Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich a1a31f1831 firewall: don't setup nat reflection if negations are used SVN-Revision: 23142		2010-09-28 11:11:11 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	fix build dependencies on packages with multiple variants but no selected virtual packages	2010-09-20 20:17:28 +00:00
package	firewall: don't setup nat reflection if negations are used	2010-09-28 11:11:11 +00:00
scripts	fix build dependencies on packages with multiple variants but no selected virtual packages	2010-09-20 20:17:28 +00:00
target	ar71xx: build firmware image for the TL-MR3420 v1 board	2010-09-27 14:54:04 +00:00
toolchain	gcc: enable non-PIC for mips targets in gcc 4.4+ to reduce code size	2010-09-20 20:49:34 +00:00
tools	firmware-utils/mktplinkfw: add support for the TL-MR3420 v1	2010-09-27 14:54:02 +00:00
.gitignore
BSDmakefile
Config.in	Add support for enabling early printk. Currently only for ARM, because I don't know what EARLY_PRINTK depends on on other architectures.	2010-09-15 16:27:02 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
LICENSE
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README
rules.mk	drop the usr/ prefix when scanning for libgcc.a	2010-09-12 22:19:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org