Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich bcacf552fd netifd: repair dhcp client id option Busybox udhcpc dropped support for the -c option, instead it can be emulated by using -x 0x3d:id, change the dhcp protocol script accordingly and filter all colons from the id while we're at it. This change supersedes http://patchwork.openwrt.org/patch/1810/ SVN-Revision: 32573		2012-07-01 12:43:14 +00:00
docs
include	include/image.mk: /tmp should have mode 1777	2012-07-01 11:48:54 +00:00
package	netifd: repair dhcp client id option Busybox udhcpc dropped support for the -c option, instead it can be emulated by using -x 0x3d:id, change the dhcp protocol script accordingly and filter all colons from the id while we're at it. This change supersedes http://patchwork.openwrt.org/patch/1810/	2012-07-01 12:43:14 +00:00
scripts	scripts/feeds: redirect stderr of the which call to /dev/null to avoid potentially confusing error messages on some systems	2012-06-25 00:27:03 +00:00
target	fix watchdog and rng drivers section mismatch (#11767 )	2012-06-29 09:07:54 +00:00
toolchain	uClibc: add -Wno-unused-but-set-variable to get rid of unnecessary warning logspam	2012-06-30 21:44:09 +00:00
tools	tools: sdcc depends on bison	2012-06-29 00:32:43 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	config: tag parallel build options with high build breakage probability with a BROKEN dependency to discourage users from spamming us with tickets about them	2012-06-30 21:44:12 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org