Openwrt/target/linux/layerscape/patches-5.4/701-net-0393-drivers-net-dsa-felix-Handle-PAUSE-Rx-regardless-of-.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

36 lines
1.3 KiB
Diff

From 774408ea6a55b9d40b7bdc4ff4e33f1464c605c9 Mon Sep 17 00:00:00 2001
From: Alex Marginean <alexandru.marginean@nxp.com>
Date: Wed, 8 Jan 2020 13:15:07 +0200
Subject: [PATCH] drivers: net: dsa: felix: Handle PAUSE Rx regardless of AN
result
Flow control is used with 2500Base-X and AQR PHYs to do rate adapation
between line side 100/1000 links and MAC running at 2.5G. This is
independent of the flow control configuration settled on line side though
AN. In general allowing MAC to handle flow control even though AN did
not enable it explicitly should not be a problem, so the patch enables
it in all cases.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
---
drivers/net/dsa/ocelot/felix.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -267,8 +267,12 @@ static void felix_phylink_mac_config(str
* specification in incoming pause frames.
*/
mac_fc_cfg = SYS_MAC_FC_CFG_FC_LINK_SPEED(state->speed);
- if (state->pause & MLO_PAUSE_RX)
- mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
+
+ /* handle Rx pause in all cases, with 2500base-X this is used for rate
+ * adaptation.
+ */
+ mac_fc_cfg |= SYS_MAC_FC_CFG_RX_FC_ENA;
+
if (state->pause & MLO_PAUSE_TX)
mac_fc_cfg |= SYS_MAC_FC_CFG_TX_FC_ENA |
SYS_MAC_FC_CFG_PAUSE_VAL_CFG(0xffff) |