Openwrt/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts
Adrian Schmutzler 50fdc0374b ath79: provide label MAC address
This patch adds the label MAC address for several devices in
ath79.

Some devices require setting the MAC address in 02_network:

For the following devices, the netif device can be linked in
device tree, but the MAC address cannot be read:
- alfa-network,ap121f
- avm,fritz300e
- ubnt-xm devices

For the following devices, label MAC address is tied to lan or
wan, so no node to link to exists in device tree:
- adtran,bsap1800-v2
- adtran,bsap1840
- dlink,dir-842-c1/-c2/-c3
- engenius,ecb1750
- iodata,etg3-r
- iodata,wn-ac1167dgr
- iodata,wn-ac1600dgr
- iodata,wn-ac1600dgr2
- iodata,wn-ag300dgr
- nec,wg800hp
- nec,wg1200cr
- trendnet,tew-823dru

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-19 23:43:27 +02:00

132 lines
2.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9132.dtsi"
/ {
compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
model = "TP-Link TL-WA901ND v2";
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
label-mac-device = &eth0;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
qss {
label = "qss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
system: system {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
};
wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@1 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x3D0000>;
};
art: partition@2 {
label = "art";
reg = <0x3F0000 0x010000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@c {
reg = <0xc>;
phy-mode = "mii";
};
};
&eth0 {
status = "okay";
phy-mode = "mii";
mtd-mac-address = <&uboot 0x1fc00>;
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};