Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau c2590fe930 strip kernel modules more aggressively: make all global symbols local, rename all symbols in the symbol table to make them compress better SVN-Revision: 30662		2012-02-20 17:38:26 +00:00
docs
include	quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure	2012-02-13 15:31:28 +00:00
package	add gpio-button-hotplug, like button-hotplug + gpio-keys-polled, fully compatible, but without the nasty input-core dependency chain	2012-02-20 10:51:43 +00:00
scripts	strip kernel modules more aggressively: make all global symbols local, rename all symbols in the symbol table to make them compress better	2012-02-20 17:38:26 +00:00
target	ar71xx: switch to kmod-gpio-button-hotplug	2012-02-20 10:51:48 +00:00
toolchain	gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library	2012-02-17 16:55:08 +00:00
tools	firmware-utils/mkfwimage: allow to override firmware magic	2012-02-18 14:45:54 +00:00
.gitignore
BSDmakefile
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
feeds.conf.default
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	strip kernel modules more aggressively: make all global symbols local, rename all symbols in the symbol table to make them compress better	2012-02-20 17:38:26 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org