Openwrt/target/linux/layerscape/patches-5.4/818-thermal-0003-thermal-qoriq-add-thermal-monitor-unit-version-2-sup.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

212 lines
6.9 KiB
Diff

From 031573a8a1e73b0ac548812c10c3e426c2b4ce61 Mon Sep 17 00:00:00 2001
From: Yuantian Tang <andy.tang@nxp.com>
Date: Tue, 15 Oct 2019 20:08:58 +0800
Subject: [PATCH] thermal: qoriq: add thermal monitor unit version 2 support
Thermal Monitor Unit v2 is introduced on new Layscape SoC.
Compared to v1, TMUv2 has a little different register layout
and digital output is fairly linear.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
Reviewed-by: Anson Huang <Anson.Huang@nxp.com>
---
drivers/thermal/qoriq_thermal.c | 118 ++++++++++++++++++++++++++++++++--------
1 file changed, 96 insertions(+), 22 deletions(-)
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -16,6 +16,15 @@
#define SITES_MAX 16
#define TMU_TEMP_PASSIVE_COOL_DELTA 10000
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+#define TMR_ALPF_V2 0x03000000
+#define TMTMIR_DEFAULT 0x0000000f
+#define TIER_DISABLE 0x0
+#define TEUMR0_V2 0x51009c00
+#define TMU_VER1 0x1
+#define TMU_VER2 0x2
/*
* QorIQ TMU Registers
@@ -26,17 +35,12 @@ struct qoriq_tmu_site_regs {
u8 res0[0x8];
};
-struct qoriq_tmu_regs {
+struct qoriq_tmu_regs_v1 {
u32 tmr; /* Mode Register */
-#define TMR_DISABLE 0x0
-#define TMR_ME 0x80000000
-#define TMR_ALPF 0x0c000000
u32 tsr; /* Status Register */
u32 tmtmir; /* Temperature measurement interval Register */
-#define TMTMIR_DEFAULT 0x0000000f
u8 res0[0x14];
u32 tier; /* Interrupt Enable Register */
-#define TIER_DISABLE 0x0
u32 tidr; /* Interrupt Detect Register */
u32 tiscr; /* Interrupt Site Capture Register */
u32 ticscr; /* Interrupt Critical Site Capture Register */
@@ -56,12 +60,52 @@ struct qoriq_tmu_regs {
u32 ipbrr0; /* IP Block Revision Register 0 */
u32 ipbrr1; /* IP Block Revision Register 1 */
u8 res6[0x310];
- u32 ttr0cr; /* Temperature Range 0 Control Register */
- u32 ttr1cr; /* Temperature Range 1 Control Register */
- u32 ttr2cr; /* Temperature Range 2 Control Register */
- u32 ttr3cr; /* Temperature Range 3 Control Register */
+ u32 ttrcr[4]; /* Temperature Range Control Register */
};
+struct qoriq_tmu_regs_v2 {
+ u32 tmr; /* Mode Register */
+ u32 tsr; /* Status Register */
+ u32 tmsr; /* monitor site register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+ u8 res0[0x10];
+ u32 tier; /* Interrupt Enable Register */
+ u32 tidr; /* Interrupt Detect Register */
+ u8 res1[0x8];
+ u32 tiiscr; /* interrupt immediate site capture register */
+ u32 tiascr; /* interrupt average site capture register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u32 res2;
+ u32 tmhtcr; /* monitor high temperature capture register */
+ u32 tmltcr; /* monitor low temperature capture register */
+ u32 tmrtrcr; /* monitor rising temperature rate capture register */
+ u32 tmftrcr; /* monitor falling temperature rate capture register */
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u32 res3;
+ u32 tmltitr; /* monitor low temperature immediate threshold */
+ u32 tmltatr; /* monitor low temperature average threshold register */
+ u32 tmltactr; /* monitor low temperature average critical threshold */
+ u32 res4;
+ u32 tmrtrctr; /* monitor rising temperature rate critical threshold */
+ u32 tmftrctr; /* monitor falling temperature rate critical threshold*/
+ u8 res5[0x8];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res6[0x78];
+ struct qoriq_tmu_site_regs site[SITES_MAX];
+ u8 res7[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res8[0x300];
+ u32 teumr0;
+ u32 teumr1;
+ u32 teumr2;
+ u32 res9;
+ u32 ttrcr[4]; /* Temperature Range Control Register */
+ };
+
struct qoriq_tmu_data;
/*
@@ -77,7 +121,9 @@ struct qoriq_sensor {
};
struct qoriq_tmu_data {
- struct qoriq_tmu_regs __iomem *regs;
+ int ver;
+ struct qoriq_tmu_regs_v1 __iomem *regs;
+ struct qoriq_tmu_regs_v2 __iomem *regs_v2;
struct clk *clk;
bool little_endian;
struct qoriq_sensor *sensor[SITES_MAX];
@@ -210,12 +256,23 @@ static int qoriq_tmu_register_tmu_zone(s
qdata->sensor[id]->temp_critical = trip[1].temperature;
}
- sites |= 0x1 << (15 - id);
+ if (qdata->ver == TMU_VER1)
+ sites |= 0x1 << (15 - id);
+ else
+ sites |= 0x1 << id;
}
/* Enable monitoring */
- if (sites != 0)
- tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
+ if (sites != 0) {
+ if (qdata->ver == TMU_VER1) {
+ tmu_write(qdata, sites | TMR_ME | TMR_ALPF,
+ &qdata->regs->tmr);
+ } else {
+ tmu_write(qdata, sites, &qdata->regs_v2->tmsr);
+ tmu_write(qdata, TMR_ME | TMR_ALPF_V2,
+ &qdata->regs_v2->tmr);
+ }
+ }
return 0;
}
@@ -228,16 +285,21 @@ static int qoriq_tmu_calibration(struct
struct device_node *np = pdev->dev.of_node;
struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
- if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
- dev_err(&pdev->dev, "missing calibration range.\n");
- return -ENODEV;
+ len = of_property_count_u32_elems(np, "fsl,tmu-range");
+ if (len < 0 || len > 4) {
+ dev_err(&pdev->dev, "invalid range data.\n");
+ return len;
+ }
+
+ val = of_property_read_u32_array(np, "fsl,tmu-range", range, len);
+ if (val != 0) {
+ dev_err(&pdev->dev, "failed to read range data.\n");
+ return val;
}
/* Init temperature range registers */
- tmu_write(data, range[0], &data->regs->ttr0cr);
- tmu_write(data, range[1], &data->regs->ttr1cr);
- tmu_write(data, range[2], &data->regs->ttr2cr);
- tmu_write(data, range[3], &data->regs->ttr3cr);
+ for (i = 0; i < len; i++)
+ tmu_write(data, range[i], &data->regs->ttrcr[i]);
calibration = of_get_property(np, "fsl,tmu-calibration", &len);
if (calibration == NULL || len % 8) {
@@ -261,7 +323,12 @@ static void qoriq_tmu_init_device(struct
tmu_write(data, TIER_DISABLE, &data->regs->tier);
/* Set update_interval */
- tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+ if (data->ver == TMU_VER1) {
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+ } else {
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs_v2->tmtmir);
+ tmu_write(data, TEUMR0_V2, &data->regs_v2->teumr0);
+ }
/* Disable monitoring */
tmu_write(data, TMR_DISABLE, &data->regs->tmr);
@@ -270,6 +337,7 @@ static void qoriq_tmu_init_device(struct
static int qoriq_tmu_probe(struct platform_device *pdev)
{
int ret;
+ u32 ver;
struct qoriq_tmu_data *data;
struct device_node *np = pdev->dev.of_node;
@@ -298,6 +366,12 @@ static int qoriq_tmu_probe(struct platfo
return ret;
}
+ /* version register offset at: 0xbf8 on both v1 and v2 */
+ ver = tmu_read(data, &data->regs->ipbrr0);
+ data->ver = (ver >> 8) & 0xff;
+ if (data->ver == TMU_VER2)
+ data->regs_v2 = (void __iomem *)data->regs;
+
qoriq_tmu_init_device(data); /* TMU initialization */
ret = qoriq_tmu_calibration(pdev); /* TMU calibration */