Openwrt

Openwrt build for Asrock G10 Router

Go to file

Nicolas Thill aa8e2e8685 netfilter: extension fixes (partially closes: #7045 ) * add missing xt_owner (2.6) * enable ipt_quota (2.4), disabled in [8499] is building fine with recent iptables * add missing ipt_nat_tftp (2.4) * add missing nf_nat_amanda (2.6) SVN-Revision: 20693		2010-04-04 12:35:06 +00:00
docs
include	netfilter: extension fixes (partially closes: #7045 ) * add missing xt_owner (2.6) * enable ipt_quota (2.4), disabled in [8499] is building fine with recent iptables * add missing ipt_nat_tftp (2.4) * add missing nf_nat_amanda (2.6)	2010-04-04 12:35:06 +00:00
package	cyassl: shouldn't depend on zlib when compiled with --without-zlib	2010-04-04 11:16:46 +00:00
scripts	rework board detection	2010-03-18 23:35:21 +00:00
target	ar71xx: fix broken LAN ports on the boards with AR8216 switch (closes #7024 )	2010-04-03 13:59:08 +00:00
toolchain	toolchain/binutils: building gas for arm-*-uclibc systems requires linking with -lm	2010-03-30 08:01:35 +00:00
tools	flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.	2010-04-01 21:20:43 +00:00
.gitignore
BSDmakefile
Config.in	select LZMA compressed initramfs by default for ramips	2010-03-31 09:58:29 +00:00
feeds.conf.default
LICENSE
Makefile
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
rules.mk	fix path to libgcc.a in LIBGCC_S	2010-03-30 04:04:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org