Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau a3349d3795 mac80211: disable b43 lp-phy support for now SVN-Revision: 17336		2009-08-20 16:56:36 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	merge the control file and the .ipk file targets into one to prevent them from going out of sync	2009-08-20 15:48:41 +00:00
package	mac80211: disable b43 lp-phy support for now	2009-08-20 16:56:36 +00:00
scripts	powerpc: Create a powerpc64 config feature	2009-08-18 23:07:45 +00:00
target	ps3/petitboot: Run petitboot at first startup	2009-08-19 22:36:53 +00:00
toolchain	pxcab: Replace TARGET_pxcab with feature powerpc64	2009-08-18 23:09:50 +00:00
tools	update mpfr to 2.4.1	2009-08-20 16:08:52 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile
Config.in	add menuconfig option for selecting initramfs compression	2009-08-16 05:35:34 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org