Wall)
$(call cc,mkdlinkfw mkdlinkfw-lib, -lz -Wall --std=c99)
$(call cc,dns313-header, -Wall)
$(call cc,mksercommfw, -Wall)
$(call cc,nec-enc, -Wall --std=gnu99)
$(call cc,uimage_padhdr, -Wall -lz)
endef
define Host/Install
$(INSTALL_BIN) $(HOST_BUILD_DIR)/bin/* $(STAGING_DIR_HOST)/bin/
endef
$(eval $(call HostBuild))