Openwrt

Openwrt build for Asrock G10 Router

Go to file

Andre Heider b69df1eee0 omap: update uboot to 2019.10 All patches have been dropped, they're either redundant (e.g. due to the new and unset CONFIG_SPL_FAT_WRITE), break compilation (thumb hacks) or have been applied upstream. The defconfig for am335x_boneblack has been removed upstream [0], so use am335x_evm for boneblack too. Size changes (before, after, file): ti_am335x-evm and ti_am335x-bone-black: 79804 110832 MLO 623836 756148 u-boot.img ti_omap3-beagle: 54148 57708 MLO 496272 665728 u-boot.img ti_omap4-panda: 39356 40204 MLO 284648 366672 u-boot.img Tested on boneblack, which has the biggest spl size increase. The beagle and panda spl sizes seem reasonable to not break booting. [0] `8fa7f65dd0` Signed-off-by: Andre Heider <a.heider@gmail.com>		2019-11-20 10:46:19 +01:00
.github
config
include	kernel: bump 4.19 to 4.19.84	2019-11-19 14:59:03 +01:00
package	omap: update uboot to 2019.10	2019-11-20 10:46:19 +01:00
scripts	scripts/dl_github_archive.py: fix python3 str, bytes confusion	2019-11-04 11:11:19 +00:00
target	omap: switch to kernel 4.19	2019-11-20 10:46:19 +01:00
toolchain	toolchain/gcc: bump to 7.5.0	2019-11-19 14:59:03 +01:00
tools	ath79: add support for the TP-LINK CPE220 V3	2019-11-06 13:37:40 +01:00
.gitattributes
.gitignore	gitignore: ignore patches in OpenWrt root directory	2019-11-06 00:27:55 +01:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	2019-11-02 20:51:56 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org