Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau a366b4ea98 use . /var/state/network instead of config_load to avoid a CONFIG_SECTIONS reset SVN-Revision: 7953		2007-07-13 00:44:41 +00:00
docs	fix docs compile targets	2007-07-10 16:38:05 +00:00
include	bump to 2.6.22.1	2007-07-11 10:57:49 +00:00
package	use . /var/state/network instead of config_load to avoid a CONFIG_SECTIONS reset	2007-07-13 00:44:41 +00:00
scripts	arm-magic.sh: Added support for fsg3	2007-07-11 14:07:28 +00:00
target	fix layer7 for 2.6.21	2007-07-12 21:34:20 +00:00
toolchain	fix cflags for xscale (#2026 )	2007-07-11 05:18:19 +00:00
tools	Remove patch-cmdline from the packages and move it tools tools/. adm5120 and rb532 do use it for procuding ready-to-use kernels (#1631 )	2007-07-01 09:45:27 +00:00
.gitignore	make top-level .gitignore only apply to top-level files/directories (#1960 )	2007-06-25 10:54:32 +00:00
BSDmakefile
Config.in
LICENSE
Makefile	fix distclean	2007-07-12 10:55:00 +00:00
README
rules.mk	don't include .config if DUMP is set	2007-06-26 20:24:55 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org