EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
b0a2e60793
Openwrt/target/linux/mediatek/patches-4.14/0166-mtd-nand-mtk-Support-different-MTK-NAND-flash-contro.patch
Stijn Tintel 64b53247c4 kernel: bump 4.14 to 4.14.44 
Refresh patches.

Remove upstreamed patch:
generic/pending/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
Update patches that no longer applies:
generic/hack/901-debloat_sock_diag.patch

Compile-tested on: x86/64.
Runtime-tested on: x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-05-29 00:53:15 +03:00

381 lines
12 KiB
Diff
Raw Blame History

From fd1a1eabf2473e769b5cafc704e0336d11f61961 Mon Sep 17 00:00:00 2001
From: RogerCC Lin <rogercc.lin@mediatek.com>
Date: Thu, 30 Nov 2017 22:10:44 +0800
Subject: [PATCH 166/224] mtd: nand: mtk: Support different MTK NAND flash
controller IP
MT7622 uses an MTK's earlier NAND flash controller IP which support
different sector size, max spare size per sector and paraity bits...,
some register's offset and definition also been changed in the NAND
flash controller, this patch is the preparation to support MT7622
NAND flash controller.
MT7622 NFC and ECC engine are similar to MT2701's, except below
differences:
(1)MT7622 NFC's max sector size(ECC data size) is 512 bytes, and
MT2701's is 1024, and MT7622's max sector number is 8.
(2)The parity bit of MT7622 is 13, MT2701 is 14.
(3)MT7622 ECC supports less ECC strength, max to 16 bit ecc strength.
(4)MT7622 supports less spare size per sector, max spare size per
sector is 28 bytes.
(5)Some register's offset are different, include ECC_ENCIRQ_EN,
ECC_ENCIRQ_STA, ECC_DECDONE, ECC_DECIRQ_EN and ECC_DECIRQ_STA.
(6)ENC_MODE of ECC_ENCCNFG register is moved from bit 5-6 to bit 4-5.
Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/mtk_ecc.c | 100 ++++++++++++++++++++++++++++++--------------
drivers/mtd/nand/mtk_ecc.h | 3 +-
drivers/mtd/nand/mtk_nand.c | 27 ++++++++----
3 files changed, 89 insertions(+), 41 deletions(-)
--- a/drivers/mtd/nand/mtk_ecc.c
+++ b/drivers/mtd/nand/mtk_ecc.c
@@ -34,34 +34,28 @@
#define ECC_ENCCON (0x00)
#define ECC_ENCCNFG (0x04)
-#define ECC_MODE_SHIFT (5)
#define ECC_MS_SHIFT (16)
#define ECC_ENCDIADDR (0x08)
#define ECC_ENCIDLE (0x0C)
-#define ECC_ENCIRQ_EN (0x80)
-#define ECC_ENCIRQ_STA (0x84)
#define ECC_DECCON (0x100)
#define ECC_DECCNFG (0x104)
#define DEC_EMPTY_EN BIT(31)
#define DEC_CNFG_CORRECT (0x3 << 12)
#define ECC_DECIDLE (0x10C)
#define ECC_DECENUM0 (0x114)
-#define ECC_DECDONE (0x124)
-#define ECC_DECIRQ_EN (0x200)
-#define ECC_DECIRQ_STA (0x204)
#define ECC_TIMEOUT (500000)
#define ECC_IDLE_REG(op) ((op) == ECC_ENCODE ? ECC_ENCIDLE : ECC_DECIDLE)
#define ECC_CTL_REG(op) ((op) == ECC_ENCODE ? ECC_ENCCON : ECC_DECCON)
-#define ECC_IRQ_REG(op) ((op) == ECC_ENCODE ? \
- ECC_ENCIRQ_EN : ECC_DECIRQ_EN)
struct mtk_ecc_caps {
u32 err_mask;
const u8 *ecc_strength;
+ const u32 *ecc_regs;
u8 num_ecc_strength;
- u32 encode_parity_reg0;
+ u8 ecc_mode_shift;
+ u32 parity_bits;
int pg_irq_sel;
};
@@ -89,6 +83,33 @@ static const u8 ecc_strength_mt2712[] =
40, 44, 48, 52, 56, 60, 68, 72, 80
};
+enum mtk_ecc_regs {
+ ECC_ENCPAR00,
+ ECC_ENCIRQ_EN,
+ ECC_ENCIRQ_STA,
+ ECC_DECDONE,
+ ECC_DECIRQ_EN,
+ ECC_DECIRQ_STA,
+};
+
+static int mt2701_ecc_regs[] = {
+ [ECC_ENCPAR00] = 0x10,
+ [ECC_ENCIRQ_EN] = 0x80,
+ [ECC_ENCIRQ_STA] = 0x84,
+ [ECC_DECDONE] = 0x124,
+ [ECC_DECIRQ_EN] = 0x200,
+ [ECC_DECIRQ_STA] = 0x204,
+};
+
+static int mt2712_ecc_regs[] = {
+ [ECC_ENCPAR00] = 0x300,
+ [ECC_ENCIRQ_EN] = 0x80,
+ [ECC_ENCIRQ_STA] = 0x84,
+ [ECC_DECDONE] = 0x124,
+ [ECC_DECIRQ_EN] = 0x200,
+ [ECC_DECIRQ_STA] = 0x204,
+};
+
static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc,
enum mtk_ecc_operation op)
{
@@ -107,32 +128,30 @@ static inline void mtk_ecc_wait_idle(str
static irqreturn_t mtk_ecc_irq(int irq, void *id)
{
struct mtk_ecc *ecc = id;
- enum mtk_ecc_operation op;
u32 dec, enc;
- dec = readw(ecc->regs + ECC_DECIRQ_STA) & ECC_IRQ_EN;
+ dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA])
+ & ECC_IRQ_EN;
if (dec) {
- op = ECC_DECODE;
- dec = readw(ecc->regs + ECC_DECDONE);
+ dec = readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
if (dec & ecc->sectors) {
/*
* Clear decode IRQ status once again to ensure that
* there will be no extra IRQ.
*/
- readw(ecc->regs + ECC_DECIRQ_STA);
+ readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_STA]);
ecc->sectors = 0;
complete(&ecc->done);
} else {
return IRQ_HANDLED;
}
} else {
- enc = readl(ecc->regs + ECC_ENCIRQ_STA) & ECC_IRQ_EN;
- if (enc) {
- op = ECC_ENCODE;
+ enc = readl(ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_STA])
+ & ECC_IRQ_EN;
+ if (enc)
complete(&ecc->done);
- } else {
+ else
return IRQ_NONE;
- }
}
return IRQ_HANDLED;
@@ -160,7 +179,7 @@ static int mtk_ecc_config(struct mtk_ecc
/* configure ECC encoder (in bits) */
enc_sz = config->len << 3;
- reg = ecc_bit | (config->mode << ECC_MODE_SHIFT);
+ reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
reg |= (enc_sz << ECC_MS_SHIFT);
writel(reg, ecc->regs + ECC_ENCCNFG);
@@ -171,9 +190,9 @@ static int mtk_ecc_config(struct mtk_ecc
} else {
/* configure ECC decoder (in bits) */
dec_sz = (config->len << 3) +
- config->strength * ECC_PARITY_BITS;
+ config->strength * ecc->caps->parity_bits;
- reg = ecc_bit | (config->mode << ECC_MODE_SHIFT);
+ reg = ecc_bit | (config->mode << ecc->caps->ecc_mode_shift);
reg |= (dec_sz << ECC_MS_SHIFT) | DEC_CNFG_CORRECT;
reg |= DEC_EMPTY_EN;
writel(reg, ecc->regs + ECC_DECCNFG);
@@ -291,7 +310,12 @@ int mtk_ecc_enable(struct mtk_ecc *ecc,
*/
if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE)
reg_val |= ECC_PG_IRQ_SEL;
- writew(reg_val, ecc->regs + ECC_IRQ_REG(op));
+ if (op == ECC_ENCODE)
+ writew(reg_val, ecc->regs +
+ ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
+ else
+ writew(reg_val, ecc->regs +
+ ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
}
writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op));
@@ -310,13 +334,17 @@ void mtk_ecc_disable(struct mtk_ecc *ecc
/* disable it */
mtk_ecc_wait_idle(ecc, op);
- if (op == ECC_DECODE)
+ if (op == ECC_DECODE) {
/*
* Clear decode IRQ status in case there is a timeout to wait
* decode IRQ.
*/
- readw(ecc->regs + ECC_DECIRQ_STA);
- writew(0, ecc->regs + ECC_IRQ_REG(op));
+ readw(ecc->regs + ecc->caps->ecc_regs[ECC_DECDONE]);
+ writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_DECIRQ_EN]);
+ } else {
+ writew(0, ecc->regs + ecc->caps->ecc_regs[ECC_ENCIRQ_EN]);
+ }
+
writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));
mutex_unlock(&ecc->lock);
@@ -367,11 +395,11 @@ int mtk_ecc_encode(struct mtk_ecc *ecc,
mtk_ecc_wait_idle(ecc, ECC_ENCODE);
/* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */
- len = (config->strength * ECC_PARITY_BITS + 7) >> 3;
+ len = (config->strength * ecc->caps->parity_bits + 7) >> 3;
/* write the parity bytes generated by the ECC back to temp buffer */
__ioread32_copy(ecc->eccdata,
- ecc->regs + ecc->caps->encode_parity_reg0,
+ ecc->regs + ecc->caps->ecc_regs[ECC_ENCPAR00],
round_up(len, 4));
/* copy into possibly unaligned OOB region with actual length */
@@ -404,19 +432,29 @@ void mtk_ecc_adjust_strength(struct mtk_
}
EXPORT_SYMBOL(mtk_ecc_adjust_strength);
+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc)
+{
+ return ecc->caps->parity_bits;
+}
+EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
+
static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
.err_mask = 0x3f,
.ecc_strength = ecc_strength_mt2701,
+ .ecc_regs = mt2701_ecc_regs,
.num_ecc_strength = 20,
- .encode_parity_reg0 = 0x10,
+ .ecc_mode_shift = 5,
+ .parity_bits = 14,
.pg_irq_sel = 0,
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
.err_mask = 0x7f,
.ecc_strength = ecc_strength_mt2712,
+ .ecc_regs = mt2712_ecc_regs,
.num_ecc_strength = 23,
- .encode_parity_reg0 = 0x300,
+ .ecc_mode_shift = 5,
+ .parity_bits = 14,
.pg_irq_sel = 1,
};
@@ -452,7 +490,7 @@ static int mtk_ecc_probe(struct platform
max_eccdata_size = ecc->caps->num_ecc_strength - 1;
max_eccdata_size = ecc->caps->ecc_strength[max_eccdata_size];
- max_eccdata_size = (max_eccdata_size * ECC_PARITY_BITS + 7) >> 3;
+ max_eccdata_size = (max_eccdata_size * ecc->caps->parity_bits + 7) >> 3;
max_eccdata_size = round_up(max_eccdata_size, 4);
ecc->eccdata = devm_kzalloc(dev, max_eccdata_size, GFP_KERNEL);
if (!ecc->eccdata)
--- a/drivers/mtd/nand/mtk_ecc.h
+++ b/drivers/mtd/nand/mtk_ecc.h
@@ -14,8 +14,6 @@
#include <linux/types.h>
-#define ECC_PARITY_BITS (14)
-
enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1};
enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE};
@@ -43,6 +41,7 @@ int mtk_ecc_wait_done(struct mtk_ecc *,
int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
void mtk_ecc_disable(struct mtk_ecc *);
void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc);
struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
void mtk_ecc_release(struct mtk_ecc *);
--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -97,7 +97,6 @@
#define MTK_TIMEOUT (500000)
#define MTK_RESET_TIMEOUT (1000000)
-#define MTK_MAX_SECTOR (16)
#define MTK_NAND_MAX_NSELS (2)
#define MTK_NFC_MIN_SPARE (16)
#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \
@@ -109,6 +108,8 @@ struct mtk_nfc_caps {
u8 num_spare_size;
u8 pageformat_spare_shift;
u8 nfi_clk_div;
+ u8 max_sector;
+ u32 max_sector_size;
};
struct mtk_nfc_bad_mark_ctl {
@@ -450,7 +451,7 @@ static inline u8 mtk_nfc_read_byte(struc
* set to max sector to allow the HW to continue reading over
* unaligned accesses
*/
- reg = (MTK_MAX_SECTOR << CON_SEC_SHIFT) | CON_BRD;
+ reg = (nfc->caps->max_sector << CON_SEC_SHIFT) | CON_BRD;
nfi_writel(nfc, reg, NFI_CON);
/* trigger to fetch data */
@@ -481,7 +482,7 @@ static void mtk_nfc_write_byte(struct mt
reg = nfi_readw(nfc, NFI_CNFG) | CNFG_BYTE_RW;
nfi_writew(nfc, reg, NFI_CNFG);
- reg = MTK_MAX_SECTOR << CON_SEC_SHIFT | CON_BWR;
+ reg = nfc->caps->max_sector << CON_SEC_SHIFT | CON_BWR;
nfi_writel(nfc, reg, NFI_CON);
nfi_writew(nfc, STAR_EN, NFI_STRDATA);
@@ -1126,9 +1127,11 @@ static void mtk_nfc_set_fdm(struct mtk_n
{
struct nand_chip *nand = mtd_to_nand(mtd);
struct mtk_nfc_nand_chip *chip = to_mtk_nand(nand);
+ struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 ecc_bytes;
- ecc_bytes = DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8);
+ ecc_bytes = DIV_ROUND_UP(nand->ecc.strength *
+ mtk_ecc_get_parity_bits(nfc->ecc), 8);
fdm->reg_size = chip->spare_per_sector - ecc_bytes;
if (fdm->reg_size > NFI_FDM_MAX_SIZE)
@@ -1208,7 +1211,8 @@ static int mtk_nfc_ecc_init(struct devic
* this controller only supports 512 and 1024 sizes
*/
if (nand->ecc.size < 1024) {
- if (mtd->writesize > 512) {
+ if (mtd->writesize > 512 &&
+ nfc->caps->max_sector_size > 512) {
nand->ecc.size = 1024;
nand->ecc.strength <<= 1;
} else {
@@ -1223,7 +1227,8 @@ static int mtk_nfc_ecc_init(struct devic
return ret;
/* calculate oob bytes except ecc parity data */
- free = ((nand->ecc.strength * ECC_PARITY_BITS) + 7) >> 3;
+ free = (nand->ecc.strength * mtk_ecc_get_parity_bits(nfc->ecc)
+ + 7) >> 3;
free = spare - free;
/*
@@ -1233,10 +1238,12 @@ static int mtk_nfc_ecc_init(struct devic
*/
if (free > NFI_FDM_MAX_SIZE) {
spare -= NFI_FDM_MAX_SIZE;
- nand->ecc.strength = (spare << 3) / ECC_PARITY_BITS;
+ nand->ecc.strength = (spare << 3) /
+ mtk_ecc_get_parity_bits(nfc->ecc);
} else if (free < 0) {
spare -= NFI_FDM_MIN_SIZE;
- nand->ecc.strength = (spare << 3) / ECC_PARITY_BITS;
+ nand->ecc.strength = (spare << 3) /
+ mtk_ecc_get_parity_bits(nfc->ecc);
}
}
@@ -1389,6 +1396,8 @@ static const struct mtk_nfc_caps mtk_nfc
.num_spare_size = 16,
.pageformat_spare_shift = 4,
.nfi_clk_div = 1,
+ .max_sector = 16,
+ .max_sector_size = 1024,
};
static const struct mtk_nfc_caps mtk_nfc_caps_mt2712 = {
@@ -1396,6 +1405,8 @@ static const struct mtk_nfc_caps mtk_nfc
.num_spare_size = 19,
.pageformat_spare_shift = 16,
.nfi_clk_div = 2,
+ .max_sector = 16,
+ .max_sector_size = 1024,
};
static const struct of_device_id mtk_nfc_id_table[] = {
Reference in New Issue View Git Blame Copy Permalink