Openwrt

Openwrt build for Asrock G10 Router

Go to file

Chuanhong Guo 9fc506e9b2 generic: ar8216: add support for get_port_stats() Partially reverts commit `eff3549c58`. AR7240 and AR9341 have buggy hardware switch LED trigger. The AR7240 one doesn't blink and the blinking of port0/port5 is reversed on AR9341 if we swap PHY0 and PHY4. (Only blinking is reversed, which means LED for PHY0 will lit when PHY0 is link up and will blink when PHY4 has active link and vice versa.) On these two chips a software swconfig LED trigger is required. This commit adds swconfig port stats back but: 1. move checking of mib_t/rxb_id into ar8xxx_chip since we can't distinguish ar7240sw and ar8216 using only chip id. 2. don't update mib counter in get_port_stat. This function is called every 0.01s and this capturing procedure will take up a lot of CPU. We already have a mib_work_func updating mib counters every 2s so return the saved counter instead of fetching new data. The blinking rate will be weird but it should solve the previously mentioned CPU time problem. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>		2019-03-24 01:44:26 +01:00
.github
config	build: remove leftovers from previous x86 commits	2019-02-17 18:22:40 +01:00
include	kernel: bump 4.14 to 4.14.107	2019-03-22 18:14:28 +01:00
package	mt76: update to the latest version	2019-03-23 18:03:38 +01:00
scripts	IB: include SUPPORTED_DEVICES in 'make info' output	2019-03-11 05:32:29 +01:00
target	generic: ar8216: add support for get_port_stats()	2019-03-24 01:44:26 +01:00
toolchain	glibc: update to latest 2.27 commit	2019-03-22 10:57:05 +01:00
tools	firmware-utils: mkdlinkfw: add kernel image offset	2019-03-24 01:44:24 +01:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	librpc: remove package	2019-01-22 13:29:46 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org