Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 9f38d4402b ath9k: add a small hack to make changing the channel bandwidth to 5/10 mhz available through debugfs - does not work on all chipsets and is not recommended for production use yet SVN-Revision: 27340		2011-07-01 16:11:53 +00:00
docs
include
package	ath9k: add a small hack to make changing the channel bandwidth to 5/10 mhz available through debugfs - does not work on all chipsets and is not recommended for production use yet	2011-07-01 16:11:53 +00:00
scripts
target	upgrade avr32 u-boot to 2011.06	2011-07-01 11:32:01 +00:00
toolchain	switch avr32 to gcc 4.4, also powerpc targets should work fine with linaro releases	2011-07-01 13:44:03 +00:00
tools	use u-boot 2011.06 as source	2011-07-01 13:36:23 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org