Openwrt build for Asrock G10 Router
Go to file
Thomas Equeter acedce1d79 uqmi: wait for the control device too
The control device /dev/cdc-wdm0 is not available immediately on the
D-Link DWR-921 Rev.C3, therefore the wwan interface fails to start at
boot with a "The specified control device does not exist" error.

This patch alters /lib/netifd/proto/qmi.sh to wait for
network.wwan.delay earlier, before checking for the control device,
instead of just before interacting with the modem.

One still has to use network.wwan.proto='qmi', as the "wwan" proto
performs that sort of check before any delay is possible, failing with a
"No valid device was found" error.

Signed-off-by: Thomas Equeter <tequeter@users.noreply.github.com>
2018-08-29 13:10:12 +02:00
.github
config x86: add support to set GRUB menu entry title 2018-07-30 15:55:21 +02:00
include kernel: bump 4.14 to 4.14.67 2018-08-28 23:05:39 +02:00
package uqmi: wait for the control device too 2018-08-29 13:10:12 +02:00
scripts build: add mkrasimage 2018-08-28 11:26:53 +02:00
target apm821xx: MBL: load kernel/dtb from SATA 0:1 first 2018-08-29 09:43:10 +02:00
toolchain toolchain/gcc: update 8.x to 8.2.0 2018-08-20 09:24:33 +02:00
tools build: add mkrasimage 2018-08-28 11:26:53 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile build: Unset CDPATH to avoid problems 2018-08-25 11:10:28 +02:00
README build: README punctuation pendantry 2018-07-08 12:05:16 +01:00
rules.mk toolchain/gcc: add config symbol to determine how to apply path remapping 2018-08-20 09:24:29 +02:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org