Openwrt/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
Gabor Juhos a6a8cb6a55 fix mac address setup on RouterBOARDs
SVN-Revision: 9713
2007-12-12 08:43:41 +00:00

139 lines
3.3 KiB
C

/*
* $Id$
*
* Mikrotik's RouterBOOT definitions
*
* Copyright (C) 2007 OpenWrt.org
* Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifndef _ROUTERBOOT_H
#define _ROUTERBOOT_H
#define RB_MAC_SIZE 6
struct rb_bios_settings {
u32 hs_offs; /* hard settings offset */
u32 hs_size; /* hard settings size */
u32 fw_offs; /* firmware offset */
u32 ss_offs; /* soft settings offset */
u32 ss_size; /* soft settings size */
};
struct rb_hard_settings {
char *name; /* board name */
char *bios_ver; /* BIOS version */
u32 mem_size; /* memory size in bytes */
u32 mac_count; /* number of mac addresses */
u8 *mac_base; /* mac address base */
};
/*
* Magic numbers
*/
#define RB_MAGIC_HARD 0x64726148 /* "Hard" */
#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
#define RB_ID_TERMINATOR 0
/*
* ID values for Hardware settings
*/
#define RB_ID_HARD_01 1
#define RB_ID_HARD_02 2
#define RB_ID_FLASH_INFO 3
#define RB_ID_MAC_ADDRESS_PACK 4
#define RB_ID_BOARD_NAME 5
#define RB_ID_BIOS_VERSION 6
#define RB_ID_HARD_07 7
#define RB_ID_SDRAM_TIMINGS 8
#define RB_ID_DEVICE_TIMINGS 9
#define RB_ID_SOFTWARE_ID 10
#define RB_ID_SERIAL_NUMBER 11
#define RB_ID_HARD_12 12
#define RB_ID_MEMORY_SIZE 13
#define RB_ID_MAC_ADDRESS_COUNT 14
/*
* ID values for Software settings
*/
#define RB_ID_UART_SPEED 1
#define RB_ID_BOOT_DELAY 2
#define RB_ID_BOOT_DEVICE 3
#define RB_ID_BOOT_KEY 4
#define RB_ID_CPU_MODE 5
#define RB_ID_FW_VERSION 6
#define RB_ID_SOFT_07 7
#define RB_ID_SOFT_08 8
#define RB_ID_BOOT_PROTOCOL 9
#define RB_ID_SOFT_10 10
#define RB_ID_SOFT_11 11
/*
* UART_SPEED values
*/
#define RB_UART_SPEED_115200 0
#define RB_UART_SPEED_57600 1
#define RB_UART_SPEED_38400 2
#define RB_UART_SPEED_19200 3
#define RB_UART_SPEED_9600 4
#define RB_UART_SPEED_4800 5
#define RB_UART_SPEED_2400 6
#define RB_UART_SPEED_1200 7
/*
* BOOT_DELAY values
*/
#define RB_BOOT_DELAY_0SEC 0
#define RB_BOOT_DELAY_1SEC 1
#define RB_BOOT_DELAY_2SEC 2
/*
* BOOT_DEVICE values
*/
#define RB_BOOT_DEVICE_ETHER 0
#define RB_BOOT_DEVICE_NANDETH 1
#define RB_BOOT_DEVICE_ETHONCE 2
#define RB_BOOT_DEVICE_NANDONLY 3
/*
* BOOT_KEY values
*/
#define RB_BOOT_KEY_ANY 0
#define RB_BOOT_KEY_DEL 1
/*
* CPU_MODE values
*/
#define RB_CPU_MODE_POWERSAVE 0
#define RB_CPU_MODE_REGULAR 1
/*
* BOOT_PROTOCOL values
*/
#define RB_BOOT_PROTOCOL_BOOTP 0
#define RB_BOOT_PROTOCOL_DHCP 1
extern int routerboot_present(void) __init;
extern char *routerboot_get_boardname(void);
extern struct rb_hard_settings rb_hs;
#endif /* _ROUTERBOOT_H */