146eb4925c
MeshPoint.One is Wi-Fi hotspot and smart IoT gateway (based upon Jalapeno module from 8Devices). MeshPoint.One (https://meshpointone.com) is a unique Wi-Fi hotspot and smart city gateway that can be installed and powered from street lighting (even solar power in the future). MeshPoint provides up to 27 hours of interrupted Wi-Fi and IoT services from internal battery even when external power is not available. MeshPoint.One can be used for disaster relief efforts in order to provide instant Wi-Fi coverage that can be easily expanded by just adding more devices that create wide area mesh network. MeshPoint.One devices have standard Luci UI for management. Features: - 1x 1Gpbs WAN - 1x 1Gbps LAN - POE input (eth0) - POE output (eth1) - Sensor for temperature, humidity and pressure (Bosch BME280) - current, voltage and power measurement via TI INA230 - Hardware real time clock - optional power via Li-Ion battery - micro USB port with USB to serial chip for easy OpenWrt terminal access - I2C header for connecting additional sensors Installation: ------------- Simply flash the sysupgrade image from stock firmware. Or use the built in Web recovery into bootloader: Hold Reset button for 5 to 20 seconds or use UART and httpd command. Web UI will appear on 192.168.2.100 by default. For web recovery use the factory.ubi image. Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr> Signed-off-by: Damir Franusic <damir.franusic@sartura.hr> Signed-off-by: Valent Turkovic <valent@meshpoint.me> Signed-off-by: Robert Marko <robert@meshpoint.me> [commit description long line wrap, usb->USB] Signed-off-by: Petr Štetiar <ynezz@true.cz>
82 lines
1.4 KiB
Plaintext
82 lines
1.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
|
|
* Author: Robert Marko <robert@meshpoint.me>
|
|
*/
|
|
|
|
#include "qcom-ipq4018-jalapeno.dtsi"
|
|
|
|
/ {
|
|
model = "Crisis Innovation Lab MeshPoint.One";
|
|
compatible = "cilab,meshpoint-one";
|
|
|
|
aliases {
|
|
led-boot = &led_status;
|
|
led-failsafe = &led_status;
|
|
led-running = &led_status;
|
|
led-upgrade = &led_status;
|
|
};
|
|
|
|
soc {
|
|
i2c-gpio {
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "i2c-gpio";
|
|
gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
|
|
&tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
|
|
>;
|
|
|
|
bme280@76 {
|
|
status = "okay";
|
|
|
|
compatible = "bosch,bme280";
|
|
reg = <0x76>;
|
|
};
|
|
|
|
pcf2129@51 {
|
|
status = "okay";
|
|
|
|
compatible = "nxp,pcf2129";
|
|
reg = <0x51>;
|
|
};
|
|
|
|
ina230@40 {
|
|
status = "okay";
|
|
|
|
compatible = "ti,ina230";
|
|
reg = <0x40>;
|
|
shunt-resistor = <2000>;
|
|
};
|
|
|
|
ina230@44 {
|
|
status = "okay";
|
|
|
|
compatible = "ti,ina230";
|
|
reg = <0x44>;
|
|
shunt-resistor = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART >;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_status: status {
|
|
label = "meshpoint-one:blue:status";
|
|
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|