Openwrt

Openwrt build for Asrock G10 Router

Go to file

Radek Dostál 9d35b68776 ar71xx: switch TP-Link RE450 v1 to dynamic partitioning As mentioned in commit `5f24933` recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause an increase in kernel size, making it too big for RE450. RE450 images were not build due to the following error message: os-image partition too big (more than 1572864 bytes): Success Tested on RE450, device boots and was used to send this patch. Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Suggested-by: David Bauer <mail@david-bauer.net> Signed-off-by: Radek Dostál <rd@radekdostal.com> [rewrote commit msg keeping it tight + fixed SoB lines] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>		2018-10-29 11:21:23 +01:00
.github
config	sunxi: fix build without ext4 rootfs	2018-09-29 17:23:11 +02:00
include	kernel: bump 4.14 to 4.14.78	2018-10-22 15:28:31 +02:00
package	mt76: update to the latest version	2018-10-27 17:54:37 +02:00
scripts	ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variant	2018-09-10 10:01:58 +02:00
target	ar71xx: switch TP-Link RE450 v1 to dynamic partitioning	2018-10-29 11:21:23 +01:00
toolchain	glibc: update to latest 2.27 commit (BZ #23562 , BZ #23275 )	2018-10-23 15:57:51 +02:00
tools	ar71xx: switch TP-Link RE450 v1 to dynamic partitioning	2018-10-29 11:21:23 +01:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	build: Unset CDPATH to avoid problems	2018-08-25 11:10:28 +02:00
README	build: README punctuation pendantry	2018-07-08 12:05:16 +01:00
rules.mk	rules.mk: add ESED command	2018-09-24 15:57:27 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org