Openwrt build for Asrock G10 Router
Go to file
Sungbo Eo a4260eaab7 ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300
The current ethernet MAC address setup of TL-WDR4300 board is different
from the setup of stock firmware:

OpenWrt: lan = label_mac -2, wan = label_mac -2
  stock: lan = label_mac,    wan = label_mac +1

The full address assignment is as follows:
LAN  label
WAN  label + 1
5G   label
2G   label - 1

This patch changes all devices using TL-WDR4300 board:
TL-WDR3600 v1 (checked on device)
TL-WDR4300 v1 (checked on device)
TL-WDR4300 v1 (IL)

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rephrase/extend commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-21 00:27:39 +01:00
.github
config config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL 2019-11-28 02:02:17 +02:00
include build: image: add SOC device variable 2019-12-20 01:07:25 +01:00
package ipq-wifi: add BDF for Aruba AP-303 2019-12-20 17:48:52 +01:00
scripts scripts/dl_github_archive.py: fix python3 str, bytes confusion 2019-11-04 11:11:19 +00:00
target ath79: fix MAC address setup for TP-Link TL-WDR3600/TL-WDR4300 2019-12-21 00:27:39 +01:00
toolchain glibc: update to latest 2.27 commit (BZ #2503, BZ #2504) 2019-12-11 22:31:54 +01:00
tools tools: tplink-safeloader: fix whitespace issues 2019-11-27 22:54:36 +01:00
.gitattributes
.gitignore gitignore: ignore patches in OpenWrt root directory 2019-11-06 00:27:55 +01:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile build: add buildinfo as single Makefile target 2019-10-17 14:01:33 +02:00
README build: switch to Python 3 2019-07-26 08:09:16 +02:00
rules.mk rules.mk: remove "$(STAGING_DIR)/include" 2019-11-02 20:51:56 +01:00

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org