Openwrt build for Asrock G10 Router
Go to file
Adrian Schmutzler ad6b077049 ramips: mt7628: move mtd-eeprom out of root DTSI
The mt76x8 subtarget is the only one in ramips that stores the
mediatek,mtd-eeprom property directly in the "root" mt7628an.dtsi.

This is not optimal for a few different reasons:

 * If you don't really know it or are used to other (sub)targets,
   the property will be set somewhat magically.
 * The property is set based on &factory partition before (if at all)
   this partition is defined.
 * There are several devices that have different offset or even
   different partitions to read from, which will then be overwritten
   in the DTS files. Thus, definitions are scattered between root
   DTSI and individual files.

Based on these circumstances, the "root" definition is removed and
the property is added to the device-based DTS(I) files where needed
and applicable. This should be easier to grasp for unexperienced
developers and will move the property closer to the partition
definitions.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-08-17 18:41:17 +02:00
.github
config build: create profiles.json per default 2021-06-21 08:12:21 -10:00
include kernel: bump 5.10 to 5.10.59 2021-08-16 20:37:33 +01:00
LICENSES
package base-files: rename 'sdcard' to 'legacy-sdcard' 2021-08-16 12:22:17 +01:00
scripts base-files: rename 'sdcard' to 'legacy-sdcard' 2021-08-16 12:22:17 +01:00
target ramips: mt7628: move mtd-eeprom out of root DTSI 2021-08-17 18:41:17 +02:00
toolchain toolchain/gcc: bump gcc 11 to 11.2 2021-08-08 19:50:46 +02:00
tools firmware-utils: nand_ecc: replace GPL boilerplate with SPDX 2021-08-09 16:08:59 +02:00
.gitattributes
.gitignore .gitignore: ignore any .vscode* file 2021-07-02 09:50:12 -10:00
BSDmakefile
Config.in
COPYING
feeds.conf.default
Makefile
README.md
rules.mk

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0