Henryk Heisig 14951e8f8e ramips: add support for TP-Link Archer C50 v3 ... TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>		2018-02-11 16:04:16 +01:00
..
3G150B.dts
3G300M.dts
3G-6200N.dts
3G-6200NL.dts
11ACNAS.dts
A5-V11.dts
AC1200RM.dts	ramips: add support for ALFA Network AC1200RM	2018-01-15 00:12:13 +01:00
AI-BR100.dts
AIR3GII.dts
ALL0239-3G.dts
ALL0256N-4M.dts
ALL0256N-8M.dts
ALL0256N.dtsi
ALL5002.dts
ALL5003.dts
AR670W.dts
AR725W.dts
ArcherC20i.dts
ArcherC20v1.dts	ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1	2018-01-15 21:45:43 +01:00
ArcherC20v4.dts	ramips: ArcherC20v4: use common TP-Link dtsi file	2018-02-11 16:04:16 +01:00
ArcherC50.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
ArcherC50V3.dts	ramips: add support for TP-Link Archer C50 v3	2018-02-11 16:04:16 +01:00
ArcherMR200.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
ASL26555-8M.dts
ASL26555-16M.dts
ASL26555.dtsi
ATP-52B.dts
AWAPN2403.dts
AWM002-EVB-4M.dts
AWM002-EVB-8M.dts
AWM002-EVB.dtsi
BC2.dts
BR-6475ND.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
BROADWAY.dts
C108.dts
CARAMBOLA.dts
CF-WR800N.dts
CS-QR10.dts
CY-SWR1100.dts
D105.dts
D240.dts
DAP-1350.dts
DB-WRT01.dts
DCH-M225.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
DCS-930.dts
DCS-930L-B1.dts
DIR-300-B1.dts
DIR-300-B7.dts
DIR-320-B1.dts
DIR-600-B1.dts
DIR-610-A1.dts
DIR-615-D.dts
DIR-615-H1.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
DIR-620-A1.dts
DIR-620-D1.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
DIR-645.dts
DIR-810L.dts
DIR-860L-B1.dts
DUZUN-DM06.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
DWR-512-B.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
E1700.dts
ESR-9753.dts
EW1200.dts
EX2700.dts
EX3700.dts
F5D8235_V1.dts
F5D8235_V2.dts
F7C027.dts
FIREWRT.dts
FONERA20N.dts
FREESTATION5.dts
GB-PC1.dts	ramips: Fix GB-PC1 cpuclock again	2018-01-24 07:33:42 +01:00
GL-MT300A.dts
GL-MT300N-V2.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
GL-MT300N.dts
GL-MT750.dts
HC5X61.dtsi	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
HC5661.dts
HC5661A.dts
HC5761.dts
HC5861.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
HC5962.dts
HG255D.dts
HLKRM04.dts
HPM.dts
HT-TM02.dts
HW550-3G.dts
IP2202.dts
JHR-N805R.dts
JHR-N825R.dts
JHR-N926R.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
K2P.dts
kn_rc.dts
kn_rf.dts
kn.dts
kng_rc.dts
LINKIT7688.dts	ramips: fix Linkit smart 7688 support	2017-12-23 15:35:52 +01:00
M2M.dts
M3.dts
M4-4M.dts
M4-8M.dts
M4.dtsi
MAC1200RV2.dts
MicroWRT.dts
MINIEMBPLUG.dts
MINIEMBWIFI.dts
MIR3G.dts
MIWIFI-MINI.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
MIWIFI-NANO.dts
MLW221.dts
MLWG2.dts
MOFI3500-3GN.dts
MPRA1.dts
MPRA2.dts
MR-102N.dts
mt7620a.dtsi	ramips: add missing pinmuxes to SoC dtsi	2017-11-22 08:21:52 +01:00
mt7620n.dtsi	ramips: add missing pinmuxes to SoC dtsi	2017-11-22 08:21:52 +01:00
mt7621.dtsi
mt7628an.dtsi	ramips: add missing pinmuxes to SoC dtsi	2017-11-22 08:21:52 +01:00
MT7620a_MT7530.dts
MT7620a_MT7610e.dts
MT7620a_V22SG.dts
MT7620a.dts
MT7621.dts
MT7628.dts
MZK-750DHP.dts
MZK-DP150N.dts
MZK-EX300NP.dts
MZK-EX750NP.dts
MZK-W300NH2.dts
MZK-WDPR.dts
NA930.dts
NBG-419N2.dts
NBG-419N.dts
NCS601W.dts
Newifi-D1.dts
Newifi-D2.dts	ramips: add support for newifi d2	2017-12-21 01:05:16 +01:00
NIXCORE-8M.dts
NIXCORE-16M.dts
NIXCORE.dtsi
NW718.dts
OMEGA2.dts	ramips: fix Omega2 compatible string	2017-12-29 22:32:34 +01:00
OMEGA2.dtsi	ramips: fix Omega2 compatible string	2017-12-29 22:32:34 +01:00
OMEGA2P.dts	ramips: fix Omega2 compatible string	2017-12-29 22:32:34 +01:00
OY-0001.dts
PBR-D1.dts	ramips: fix devicetree compat strings	2017-12-21 01:05:16 +01:00
PBR-M1.dts	ramips: fix devicetree compat strings	2017-12-21 01:05:16 +01:00
PSG1208.dts
PSG1218.dtsi
PSG1218A.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
PSG1218B.dts
PSR-680W.dts
PWH2004.dts
PX-4885-4M.dts
PX-4885-8M.dts
PX-4885.dtsi
R6220.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
RB750Gr3.dts
RE350.dts
RE6500.dts
RP-N53.dts
rt2880.dtsi
rt3050.dtsi	ramips: add missing pinmuxes to SoC dtsi	2017-11-22 08:21:52 +01:00
rt3352.dtsi	ramips: add missing pinmuxes to SoC dtsi	2017-11-22 08:21:52 +01:00
rt3883.dtsi
rt5350.dtsi
RT5350F-OLINUXINO-EVB.dts
RT5350F-OLINUXINO.dts
RT5350F-OLINUXINO.dtsi
RT-AC51U.dts
RT-G32-B1.dts
RT-N10-PLUS.dts
RT-N12-PLUS.dts	ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1	2017-12-06 17:51:31 +01:00
RT-N13U.dts
RT-N14U.dts
RT-N15.dts
RT-N56U.dts
RUT5XX.dts
SAP-G3200U3.dts
SK-WB8.dts
SL-R7205.dts
TEW-638APB-V2.dts
TEW-691GR.dts
TEW-692GR.dts
TEW-714TRU.dts
Timecloud.dts
TINY-AC.dts
TL-MR3420V5.dts	ramips: change the TP-Link dtsi filename	2018-02-11 16:04:16 +01:00
TL-WR840NV4.dts	ramips: change the TP-Link dtsi filename	2018-02-11 16:04:16 +01:00
TL-WR840NV5.dts	ramips: tl-wr840n-v5: increase firmware partition for 4Mmtk layot	2018-01-18 08:04:18 +01:00
TL-WR841NV13.dts	ramips: change the TP-Link dtsi filename	2018-02-11 16:04:16 +01:00
TPLINK-8M.dtsi	ramips: change the TP-Link dtsi filename	2018-02-11 16:04:16 +01:00
U25AWF-H1.dts
U7621-06-256M-16M.dts	ramips: add support for UniElec U7621-06	2017-11-14 22:36:46 +01:00
U7621-06.dtsi	ramips: add support for UniElec U7621-06	2017-11-14 22:36:46 +01:00
U7628-01-128M-16M.dts	ramips: add support for UniElec U7628-01	2017-11-14 22:36:46 +01:00
U7628-01.dtsi	ramips: backport MT7628 pinmux fixes	2017-11-22 08:21:52 +01:00
UBNT-ER-e50.dtsi	ramips: add missing soc compatibles to dts	2018-01-09 22:05:46 +01:00
UBNT-ERX-SFP.dts	ramips: add missing soc compatibles to dts	2018-01-09 22:05:46 +01:00
UBNT-ERX.dts
UR-326N4G.dts
UR-336UN.dts
V11STFE.dts
V22RW-2X2.dts
VAR11N-300.dts	ramips: add support for Vonets VAR11N-300	2017-12-21 01:05:16 +01:00
VOCORE2.dts
VOCORE2.dtsi	ramips: backport MT7628 pinmux fixes	2017-11-22 08:21:52 +01:00
VOCORE2LITE.dts
VOCORE-8M.dts
VOCORE-16M.dts
VOCORE.dtsi
VR500.dts
W150M.dts
W306R_V20.dts
W502U.dts
W2914NSV2.dts
W2914NSV2.dtsi
WCR150GN.dts
WCR-1166DS.dts
WE1026-5G-16M.dts
WE1026-5G.dtsi
WF-2881.dts
WHR-300HP2.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
WHR-600D.dts
WHR-1166D.dts
WHR-G300N.dts
WIDORA-NEO-16M.dts	ramips: add flash size postfix to Widora neo	2018-01-23 23:31:09 +01:00
WIDORA-NEO-32M.dts	ramips: add support for Widora Neo 32MB flash revision	2018-01-23 23:31:09 +01:00
WIDORA-NEO.dtsi	ramips: add flash size postfix to Widora neo	2018-01-23 23:31:09 +01:00
WITI.dts
WIZARD8800.dts
WIZFI630A.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
WL-330N3G.dts
WL-330N.dts
WL-341V3.dts
WL-351.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
WL-WN575A3.dts
WLI-TX4-AG300N.dts
WLR-6000.dts
WMDR-143N.dts
WMR-300.dts
WN3000RPV3.dts
WNCE2001.dts
WNDR3700V5.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
WR512-3GN-4M.dts
WR512-3GN-8M.dts
WR512-3GN.dtsi
WR6202.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
WRH-300CR.dts
WRTNODE2.dtsi
WRTNODE2P.dts
WRTNODE2R.dts
WRTNODE.dts
WSR-600.dts
WSR-1166.dts
WT1520-4M.dts
WT1520-8M.dts
WT1520.dtsi	ramips: add missing reset button for Nexx WT1520	2017-11-28 20:59:02 +01:00
WT3020-4M.dts
WT3020-8M.dts
WT3020.dtsi
WZR-AGL300NH.dts
X5.dts	ramips: fix polarity in gpio-export node	2017-12-18 09:32:27 +01:00
X8.dts
XDXRN502J.dts
Y1.dts	ramips: fix devicetree compat strings	2017-12-21 01:05:16 +01:00
Y1.dtsi	ramips: fix devicetree compat strings	2017-12-21 01:05:16 +01:00
Y1S.dts	ramips: fix devicetree compat strings	2017-12-21 01:05:16 +01:00
YOUKU-YK1.dts
ZBT-APE522II.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
ZBT-CPE102.dts
ZBT-WA05.dts
ZBT-WE826-16M.dts
ZBT-WE826-32M.dts
ZBT-WE826.dtsi
ZBT-WE1226.dts	ramips: various fixes for zbt-we1226	2018-02-06 03:00:33 +01:00
ZBT-WE1326.dts
ZBT-WE2026.dts
ZBT-WE3526.dts	ramips: add support for ZBT WE3526	2017-11-16 12:52:55 +01:00
ZBT-WG2626.dts
ZBT-WG3526-16M.dts
ZBT-WG3526-32M.dts
ZBT-WG3526.dtsi
ZBT-WR8305RT.dts	ramips: use pinmux nodes from dtsi	2017-11-22 08:21:53 +01:00
ZTE-Q7.dts