Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich b44b066543 firewall: allow incoming udp/68 packets in the default configuration (#4108 , #4781 ) SVN-Revision: 17238		2009-08-13 03:31:53 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	add an optional config option for stripping all unnecessary symbol exports from the kernel image	2009-08-08 14:22:04 +00:00
package	firewall: allow incoming udp/68 packets in the default configuration (#4108 , #4781 )	2009-08-13 03:31:53 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	add missing patch which fakes a cardbus controller on top of PCI, thanks SGDA	2009-08-12 08:41:47 +00:00
toolchain	add gcc 4.3.4	2009-08-07 12:00:25 +00:00
tools	add support for the Pirelli AG226G board (#5337 )	2009-08-09 10:19:47 +00:00
.gitignore
BSDmakefile
Config.in	add an optional config option for stripping all unnecessary symbol exports from the kernel image	2009-08-08 14:22:04 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README
rules.mk	add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later	2009-08-07 21:58:35 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org