Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos 9cf1d4e06e ramips: scripts updates In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871		2012-01-23 10:23:32 +00:00
docs
include	autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this	2012-01-20 21:31:03 +00:00
package	base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed	2012-01-22 22:25:42 +00:00
scripts	ext-toolchain.sh: CONFIG_NLS -> CONFIG_BUILD_NLS	2012-01-19 00:03:52 +00:00
target	ramips: scripts updates	2012-01-23 10:23:32 +00:00
toolchain	eglibc 2.14 needs our eglibc patchset as well	2012-01-21 19:39:37 +00:00
tools	libtool: fix accidental sed invocation in libtoolize	2012-01-21 09:49:53 +00:00
.gitignore
BSDmakefile
Config.in	if CONFIG_BUILD_NLS is selected, compile uClibc with locale support	2012-01-01 15:11:11 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE
Makefile	abort built in prereq target if there is no site config file for the current target	2012-01-19 12:19:28 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	use ext-toolchain.sh to integrate external toolchains Use ext-toolchain.sh to wrap external toolchain commands, abort build if certain features such as CONFIG_SOFT_FLOAT or CONFIG_IPV6 are enabled but not supported by the toolchain.	2012-01-18 03:08:09 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org