252197f014
Devices with PCIe-Switches like the WNDR4700, MR24 and WNDAP660 need to have the interrupts property specified in the device-tree for the legacy pci interrupt signaling method to work. If the proper interrupt value is not specified, the default INTA IRQ 12 is taken for all devices. This is especially bad, if the device is setup to use INTC, because these interrupts will not be serviced. Russell Senior reported his experience on the MR24: "The symptom is client devices can't see the beacons. Wifi ifaces appear, can scan and hear other networks, but clients can't see the MR24's SSIDs." (The interrupts-property on the WNDAP620 was optional since it uses INTA by default. Likewise the MX60W is in the same category) Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
89 lines
1.7 KiB
Plaintext
89 lines
1.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/dts-v1/;
|
|
|
|
#include "netgear-wndap6x0.dtsi"
|
|
|
|
/ {
|
|
model = "Netgear WNDAP660";
|
|
compatible = "netgear,wndap660", "apm,bluestone";
|
|
};
|
|
|
|
&LEDS {
|
|
lan1-link1000 {
|
|
label = "wndap660:green:lan1-link1000";
|
|
gpios = <&GPIO0 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
lan1-link100 {
|
|
label = "wndap660:amber:lan1-link100";
|
|
gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
lan2-link1000 {
|
|
label = "wndap660:green:lan2-link1000";
|
|
gpios = <&GPIO0 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
lan2-link100 {
|
|
label = "wndap660:amber:lan2-link100";
|
|
gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&PCIE0 {
|
|
/*
|
|
* relevant lspci topology:
|
|
*
|
|
* -+-[0000:40]---00.0-[41-7f]----00.0-[42-45]--+-02.0-[43]----00.0
|
|
* +-03.0-[44]----00.0
|
|
*
|
|
*/
|
|
|
|
bridge@64,0 {
|
|
reg = <0x00400000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
bridge@65,0 {
|
|
/* IDT PES3T3 PCI Express Switch */
|
|
compatible = "pci111d,8039";
|
|
reg = <0x00410000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
bridge@66,2 {
|
|
compatible = "pci111d,8039";
|
|
reg = <0x00421000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi0: wifi@67,0 {
|
|
/* Atheros AR9380 2.4/5GHz */
|
|
compatible = "pci168c,0030";
|
|
reg = <0x00430000 0 0 0 0>;
|
|
interrupts = <3>; /* INTC */
|
|
};
|
|
};
|
|
|
|
bridge@66,3 {
|
|
compatible = "pci111d,8039";
|
|
reg = <0x00421800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi1: wifi@68,0 {
|
|
/* Atheros AR9380 2.4/5GHz */
|
|
compatible = "pci168c,0030";
|
|
reg = <0x00440000 0 0 0 0>;
|
|
interrupts = <4>; /* INTD */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|