Sungbo Eo a4e9c8f14b ramips: add support for netis WF2770 ... netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>		2020-05-17 18:41:48 +02:00
..
apm821xx
ar71xx	ar71xx: mikrotik: mach-rbspi.c remove wlan id	2020-05-12 12:41:12 +02:00
arc770
archs38
armvirt
at91
ath25
ath79	ath79: increase spi frequency on tp-link tl-wr1043nd v2	2020-05-15 10:00:32 +08:00
bcm27xx	bcm27xx: drop outdated kernel version switches from patches-5.4	2020-05-17 18:36:10 +02:00
bcm47xx	kernel: bump 4.19 to 4.19.122	2020-05-12 12:36:28 +02:00
bcm53xx
bcm63xx	bcm63xx: periph_intc: report effective affinity	2020-05-14 18:10:12 +02:00
cns3xxx
gemini
generic	generic: drop outdated kernel version switches in local drivers	2020-05-17 18:35:59 +02:00
imx6
ipq40xx	ipq40xx: replace "ok" with "okay" for status in DTS files	2020-05-12 19:16:41 +02:00
ipq806x
ipq807x
kirkwood
lantiq	lantiq: drop outdated kernel version switches from patches-5.4	2020-05-17 18:36:21 +02:00
layerscape	kernel: bump 5.4 to 5.4.40	2020-05-12 12:36:28 +02:00
malta
mediatek
mpc85xx
mvebu	mvebu: uDPU: switch default kernel and U-Boot PHY mode	2020-05-09 14:34:23 +02:00
mxs
octeon
octeontx
omap
oxnas
pistachio
ramips	ramips: add support for netis WF2770	2020-05-17 18:41:48 +02:00
rb532
rockchip
samsung
sunxi
tegra
uml
x86
zynq
Makefile