EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
9b714b6e7b
Openwrt/target/linux/generic/patches-3.3/020-ssb_update.patch
Felix Fietkau 32d1e0ed2c kernel: add a ssb backport required for a new mac80211 update 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40833
2014-05-23 18:48:31 +00:00

3207 lines
98 KiB
Diff
Raw Blame History

--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -43,8 +43,8 @@ static void early_nvram_init(void)
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
mcore_ssb = &bcm47xx_bus.ssb.mipscore;
- base = mcore_ssb->flash_window;
- lim = mcore_ssb->flash_window_size;
+ base = mcore_ssb->pflash.window;
+ lim = mcore_ssb->pflash.window_size;
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
SSB_CHIPCO_IRQ_GPIO);
}
- wgt634u_flash_data.width = mcore->flash_buswidth;
- wgt634u_flash_resource.start = mcore->flash_window;
- wgt634u_flash_resource.end = mcore->flash_window
- + mcore->flash_window_size
+ wgt634u_flash_data.width = mcore->pflash.buswidth;
+ wgt634u_flash_resource.start = mcore->pflash.window;
+ wgt634u_flash_resource.end = mcore->pflash.window
+ + mcore->pflash.window_size
- 1;
return platform_add_devices(wgt634u_devices,
ARRAY_SIZE(wgt634u_devices));
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
If unsure, say N
+config SSB_SFLASH
+ bool "SSB serial flash support"
+ depends on SSB_DRIVER_MIPS
+ default y
+
# Assumption: We are on embedded, if we compile the MIPS core.
config SSB_EMBEDDED
bool
- depends on SSB_DRIVER_MIPS
+ depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
default y
config SSB_DRIVER_EXTIF
@@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
If unsure, say N
+config SSB_DRIVER_GPIO
+ bool "SSB GPIO driver"
+ depends on SSB && GPIOLIB
+ help
+ Driver to provide access to the GPIO pins on the bus.
+
+ If unsure, say N
+
endmenu
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -11,10 +11,12 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o
# built-in drivers
ssb-y += driver_chipcommon.o
ssb-y += driver_chipcommon_pmu.o
+ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
+ssb-$(CONFIG_SSB_DRIVER_GPIO) += driver_gpio.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -29,11 +29,15 @@ static const struct pci_device_id b43_pc
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4350) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -4,6 +4,7 @@
*
* Copyright 2005, Broadcom Corporation
* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
@@ -12,6 +13,7 @@
#include <linux/ssb/ssb_regs.h>
#include <linux/export.h>
#include <linux/pci.h>
+#include <linux/bcm47xx_wdt.h>
#include "ssb_private.h"
@@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
cc->fast_pwrup_delay = tmp;
}
+static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc)
+{
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_alp_clock(cc);
+
+ return 20000000;
+}
+
+static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc)
+{
+ u32 nb;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ if (cc->dev->id.revision < 26)
+ nb = 16;
+ else
+ nb = (cc->dev->id.revision >= 37) ? 32 : 24;
+ } else {
+ nb = 28;
+ }
+ if (nb == 32)
+ return 0xffffffff;
+ else
+ return (1 << nb) - 1;
+}
+
+u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
+{
+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
+
+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ return ssb_chipco_watchdog_timer_set(cc, ticks);
+}
+
+u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
+{
+ struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
+ u32 ticks;
+
+ if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
+ return 0;
+
+ ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
+ return ticks / cc->ticks_per_ms;
+}
+
+static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ /* based on 32KHz ILP clock */
+ return 32;
+ } else {
+ if (cc->dev->id.revision < 18)
+ return ssb_clockspeed(bus) / 1000;
+ else
+ return ssb_chipco_alp_clock(cc) / 1000;
+ }
+}
+
void ssb_chipcommon_init(struct ssb_chipcommon *cc)
{
if (!cc->dev)
return; /* We don't have a ChipCommon */
+
+ spin_lock_init(&cc->gpio_lock);
+
if (cc->dev->id.revision >= 11)
cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
- ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
+ ssb_dbg("chipcommon status is 0x%x\n", cc->status);
if (cc->dev->id.revision >= 20) {
chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
@@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
chipco_powercontrol_init(cc);
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
calc_fast_powerup_delay(cc);
+
+ if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) {
+ cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc);
+ cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
+ }
}
void ssb_chipco_suspend(struct ssb_chipcommon *cc)
@@ -395,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_c
}
/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
+u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
{
- /* instant NMI */
- chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
+ u32 maxt;
+ enum ssb_clkmode clkmode;
+
+ maxt = ssb_chipco_watchdog_get_max_timer(cc);
+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
+ if (ticks == 1)
+ ticks = 2;
+ else if (ticks > maxt)
+ ticks = maxt;
+ chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks);
+ } else {
+ clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC;
+ ssb_chipco_set_clockmode(cc, clkmode);
+ if (ticks > maxt)
+ ticks = maxt;
+ /* instant NMI */
+ chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
+ }
+ return ticks;
}
void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
@@ -418,28 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
EXPORT_SYMBOL(ssb_chipco_gpio_control);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
{
- return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ if (cc->dev->id.revision < 20)
+ return 0xffffffff;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
+}
+
+u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+ unsigned long flags;
+ u32 res = 0;
+
+ if (cc->dev->id.revision < 20)
+ return 0xffffffff;
+
+ spin_lock_irqsave(&cc->gpio_lock, flags);
+ res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value);
+ spin_unlock_irqrestore(&cc->gpio_lock, flags);
+
+ return res;
}
#ifdef CONFIG_SSB_SERIAL
@@ -473,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_ch
chipco_read32(cc, SSB_CHIPCO_CORECTL)
| SSB_CHIPCO_CORECTL_UARTCLK0);
} else if ((ccrev >= 11) && (ccrev != 15)) {
- /* Fixed ALP clock */
- baud_base = 20000000;
- if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
- /* FIXME: baud_base is different for devices with a PMU */
- SSB_WARN_ON(1);
- }
+ baud_base = ssb_chipco_alp_clock(cc);
div = 1;
if (ccrev >= 21) {
/* Turn off UART clock before switching clocksource. */
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -13,6 +13,9 @@
#include <linux/ssb/ssb_driver_chipcommon.h>
#include <linux/delay.h>
#include <linux/export.h>
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
+#endif
#include "ssb_private.h"
@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s
u32 pmuctl, tmp, pllctl;
unsigned int i;
- if ((bus->chip_id == 0x5354) && !crystalfreq) {
- /* The 5354 crystal freq is 25MHz */
- crystalfreq = 25000;
- }
if (crystalfreq)
e = pmu0_plltab_find_entry(crystalfreq);
if (!e)
@@ -111,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
return;
}
- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
- (crystalfreq / 1000), (crystalfreq % 1000));
+ ssb_info("Programming PLL to %u.%03u MHz\n",
+ crystalfreq / 1000, crystalfreq % 1000);
/* First turn the PLL off. */
switch (bus->chip_id) {
@@ -139,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+ ssb_emerg("Failed to turn the PLL off!\n");
/* Set PDIV in PLL control 0. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
@@ -250,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
return;
}
- ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
- (crystalfreq / 1000), (crystalfreq % 1000));
+ ssb_info("Programming PLL to %u.%03u MHz\n",
+ crystalfreq / 1000, crystalfreq % 1000);
/* First turn the PLL off. */
switch (bus->chip_id) {
@@ -276,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
}
tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
- ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
+ ssb_emerg("Failed to turn the PLL off!\n");
/* Set p1div and p2div. */
pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_
u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
if (bus->bustype == SSB_BUSTYPE_SSB) {
- /* TODO: The user may override the crystal frequency. */
+#ifdef CONFIG_BCM47XX
+ char buf[20];
+ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+ crystalfreq = simple_strtoul(buf, NULL, 0);
+#endif
}
switch (bus->chip_id) {
@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_
ssb_pmu1_pllinit_r0(cc, crystalfreq);
break;
case 0x4328:
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
case 0x5354:
+ if (crystalfreq == 0)
+ crystalfreq = 25000;
ssb_pmu0_pllinit_r0(cc, crystalfreq);
break;
case 0x4322:
@@ -339,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
}
break;
+ case 43222:
+ break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PLL init unknown for device %04X\n",
- bus->chip_id);
+ ssb_err("ERROR: PLL init unknown for device %04X\n",
+ bus->chip_id);
}
}
@@ -427,6 +435,7 @@ static void ssb_pmu_resources_init(struc
min_msk = 0xCBB;
break;
case 0x4322:
+ case 43222:
/* We keep the default settings:
* min_msk = 0xCBB
* max_msk = 0x7FFFF
@@ -462,9 +471,8 @@ static void ssb_pmu_resources_init(struc
max_msk = 0xFFFFF;
break;
default:
- ssb_printk(KERN_ERR PFX
- "ERROR: PMU resource config unknown for device %04X\n",
- bus->chip_id);
+ ssb_err("ERROR: PMU resource config unknown for device %04X\n",
+ bus->chip_id);
}
if (updown_tab) {
@@ -516,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
- ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
- cc->pmu.rev, pmucap);
+ ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
+ cc->pmu.rev, pmucap);
if (cc->pmu.rev == 1)
chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
@@ -607,3 +615,102 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
+
+static u32 ssb_pmu_get_alp_clock_clk0(struct ssb_chipcommon *cc)
+{
+ u32 crystalfreq;
+ const struct pmu0_plltab_entry *e = NULL;
+
+ crystalfreq = chipco_read32(cc, SSB_CHIPCO_PMU_CTL) &
+ SSB_CHIPCO_PMU_CTL_XTALFREQ >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT;
+ e = pmu0_plltab_find_entry(crystalfreq);
+ BUG_ON(!e);
+ return e->freq * 1000;
+}
+
+u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x5354:
+ ssb_pmu_get_alp_clock_clk0(cc);
+ default:
+ ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
+ bus->chip_id);
+ return 0;
+ }
+}
+
+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x5354:
+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
+ return 240000000;
+ default:
+ ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
+ bus->chip_id);
+ return 0;
+ }
+}
+
+u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
+{
+ struct ssb_bus *bus = cc->dev->bus;
+
+ switch (bus->chip_id) {
+ case 0x5354:
+ return 120000000;
+ default:
+ ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
+ bus->chip_id);
+ return 0;
+ }
+}
+
+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
+{
+ u32 pmu_ctl = 0;
+
+ switch (cc->dev->bus->chip_id) {
+ case 0x4322:
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
+ if (spuravoid == 1)
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
+ else
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ case 43222:
+ if (spuravoid == 1) {
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
+ } else {
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
+ }
+ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
+ break;
+ default:
+ ssb_printk(KERN_ERR PFX
+ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
+ cc->dev->bus->chip_id);
+ return;
+ }
+
+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
+}
+EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
--- /dev/null
+++ b/drivers/ssb/driver_chipcommon_sflash.c
@@ -0,0 +1,164 @@
+/*
+ * Sonics Silicon Backplane
+ * ChipCommon serial flash interface
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/ssb/ssb.h>
+
+#include "ssb_private.h"
+
+static struct resource ssb_sflash_resource = {
+ .name = "ssb_sflash",
+ .start = SSB_FLASH2,
+ .end = 0,
+ .flags = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device ssb_sflash_dev = {
+ .name = "ssb_sflash",
+ .resource = &ssb_sflash_resource,
+ .num_resources = 1,
+};
+
+struct ssb_sflash_tbl_e {
+ char *name;
+ u32 id;
+ u32 blocksize;
+ u16 numblocks;
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ { "M25P20", 0x11, 0x10000, 4, },
+ { "M25P40", 0x12, 0x10000, 8, },
+
+ { "M25P16", 0x14, 0x10000, 32, },
+ { "M25P32", 0x15, 0x10000, 64, },
+ { "M25P64", 0x16, 0x10000, 128, },
+ { "M25FL128", 0x17, 0x10000, 256, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ { "SST25WF512", 1, 0x1000, 16, },
+ { "SST25VF512", 0x48, 0x1000, 16, },
+ { "SST25WF010", 2, 0x1000, 32, },
+ { "SST25VF010", 0x49, 0x1000, 32, },
+ { "SST25WF020", 3, 0x1000, 64, },
+ { "SST25VF020", 0x43, 0x1000, 64, },
+ { "SST25WF040", 4, 0x1000, 128, },
+ { "SST25VF040", 0x44, 0x1000, 128, },
+ { "SST25VF040B", 0x8d, 0x1000, 128, },
+ { "SST25WF080", 5, 0x1000, 256, },
+ { "SST25VF080B", 0x8e, 0x1000, 256, },
+ { "SST25VF016", 0x41, 0x1000, 512, },
+ { "SST25VF032", 0x4a, 0x1000, 1024, },
+ { "SST25VF064", 0x4b, 0x1000, 2048, },
+ { 0 },
+};
+
+static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ { "AT45DB011", 0xc, 256, 512, },
+ { "AT45DB021", 0x14, 256, 1024, },
+ { "AT45DB041", 0x1c, 256, 2048, },
+ { "AT45DB081", 0x24, 256, 4096, },
+ { "AT45DB161", 0x2c, 512, 4096, },
+ { "AT45DB321", 0x34, 512, 8192, },
+ { "AT45DB642", 0x3c, 1024, 8192, },
+ { 0 },
+};
+
+static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
+{
+ int i;
+ chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
+ SSB_CHIPCO_FLASHCTL_START | opcode);
+ for (i = 0; i < 1000; i++) {
+ if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
+ SSB_CHIPCO_FLASHCTL_BUSY))
+ return;
+ cpu_relax();
+ }
+ pr_err("SFLASH control command failed (timeout)!\n");
+}
+
+/* Initialize serial flash access */
+int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
+ struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
+ const struct ssb_sflash_tbl_e *e;
+ u32 id, id2;
+
+ switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
+
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+
+ chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
+ id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
+
+ switch (id) {
+ case 0xbf:
+ for (e = ssb_sflash_sst_tbl; e->name; e++) {
+ if (e->id == id2)
+ break;
+ }
+ break;
+ case 0x13:
+ return -ENOTSUPP;
+ default:
+ for (e = ssb_sflash_st_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
+ id, id2);
+ return -ENOTSUPP;
+ }
+
+ break;
+ case SSB_CHIPCO_FLASHT_ATSER:
+ ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
+ id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
+
+ for (e = ssb_sflash_at_tbl; e->name; e++) {
+ if (e->id == id)
+ break;
+ }
+ if (!e->name) {
+ pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
+ id);
+ return -ENOTSUPP;
+ }
+
+ break;
+ default:
+ pr_err("Unsupported flash type\n");
+ return -ENOTSUPP;
+ }
+
+ sflash->window = SSB_FLASH2;
+ sflash->blocksize = e->blocksize;
+ sflash->numblocks = e->numblocks;
+ sflash->size = sflash->blocksize * sflash->numblocks;
+ sflash->present = true;
+
+ pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ e->name, sflash->size / 1024, e->blocksize, e->numblocks);
+
+ /* Prepare platform device, but don't register it yet. It's too early,
+ * malloc (required by device_private_init) is not available yet. */
+ ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
+ sflash->size;
+ ssb_sflash_dev.dev.platform_data = sflash;
+
+ return 0;
+}
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -112,10 +112,37 @@ void ssb_extif_get_clockcontrol(struct s
*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
}
-void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
- u32 ticks)
+u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
{
+ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
+
+ return ssb_extif_watchdog_timer_set(extif, ticks);
+}
+
+u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
+{
+ struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
+ u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms;
+
+ ticks = ssb_extif_watchdog_timer_set(extif, ticks);
+
+ return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK;
+}
+
+u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
+{
+ if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER)
+ ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER;
extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
+
+ return ticks;
+}
+
+void ssb_extif_init(struct ssb_extif *extif)
+{
+ if (!extif->dev)
+ return; /* We don't have a Extif core */
+ spin_lock_init(&extif->gpio_lock);
}
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
@@ -125,22 +152,50 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
{
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&extif->gpio_lock, flags);
+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
mask, value);
+ spin_unlock_irqrestore(&extif->gpio_lock, flags);
+
+ return res;
}
u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
{
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&extif->gpio_lock, flags);
+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
mask, value);
+ spin_unlock_irqrestore(&extif->gpio_lock, flags);
+
+ return res;
}
u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
{
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&extif->gpio_lock, flags);
+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
+ spin_unlock_irqrestore(&extif->gpio_lock, flags);
+
+ return res;
}
u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
{
- return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
+ unsigned long flags;
+ u32 res = 0;
+
+ spin_lock_irqsave(&extif->gpio_lock, flags);
+ res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
+ spin_unlock_irqrestore(&extif->gpio_lock, flags);
+
+ return res;
}
--- /dev/null
+++ b/drivers/ssb/driver_gpio.c
@@ -0,0 +1,210 @@
+/*
+ * Sonics Silicon Backplane
+ * GPIO driver
+ *
+ * Copyright 2011, Broadcom Corporation
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <linux/ssb/ssb.h>
+
+#include "ssb_private.h"
+
+static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip)
+{
+ return container_of(chip, struct ssb_bus, gpio);
+}
+
+static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio);
+}
+
+static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
+ int value)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
+}
+
+static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 0);
+ return 0;
+}
+
+static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 1 << gpio);
+ ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
+ return 0;
+}
+
+static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_chipco_gpio_control(&bus->chipco, 1 << gpio, 0);
+ /* clear pulldown */
+ ssb_chipco_gpio_pulldown(&bus->chipco, 1 << gpio, 0);
+ /* Set pullup */
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 1 << gpio);
+
+ return 0;
+}
+
+static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ /* clear pullup */
+ ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
+}
+
+static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ return ssb_mips_irq(bus->chipco.dev) + 2;
+ else
+ return -EINVAL;
+}
+
+static int ssb_gpio_chipco_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+
+ chip->label = "ssb_chipco_gpio";
+ chip->owner = THIS_MODULE;
+ chip->request = ssb_gpio_chipco_request;
+ chip->free = ssb_gpio_chipco_free;
+ chip->get = ssb_gpio_chipco_get_value;
+ chip->set = ssb_gpio_chipco_set_value;
+ chip->direction_input = ssb_gpio_chipco_direction_input;
+ chip->direction_output = ssb_gpio_chipco_direction_output;
+ chip->to_irq = ssb_gpio_chipco_to_irq;
+ chip->ngpio = 16;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+ * a random base number. */
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ chip->base = 0;
+ else
+ chip->base = -1;
+
+ return gpiochip_add(chip);
+}
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+
+static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio);
+}
+
+static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
+ int value)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
+}
+
+static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
+ unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 0);
+ return 0;
+}
+
+static int ssb_gpio_extif_direction_output(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 1 << gpio);
+ ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
+ return 0;
+}
+
+static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+ struct ssb_bus *bus = ssb_gpio_get_bus(chip);
+
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ return ssb_mips_irq(bus->extif.dev) + 2;
+ else
+ return -EINVAL;
+}
+
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ struct gpio_chip *chip = &bus->gpio;
+
+ chip->label = "ssb_extif_gpio";
+ chip->owner = THIS_MODULE;
+ chip->get = ssb_gpio_extif_get_value;
+ chip->set = ssb_gpio_extif_set_value;
+ chip->direction_input = ssb_gpio_extif_direction_input;
+ chip->direction_output = ssb_gpio_extif_direction_output;
+ chip->to_irq = ssb_gpio_extif_to_irq;
+ chip->ngpio = 5;
+ /* There is just one SoC in one device and its GPIO addresses should be
+ * deterministic to address them more easily. The other buses could get
+ * a random base number. */
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ chip->base = 0;
+ else
+ chip->base = -1;
+
+ return gpiochip_add(chip);
+}
+
+#else
+static int ssb_gpio_extif_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
+#endif
+
+int ssb_gpio_init(struct ssb_bus *bus)
+{
+ if (ssb_chipco_available(&bus->chipco))
+ return ssb_gpio_chipco_init(bus);
+ else if (ssb_extif_available(&bus->extif))
+ return ssb_gpio_extif_init(bus);
+ else
+ SSB_WARN_ON(1);
+
+ return -1;
+}
+
+int ssb_gpio_unregister(struct ssb_bus *bus)
+{
+ if (ssb_chipco_available(&bus->chipco) ||
+ ssb_extif_available(&bus->extif)) {
+ return gpiochip_remove(&bus->gpio);
+ } else {
+ SSB_WARN_ON(1);
+ }
+
+ return -1;
+}
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -10,6 +10,7 @@
#include <linux/ssb/ssb.h>
+#include <linux/mtd/physmap.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
@@ -17,6 +18,25 @@
#include "ssb_private.h"
+static const char * const part_probes[] = { "bcm47xxpart", NULL };
+
+static struct physmap_flash_data ssb_pflash_data = {
+ .part_probe_types = part_probes,
+};
+
+static struct resource ssb_pflash_resource = {
+ .name = "ssb_pflash",
+ .flags = IORESOURCE_MEM,
+};
+
+struct platform_device ssb_pflash_dev = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &ssb_pflash_data,
+ },
+ .resource = &ssb_pflash_resource,
+ .num_resources = 1,
+};
static inline u32 mips_read32(struct ssb_mipscore *mcore,
u16 offset)
@@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
ssb_write32(mdev, SSB_IPSFLAG, irqflag);
}
- ssb_dprintk(KERN_INFO PFX
- "set_irq: core 0x%04x, irq %d => %d\n",
- dev->id.coreid, oldirq+2, irq+2);
+ ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
+ dev->id.coreid, oldirq+2, irq+2);
}
static void print_irq(struct ssb_device *dev, unsigned int irq)
{
- int i;
static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
- ssb_dprintk(KERN_INFO PFX
- "core 0x%04x, irq :", dev->id.coreid);
- for (i = 0; i <= 6; i++) {
- ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
- }
- ssb_dprintk("\n");
+ ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
+ dev->id.coreid,
+ irq_name[0], irq == 0 ? "*" : " ",
+ irq_name[1], irq == 1 ? "*" : " ",
+ irq_name[2], irq == 2 ? "*" : " ",
+ irq_name[3], irq == 3 ? "*" : " ",
+ irq_name[4], irq == 4 ? "*" : " ",
+ irq_name[5], irq == 5 ? "*" : " ",
+ irq_name[6], irq == 6 ? "*" : " ");
}
static void dump_irq(struct ssb_bus *bus)
@@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
{
struct ssb_bus *bus = mcore->dev->bus;
- if (bus->extif.dev)
+ if (ssb_extif_available(&bus->extif))
mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
- else if (bus->chipco.dev)
+ else if (ssb_chipco_available(&bus->chipco))
mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
else
mcore->nr_serial_ports = 0;
@@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct
static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
{
struct ssb_bus *bus = mcore->dev->bus;
+ struct ssb_pflash *pflash = &mcore->pflash;
- mcore->flash_buswidth = 2;
- if (bus->chipco.dev) {
- mcore->flash_window = 0x1c000000;
- mcore->flash_window_size = 0x02000000;
+ /* When there is no chipcommon on the bus there is 4MB flash */
+ if (!ssb_chipco_available(&bus->chipco)) {
+ pflash->present = true;
+ pflash->buswidth = 2;
+ pflash->window = SSB_FLASH1;
+ pflash->window_size = SSB_FLASH1_SZ;
+ goto ssb_pflash;
+ }
+
+ /* There is ChipCommon, so use it to read info about flash */
+ switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
+ case SSB_CHIPCO_FLASHT_STSER:
+ case SSB_CHIPCO_FLASHT_ATSER:
+ pr_debug("Found serial flash\n");
+ ssb_sflash_init(&bus->chipco);
+ break;
+ case SSB_CHIPCO_FLASHT_PARA:
+ pr_debug("Found parallel flash\n");
+ pflash->present = true;
+ pflash->window = SSB_FLASH2;
+ pflash->window_size = SSB_FLASH2_SZ;
if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
& SSB_CHIPCO_CFG_DS16) == 0)
- mcore->flash_buswidth = 1;
- } else {
- mcore->flash_window = 0x1fc00000;
- mcore->flash_window_size = 0x00400000;
+ pflash->buswidth = 1;
+ else
+ pflash->buswidth = 2;
+ break;
+ }
+
+ssb_pflash:
+ if (pflash->present) {
+ ssb_pflash_data.width = pflash->buswidth;
+ ssb_pflash_resource.start = pflash->window;
+ ssb_pflash_resource.end = pflash->window + pflash->window_size;
}
}
@@ -208,9 +254,12 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
struct ssb_bus *bus = mcore->dev->bus;
u32 pll_type, n, m, rate = 0;
- if (bus->extif.dev) {
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_cpu_clock(&bus->chipco);
+
+ if (ssb_extif_available(&bus->extif)) {
ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
- } else if (bus->chipco.dev) {
+ } else if (ssb_chipco_available(&bus->chipco)) {
ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
} else
return 0;
@@ -238,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
if (!mcore->dev)
return; /* We don't have a MIPS core */
- ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
+ ssb_dbg("Initializing MIPS core...\n");
bus = mcore->dev->bus;
hz = ssb_clockspeed(bus);
@@ -246,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
hz = 100000000;
ns = 1000000000 / hz;
- if (bus->extif.dev)
+ if (ssb_extif_available(&bus->extif))
ssb_extif_timing_init(&bus->extif, ns);
- else if (bus->chipco.dev)
+ else if (ssb_chipco_available(&bus->chipco))
ssb_chipco_timing_init(&bus->chipco, ns);
/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
@@ -286,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
break;
}
}
- ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
+ ssb_dbg("after irq reconfiguration\n");
dump_irq(bus);
ssb_mips_serial_init(mcore);
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
return -ENODEV;
}
- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
- pci_name(d));
+ ssb_info("PCI: Fixing up device %s\n", pci_name(d));
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
@@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+ ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
- ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+ ssb_err("PCI: SSB bridge enable failed\n");
return;
}
@@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
/* Make sure our latency is high enough to handle the devices behind us */
lat = 168;
- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
- pci_name(dev), lat);
+ ssb_info("PCI: Fixing latency timer of device %s to %u\n",
+ pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
@@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
return;
extpci_core = pc;
- ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
+ ssb_dbg("PCIcore in host mode found\n");
/* Reset devices on the external PCI bus */
val = SSB_PCICORE_CTL_RST_OE;
val |= SSB_PCICORE_CTL_CLK_OE;
@@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
udelay(1); /* Assertion time demanded by the PCI standard */
if (pc->dev->bus->has_cardbus_slot) {
- ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
+ ssb_dbg("CardBus slot detected\n");
pc->cardbusmode = 1;
/* GPIO 1 resets the bridge */
ssb_gpio_out(pc->dev->bus, 1, 1);
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -4,11 +4,13 @@
*
* Copyright 2005-2008, Broadcom Corporation
* Copyright 2006-2008, Michael Buesch <m@bues.ch>
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/export.h>
+#include <linux/platform_device.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
@@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
}
EXPORT_SYMBOL(ssb_watchdog_timer_set);
+int ssb_watchdog_register(struct ssb_bus *bus)
+{
+ struct bcm47xx_wdt wdt = {};
+ struct platform_device *pdev;
+
+ if (ssb_chipco_available(&bus->chipco)) {
+ wdt.driver_data = &bus->chipco;
+ wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
+ wdt.timer_set_ms = ssb_chipco_watchdog_timer_set_ms;
+ wdt.max_timer_ms = bus->chipco.max_timer_ms;
+ } else if (ssb_extif_available(&bus->extif)) {
+ wdt.driver_data = &bus->extif;
+ wdt.timer_set = ssb_extif_watchdog_timer_set_wdt;
+ wdt.timer_set_ms = ssb_extif_watchdog_timer_set_ms;
+ wdt.max_timer_ms = SSB_EXTIF_WATCHDOG_MAX_TIMER_MS;
+ } else {
+ return -ENODEV;
+ }
+
+ pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
+ bus->busnumber, &wdt,
+ sizeof(wdt));
+ if (IS_ERR(pdev)) {
+ ssb_dbg("can not register watchdog device, err: %li\n",
+ PTR_ERR(pdev));
+ return PTR_ERR(pdev);
+ }
+
+ bus->watchdog = pdev;
+ return 0;
+}
+
u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
{
unsigned long flags;
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
@@ -289,8 +290,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
err = sdrv->probe(sdev, &sdev->id);
if (err) {
- ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
- dev_name(sdev->dev));
+ ssb_err("Failed to thaw device %s\n",
+ dev_name(sdev->dev));
result = err;
}
ssb_driver_put(sdrv);
@@ -449,10 +450,23 @@ static void ssb_devices_unregister(struc
if (sdev->dev)
device_unregister(sdev->dev);
}
+
+#ifdef CONFIG_SSB_EMBEDDED
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ platform_device_unregister(bus->watchdog);
+#endif
}
void ssb_bus_unregister(struct ssb_bus *bus)
{
+ int err;
+
+ err = ssb_gpio_unregister(bus);
+ if (err == -EBUSY)
+ ssb_dbg("Some GPIOs are still in use\n");
+ else if (err)
+ ssb_dbg("Can not unregister GPIO driver: %i\n", err);
+
ssb_buses_lock();
ssb_devices_unregister(bus);
list_del(&bus->list);
@@ -498,8 +512,7 @@ static int ssb_devices_register(struct s
devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
if (!devwrap) {
- ssb_printk(KERN_ERR PFX
- "Could not allocate device\n");
+ ssb_err("Could not allocate device\n");
err = -ENOMEM;
goto error;
}
@@ -538,9 +551,7 @@ static int ssb_devices_register(struct s
sdev->dev = dev;
err = device_register(dev);
if (err) {
- ssb_printk(KERN_ERR PFX
- "Could not register %s\n",
- dev_name(dev));
+ ssb_err("Could not register %s\n", dev_name(dev));
/* Set dev to NULL to not unregister
* dev on error unwinding. */
sdev->dev = NULL;
@@ -550,6 +561,22 @@ static int ssb_devices_register(struct s
dev_idx++;
}
+#ifdef CONFIG_SSB_DRIVER_MIPS
+ if (bus->mipscore.pflash.present) {
+ err = platform_device_register(&ssb_pflash_dev);
+ if (err)
+ pr_err("Error registering parallel flash\n");
+ }
+#endif
+
+#ifdef CONFIG_SSB_SFLASH
+ if (bus->mipscore.sflash.present) {
+ err = platform_device_register(&ssb_sflash_dev);
+ if (err)
+ pr_err("Error registering serial flash\n");
+ }
+#endif
+
return 0;
error:
/* Unwind the already registered devices. */
@@ -577,6 +604,8 @@ static int __devinit ssb_attach_queued_b
if (err)
goto error;
ssb_pcicore_init(&bus->pcicore);
+ if (bus->bustype == SSB_BUSTYPE_SSB)
+ ssb_watchdog_register(bus);
ssb_bus_may_powerdown(bus);
err = ssb_devices_register(bus);
@@ -812,7 +841,13 @@ static int __devinit ssb_bus_register(st
if (err)
goto err_pcmcia_exit;
ssb_chipcommon_init(&bus->chipco);
+ ssb_extif_init(&bus->extif);
ssb_mipscore_init(&bus->mipscore);
+ err = ssb_gpio_init(bus);
+ if (err == -ENOTSUPP)
+ ssb_dbg("GPIO driver not activated\n");
+ else if (err)
+ ssb_dbg("Error registering GPIO driver: %i\n", err);
err = ssb_fetch_invariants(bus, get_invariants);
if (err) {
ssb_bus_may_powerdown(bus);
@@ -863,11 +898,11 @@ int __devinit ssb_bus_pcibus_register(st
err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
if (!err) {
- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
- "PCI device %s\n", dev_name(&host_pci->dev));
+ ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
+ dev_name(&host_pci->dev));
} else {
- ssb_printk(KERN_ERR PFX "Failed to register PCI version"
- " of SSB with error %d\n", err);
+ ssb_err("Failed to register PCI version of SSB with error %d\n",
+ err);
}
return err;
@@ -888,8 +923,8 @@ int __devinit ssb_bus_pcmciabus_register
err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
if (!err) {
- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
- "PCMCIA device %s\n", pcmcia_dev->devname);
+ ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
+ pcmcia_dev->devname);
}
return err;
@@ -911,8 +946,8 @@ int __devinit ssb_bus_sdiobus_register(s
err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
if (!err) {
- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
- "SDIO device %s\n", sdio_func_id(func));
+ ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
+ sdio_func_id(func));
}
return err;
@@ -931,8 +966,8 @@ int __devinit ssb_bus_ssbbus_register(st
err = ssb_bus_register(bus, get_invariants, baseaddr);
if (!err) {
- ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
- "address 0x%08lX\n", baseaddr);
+ ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
+ baseaddr);
}
return err;
@@ -1094,6 +1129,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
u32 plltype;
u32 clkctl_n, clkctl_m;
+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
+ return ssb_pmu_get_controlclock(&bus->chipco);
+
if (ssb_extif_available(&bus->extif))
ssb_extif_get_clockcontrol(&bus->extif, &plltype,
&clkctl_n, &clkctl_m);
@@ -1131,8 +1169,7 @@ static u32 ssb_tmslow_reject_bitmask(str
case SSB_IDLOW_SSBREV_27: /* same here */
return SSB_TMSLOW_REJECT; /* this is a guess */
default:
- printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
- WARN_ON(1);
+ WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
}
return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
}
@@ -1324,7 +1361,7 @@ out:
#endif
return err;
error:
- ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
+ ssb_err("Bus powerdown failed\n");
goto out;
}
EXPORT_SYMBOL(ssb_bus_may_powerdown);
@@ -1347,7 +1384,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
return 0;
error:
- ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
+ ssb_err("Bus powerup failed\n");
return err;
}
EXPORT_SYMBOL(ssb_bus_powerup);
@@ -1455,15 +1492,13 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
- "initialization failed\n");
+ ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_gige_init();
if (err) {
- ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
- "driver initialization failed\n");
+ ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
}
return 0;
error:
- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+ ssb_err("Failed to switch to core %u\n", coreidx);
return -ENODEV;
}
@@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
unsigned long flags;
#if SSB_VERBOSE_PCICORESWITCH_DEBUG
- ssb_printk(KERN_INFO PFX
- "Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ ssb_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid),
+ dev->core_index);
#endif
spin_lock_irqsave(&bus->bar_lock, flags);
@@ -178,6 +177,18 @@ err_pci:
#define SPEX(_outvar, _offset, _mask, _shift) \
SPEX16(_outvar, _offset, _mask, _shift)
+#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
+ do { \
+ SPEX(_field[0], _offset + 0, _mask, _shift); \
+ SPEX(_field[1], _offset + 2, _mask, _shift); \
+ SPEX(_field[2], _offset + 4, _mask, _shift); \
+ SPEX(_field[3], _offset + 6, _mask, _shift); \
+ SPEX(_field[4], _offset + 8, _mask, _shift); \
+ SPEX(_field[5], _offset + 10, _mask, _shift); \
+ SPEX(_field[6], _offset + 12, _mask, _shift); \
+ SPEX(_field[7], _offset + 14, _mask, _shift); \
+ } while (0)
+
static inline u8 ssb_crc8(u8 crc, u8 data)
{
@@ -219,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
return t[crc ^ data];
}
+static void sprom_get_mac(char *mac, const u16 *in)
+{
+ int i;
+ for (i = 0; i < 3; i++) {
+ *mac++ = in[i] >> 8;
+ *mac++ = in[i];
+ }
+}
+
static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
{
int word;
@@ -266,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
u32 spromctl;
u16 size = bus->sprom_size;
- ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
if (err)
goto err_ctlreg;
@@ -274,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
if (err)
goto err_ctlreg;
- ssb_printk(KERN_NOTICE PFX "[ 0%%");
+ ssb_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_printk("25%%");
+ ssb_cont("25%%");
else if (i == size / 2)
- ssb_printk("50%%");
+ ssb_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_printk("75%%");
+ ssb_cont("75%%");
else if (i % 2)
- ssb_printk(".");
+ ssb_cont(".");
writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
mmiowb();
msleep(20);
@@ -297,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
if (err)
goto err_ctlreg;
msleep(500);
- ssb_printk("100%% ]\n");
- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+ ssb_cont("100%% ]\n");
+ ssb_notice("SPROM written\n");
return 0;
err_ctlreg:
- ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
+ ssb_err("Could not access SPROM control register.\n");
return err;
}
@@ -327,11 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
return (s8)gain;
}
+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
+{
+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
+ SSB_SPROM2_MAXP_A_LO_SHIFT);
+}
+
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
- int i;
- u16 v;
- s8 gain;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
@@ -341,19 +373,10 @@ static void sprom_extract_r123(struct ss
loc[1] = SSB_SPROM1_ET0MAC;
loc[2] = SSB_SPROM1_ET1MAC;
}
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(loc[0]) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
+ sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(loc[1]) + i];
- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(loc[2]) + i];
- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
- }
+ sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
+ sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
}
SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
@@ -361,8 +384,10 @@ static void sprom_extract_r123(struct ss
SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ if (out->revision == 1)
+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+ SSB_SPROM1_BINF_CCODE_SHIFT);
SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
SSB_SPROM1_BINF_ANTA_SHIFT);
SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
@@ -386,24 +411,19 @@ static void sprom_extract_r123(struct ss
SSB_SPROM1_ITSSI_A_SHIFT);
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- if (out->revision >= 2)
- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+
+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
/* Extract the antenna gain values. */
- gain = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_BG,
- SSB_SPROM1_AGAIN_BG_SHIFT);
- out->antenna_gain.ghz24.a0 = gain;
- out->antenna_gain.ghz24.a1 = gain;
- out->antenna_gain.ghz24.a2 = gain;
- out->antenna_gain.ghz24.a3 = gain;
- gain = r123_extract_antgain(out->revision, in,
- SSB_SPROM1_AGAIN_A,
- SSB_SPROM1_AGAIN_A_SHIFT);
- out->antenna_gain.ghz5.a0 = gain;
- out->antenna_gain.ghz5.a1 = gain;
- out->antenna_gain.ghz5.a2 = gain;
- out->antenna_gain.ghz5.a3 = gain;
+ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_BG,
+ SSB_SPROM1_AGAIN_BG_SHIFT);
+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
+ if (out->revision >= 2)
+ sprom_extract_r23(out, in);
}
/* Revs 4 5 and 8 have partially shared layout */
@@ -448,30 +468,30 @@ static void sprom_extract_r458(struct ss
static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
{
- int i;
- u16 v;
u16 il0mac_offset;
if (out->revision == 4)
il0mac_offset = SSB_SPROM4_IL0MAC;
else
il0mac_offset = SSB_SPROM5_IL0MAC;
- /* extract the MAC address */
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(il0mac_offset) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
+
+ sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
+
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
if (out->revision == 4) {
- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
} else {
- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
@@ -504,16 +524,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
+ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
+ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
+ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
+ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
sprom_extract_r458(out, in);
@@ -523,14 +541,21 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
- u16 v;
+ u16 o;
+ u16 pwr_info_offset[] = {
+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
+ };
+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
+ ARRAY_SIZE(out->core_pwr_info));
/* extract the MAC address */
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
+ sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
+
+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
@@ -596,16 +621,46 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
+ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
+ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
+ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
+ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
+
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
+ SSB_SPROM8_2G_MAXP, 0);
+
+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
+
+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
+ SSB_SPROM8_5G_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GH_MAXP, 0);
+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
+
+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
+ }
/* Extract FEM info */
SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
@@ -630,6 +685,63 @@ static void sprom_extract_r8(struct ssb_
SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
+ SSB_SPROM8_LEDDC_ON_SHIFT);
+ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
+ SSB_SPROM8_LEDDC_OFF_SHIFT);
+
+ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
+ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
+ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
+ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
+ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
+ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
+
+ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
+
+ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
+ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
+
+ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
+ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
+ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
+ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
+ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
+ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
+ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
+ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
+ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
+ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
+ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
+ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
+
+ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
+ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
+ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
+ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
+
+ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
+ SSB_SPROM8_THERMAL_TRESH_SHIFT);
+ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
+ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
+ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
+ SSB_SPROM8_TEMPDELTA_PHYCAL,
+ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
+ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
+ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
+ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
+ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
+ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
sprom_extract_r458(out, in);
/* TODO - get remaining rev 8 stuff needed */
@@ -641,7 +753,7 @@ static int sprom_extract(struct ssb_bus
memset(out, 0, sizeof(*out));
out->revision = in[size - 1] & 0x00FF;
- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
+ ssb_dbg("SPROM revision %d detected\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
@@ -650,7 +762,7 @@ static int sprom_extract(struct ssb_bus
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
- ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+ ssb_dbg("SPROM treated as revision %d\n", out->revision);
}
switch (out->revision) {
@@ -667,9 +779,8 @@ static int sprom_extract(struct ssb_bus
sprom_extract_r8(out, in);
break;
default:
- ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
- " revision %d detected. Will extract"
- " v1\n", out->revision);
+ ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
+ out->revision);
out->revision = 1;
sprom_extract_r123(out, in);
}
@@ -689,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
u16 *buf;
if (!ssb_is_sprom_available(bus)) {
- ssb_printk(KERN_ERR PFX "No SPROM available!\n");
+ ssb_err("No SPROM available!\n");
return -ENODEV;
}
if (bus->chipco.dev) { /* can be unavailable! */
@@ -708,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
} else {
bus->sprom_offset = SSB_SPROM_BASE1;
}
- ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
+ ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
@@ -733,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
* available for this device in some other storage */
err = ssb_fill_sprom_with_fallback(bus, sprom);
if (err) {
- ssb_printk(KERN_WARNING PFX "WARNING: Using"
- " fallback SPROM failed (err %d)\n",
- err);
+ ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
+ err);
} else {
- ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
- " revision %d provided by"
- " platform.\n", sprom->revision);
+ ssb_dbg("Using SPROM revision %d provided by platform\n",
+ sprom->revision);
err = 0;
goto out_free;
}
- ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
- " SPROM CRC (corrupt SPROM)\n");
+ ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
}
}
err = sprom_extract(bus, sprom, buf, bus->sprom_size);
@@ -759,7 +867,6 @@ static void ssb_pci_get_boardinfo(struct
{
bi->vendor = bus->host_pci->subsystem_vendor;
bi->type = bus->host_pci->subsystem_device;
- bi->rev = bus->host_pci->revision;
}
int ssb_pci_get_invariants(struct ssb_bus *bus,
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
- pci_set_power_state(dev, 0);
+ pci_set_power_state(dev, PCI_D0);
err = pci_enable_device(dev);
if (err)
return err;
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
return 0;
error:
- ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
+ ssb_err("Failed to switch to core %u\n", coreidx);
return err;
}
@@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
int err;
#if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
- ssb_printk(KERN_INFO PFX
- "Switching to %s core, index %d\n",
- ssb_core_name(dev->id.coreid),
- dev->core_index);
+ ssb_info("Switching to %s core, index %d\n",
+ ssb_core_name(dev->id.coreid),
+ dev->core_index);
#endif
err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
return 0;
error:
- ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
+ ssb_err("Failed to switch pcmcia segment\n");
return err;
}
@@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
bool failed = 0;
size_t size = SSB_PCMCIA_SPROM_SIZE;
- ssb_printk(KERN_NOTICE PFX
- "Writing SPROM. Do NOT turn off the power! "
- "Please stand by...\n");
+ ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
if (err) {
- ssb_printk(KERN_NOTICE PFX
- "Could not enable SPROM write access.\n");
+ ssb_notice("Could not enable SPROM write access\n");
return -EBUSY;
}
- ssb_printk(KERN_NOTICE PFX "[ 0%%");
+ ssb_notice("[ 0%%");
msleep(500);
for (i = 0; i < size; i++) {
if (i == size / 4)
- ssb_printk("25%%");
+ ssb_cont("25%%");
else if (i == size / 2)
- ssb_printk("50%%");
+ ssb_cont("50%%");
else if (i == (size * 3) / 4)
- ssb_printk("75%%");
+ ssb_cont("75%%");
else if (i % 2)
- ssb_printk(".");
+ ssb_cont(".");
err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
if (err) {
- ssb_printk(KERN_NOTICE PFX
- "Failed to write to SPROM.\n");
+ ssb_notice("Failed to write to SPROM\n");
failed = 1;
break;
}
}
err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
if (err) {
- ssb_printk(KERN_NOTICE PFX
- "Could not disable SPROM write access.\n");
+ ssb_notice("Could not disable SPROM write access\n");
failed = 1;
}
msleep(500);
if (!failed) {
- ssb_printk("100%% ]\n");
- ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
+ ssb_cont("100%% ]\n");
+ ssb_notice("SPROM written\n");
}
return failed ? -EBUSY : 0;
@@ -676,14 +670,10 @@ static int ssb_pcmcia_do_get_invariants(
case SSB_PCMCIA_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->TupleDataLen != 2,
"antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+ sprom->antenna_gain.a0 = tuple->TupleData[1];
+ sprom->antenna_gain.a1 = tuple->TupleData[1];
+ sprom->antenna_gain.a2 = tuple->TupleData[1];
+ sprom->antenna_gain.a3 = tuple->TupleData[1];
break;
case SSB_PCMCIA_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
@@ -704,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
return -ENOSPC; /* continue with next entry */
error:
- ssb_printk(KERN_ERR PFX
+ ssb_err(
"PCMCIA: Failed to fetch device invariants: %s\n",
error_description);
return -ENODEV;
@@ -726,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
ssb_pcmcia_get_mac, sprom);
if (res != 0) {
- ssb_printk(KERN_ERR PFX
+ ssb_err(
"PCMCIA: Failed to fetch MAC address\n");
return -ENODEV;
}
@@ -737,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
if ((res == 0) || (res == -ENOSPC))
return 0;
- ssb_printk(KERN_ERR PFX
+ ssb_err(
"PCMCIA: Failed to fetch device invariants\n");
return -ENODEV;
}
@@ -847,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
return 0;
error:
- ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
+ ssb_err("Failed to initialize PCMCIA host device\n");
return err;
}
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -90,6 +90,8 @@ const char *ssb_core_name(u16 coreid)
return "ARM 1176";
case SSB_DEV_ARM_7TDMI:
return "ARM 7TDMI";
+ case SSB_DEV_ARM_CM3:
+ return "ARM Cortex M3";
}
return "UNKNOWN";
}
@@ -123,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
chipid_fallback = 0x4401;
break;
default:
- ssb_printk(KERN_ERR PFX
- "PCI-ID not in fallback list\n");
+ ssb_err("PCI-ID not in fallback list\n");
}
return chipid_fallback;
@@ -150,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
case 0x4704:
return 9;
default:
- ssb_printk(KERN_ERR PFX
- "CHIPID not in nrcores fallback list\n");
+ ssb_err("CHIPID not in nrcores fallback list\n");
}
return 1;
@@ -318,12 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->chip_package = 0;
}
}
+ ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
+ bus->chip_id, bus->chip_rev, bus->chip_package);
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
- ssb_printk(KERN_ERR PFX
- "More than %d ssb cores found (%d)\n",
- SSB_MAX_NR_CORES, bus->nr_devices);
+ ssb_err("More than %d ssb cores found (%d)\n",
+ SSB_MAX_NR_CORES, bus->nr_devices);
goto err_unmap;
}
if (bus->bustype == SSB_BUSTYPE_SSB) {
@@ -365,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
nr_80211_cores++;
if (nr_80211_cores > 1) {
if (!we_support_multiple_80211_cores(bus)) {
- ssb_dprintk(KERN_INFO PFX "Ignoring additional "
- "802.11 core\n");
+ ssb_dbg("Ignoring additional 802.11 core\n");
continue;
}
}
@@ -374,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_EXTIF:
#ifdef CONFIG_SSB_DRIVER_EXTIF
if (bus->extif.dev) {
- ssb_printk(KERN_WARNING PFX
- "WARNING: Multiple EXTIFs found\n");
+ ssb_warn("WARNING: Multiple EXTIFs found\n");
break;
}
bus->extif.dev = dev;
@@ -383,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
break;
case SSB_DEV_CHIPCOMMON:
if (bus->chipco.dev) {
- ssb_printk(KERN_WARNING PFX
- "WARNING: Multiple ChipCommon found\n");
+ ssb_warn("WARNING: Multiple ChipCommon found\n");
break;
}
bus->chipco.dev = dev;
@@ -393,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
case SSB_DEV_MIPS_3302:
#ifdef CONFIG_SSB_DRIVER_MIPS
if (bus->mipscore.dev) {
- ssb_printk(KERN_WARNING PFX
- "WARNING: Multiple MIPS cores found\n");
+ ssb_warn("WARNING: Multiple MIPS cores found\n");
break;
}
bus->mipscore.dev = dev;
@@ -415,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
}
}
if (bus->pcicore.dev) {
- ssb_printk(KERN_WARNING PFX
- "WARNING: Multiple PCI(E) cores found\n");
+ ssb_warn("WARNING: Multiple PCI(E) cores found\n");
break;
}
bus->pcicore.dev = dev;
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
case SSB_SDIO_CIS_ANTGAIN:
GOTO_ERROR_ON(tuple->size != 2,
"antg tpl size");
- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
+ sprom->antenna_gain.a0 = tuple->data[1];
+ sprom->antenna_gain.a1 = tuple->data[1];
+ sprom->antenna_gain.a2 = tuple->data[1];
+ sprom->antenna_gain.a3 = tuple->data[1];
break;
case SSB_SDIO_CIS_BFLAGS:
GOTO_ERROR_ON((tuple->size != 3) &&
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
while (cnt < sprom_size_words) {
memcpy(tmp, dump, 4);
dump += 4;
- err = strict_strtoul(tmp, 16, &parsed);
+ err = kstrtoul(tmp, 16, &parsed);
if (err)
return err;
sprom[cnt++] = swab16((u16)parsed);
@@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
goto out_kfree;
err = ssb_devices_freeze(bus, &freeze);
if (err) {
- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
+ ssb_err("SPROM write: Could not freeze all devices\n");
goto out_unlock;
}
res = sprom_write(bus, sprom);
err = ssb_devices_thaw(&freeze);
if (err)
- ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
+ ssb_err("SPROM write: Could not thaw all devices\n");
out_unlock:
mutex_unlock(&bus->sprom_mutex);
out_kfree:
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -3,21 +3,33 @@
#include <linux/ssb/ssb.h>
#include <linux/types.h>
+#include <linux/bcm47xx_wdt.h>
#define PFX "ssb: "
#ifdef CONFIG_SSB_SILENT
-# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
+# define ssb_printk(fmt, ...) \
+ do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
#else
-# define ssb_printk printk
+# define ssb_printk(fmt, ...) \
+ printk(fmt, ##__VA_ARGS__)
#endif /* CONFIG_SSB_SILENT */
+#define ssb_emerg(fmt, ...) ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
+#define ssb_err(fmt, ...) ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
+#define ssb_warn(fmt, ...) ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
+#define ssb_notice(fmt, ...) ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
+#define ssb_info(fmt, ...) ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
+#define ssb_cont(fmt, ...) ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
+
/* dprintk: Debugging printk; vanishes for non-debug compilation */
#ifdef CONFIG_SSB_DEBUG
-# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x)
+# define ssb_dbg(fmt, ...) \
+ ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
#else
-# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0)
+# define ssb_dbg(fmt, ...) \
+ do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
#endif
#ifdef CONFIG_SSB_DEBUG
@@ -207,4 +219,79 @@ static inline void b43_pci_ssb_bridge_ex
}
#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+/* driver_chipcommon_pmu.c */
+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
+extern u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc);
+
+extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
+ u32 ticks);
+extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+
+/* driver_chipcommon_sflash.c */
+#ifdef CONFIG_SSB_SFLASH
+int ssb_sflash_init(struct ssb_chipcommon *cc);
+#else
+static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+{
+ pr_err("Serial flash not supported\n");
+ return 0;
+}
+#endif /* CONFIG_SSB_SFLASH */
+
+#ifdef CONFIG_SSB_DRIVER_MIPS
+extern struct platform_device ssb_pflash_dev;
+#endif
+
+#ifdef CONFIG_SSB_SFLASH
+extern struct platform_device ssb_sflash_dev;
+#endif
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
+#else
+static inline u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
+ u32 ticks)
+{
+ return 0;
+}
+static inline u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt,
+ u32 ms)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SSB_EMBEDDED
+extern int ssb_watchdog_register(struct ssb_bus *bus);
+#else /* CONFIG_SSB_EMBEDDED */
+static inline int ssb_watchdog_register(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_EMBEDDED */
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+extern void ssb_extif_init(struct ssb_extif *extif);
+#else
+static inline void ssb_extif_init(struct ssb_extif *extif)
+{
+}
+#endif
+
+#ifdef CONFIG_SSB_DRIVER_GPIO
+extern int ssb_gpio_init(struct ssb_bus *bus);
+extern int ssb_gpio_unregister(struct ssb_bus *bus);
+#else /* CONFIG_SSB_DRIVER_GPIO */
+static inline int ssb_gpio_init(struct ssb_bus *bus)
+{
+ return -ENOTSUPP;
+}
+static inline int ssb_gpio_unregister(struct ssb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_DRIVER_GPIO */
+
#endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -6,8 +6,10 @@
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
+#include <linux/gpio.h>
#include <linux/mod_devicetable.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <linux/ssb/ssb_regs.h>
@@ -16,19 +18,29 @@ struct pcmcia_device;
struct ssb_bus;
struct ssb_driver;
+struct ssb_sprom_core_pwr_info {
+ u8 itssi_2g, itssi_5g;
+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
+ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
+};
+
struct ssb_sprom {
u8 revision;
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
+ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
+ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
+ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
u8 et0phyaddr; /* MII address for enet0 */
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
+ u16 dev_id; /* Device ID overriding e.g. PCI ID */
u16 board_rev; /* Board revision number from SPROM. */
+ u16 board_num; /* Board number from SPROM. */
+ u16 board_type; /* Board type from SPROM. */
u8 country_code; /* Country Code */
- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
+ char alpha2[2]; /* Country Code as two chars like EU or US */
+ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
+ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
@@ -47,10 +59,10 @@ struct ssb_sprom {
u8 gpio1; /* GPIO pin 1 */
u8 gpio2; /* GPIO pin 2 */
u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
u8 tri2g; /* 2.4GHz TX isolation */
@@ -61,8 +73,8 @@ struct ssb_sprom {
u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
- u8 rxpo2g; /* 2GHz RX power offset */
- u8 rxpo5g; /* 5GHz RX power offset */
+ s8 rxpo2g; /* 2GHz RX power offset */
+ s8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
u8 rssismc2g;
u8 rssismf2g;
@@ -82,16 +94,13 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
+ struct ssb_sprom_core_pwr_info core_pwr_info[4];
+
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
struct {
- struct {
- s8 a0, a1, a2, a3;
- } ghz24; /* 2.4GHz band */
- struct {
- s8 a0, a1, a2, a3;
- } ghz5; /* 5GHz band */
+ s8 a0, a1, a2, a3;
} antenna_gain;
struct {
@@ -103,14 +112,85 @@ struct ssb_sprom {
} ghz5;
} fem;
- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ u16 mcs2gpo[8];
+ u16 mcs5gpo[8];
+ u16 mcs5glpo[8];
+ u16 mcs5ghpo[8];
+ u8 opo;
+
+ u8 rxgainerr2ga[3];
+ u8 rxgainerr5gla[3];
+ u8 rxgainerr5gma[3];
+ u8 rxgainerr5gha[3];
+ u8 rxgainerr5gua[3];
+
+ u8 noiselvl2ga[3];
+ u8 noiselvl5gla[3];
+ u8 noiselvl5gma[3];
+ u8 noiselvl5gha[3];
+ u8 noiselvl5gua[3];
+
+ u8 regrev;
+ u8 txchain;
+ u8 rxchain;
+ u8 antswitch;
+ u16 cddpo;
+ u16 stbcpo;
+ u16 bw40po;
+ u16 bwduppo;
+
+ u8 tempthresh;
+ u8 tempoffset;
+ u16 rawtempsense;
+ u8 measpower;
+ u8 tempsense_slope;
+ u8 tempcorrx;
+ u8 tempsense_option;
+ u8 freqoffset_corr;
+ u8 iqcal_swp_dis;
+ u8 hw_iqcal_en;
+ u8 elna2g;
+ u8 elna5g;
+ u8 phycal_tempdelta;
+ u8 temps_period;
+ u8 temps_hysteresis;
+ u8 measpower1;
+ u8 measpower2;
+ u8 pcieingress_war;
+
+ /* power per rate from sromrev 9 */
+ u16 cckbw202gpo;
+ u16 cckbw20ul2gpo;
+ u32 legofdmbw202gpo;
+ u32 legofdmbw20ul2gpo;
+ u32 legofdmbw205glpo;
+ u32 legofdmbw20ul5glpo;
+ u32 legofdmbw205gmpo;
+ u32 legofdmbw20ul5gmpo;
+ u32 legofdmbw205ghpo;
+ u32 legofdmbw20ul5ghpo;
+ u32 mcsbw202gpo;
+ u32 mcsbw20ul2gpo;
+ u32 mcsbw402gpo;
+ u32 mcsbw205glpo;
+ u32 mcsbw20ul5glpo;
+ u32 mcsbw405glpo;
+ u32 mcsbw205gmpo;
+ u32 mcsbw20ul5gmpo;
+ u32 mcsbw405gmpo;
+ u32 mcsbw205ghpo;
+ u32 mcsbw20ul5ghpo;
+ u32 mcsbw405ghpo;
+ u16 mcs32po;
+ u16 legofdm40duppo;
+ u8 sar2g;
+ u8 sar5g;
};
/* Information about the PCB the circuitry is soldered on. */
struct ssb_boardinfo {
u16 vendor;
u16 type;
- u8 rev;
};
@@ -166,6 +246,7 @@ struct ssb_bus_ops {
#define SSB_DEV_MINI_MACPHY 0x823
#define SSB_DEV_ARM_1176 0x824
#define SSB_DEV_ARM_7TDMI 0x825
+#define SSB_DEV_ARM_CM3 0x82A
/* Vendor-ID values */
#define SSB_VENDOR_BROADCOM 0x4243
@@ -260,13 +341,61 @@ enum ssb_bustype {
#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
/* board_type */
+#define SSB_BOARD_BCM94301CB 0x0406
+#define SSB_BOARD_BCM94301MP 0x0407
+#define SSB_BOARD_BU4309 0x040A
+#define SSB_BOARD_BCM94309CB 0x040B
+#define SSB_BOARD_BCM4309MP 0x040C
+#define SSB_BOARD_BU4306 0x0416
#define SSB_BOARD_BCM94306MP 0x0418
#define SSB_BOARD_BCM4309G 0x0421
#define SSB_BOARD_BCM4306CB 0x0417
-#define SSB_BOARD_BCM4309MP 0x040C
+#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
+#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
+#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
+#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
+#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
+#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
+#define SSB_BOARD_BU4318 0x0447
+#define SSB_BOARD_CB4318 0x0448
+#define SSB_BOARD_MPG4318 0x0449
#define SSB_BOARD_MP4318 0x044A
-#define SSB_BOARD_BU4306 0x0416
-#define SSB_BOARD_BU4309 0x040A
+#define SSB_BOARD_SD4318 0x044B
+#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
+#define SSB_BOARD_BCM94303MP 0x044E
+#define SSB_BOARD_BCM94306MPM 0x0450
+#define SSB_BOARD_BCM94306MPL 0x0453
+#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
+#define SSB_BOARD_BCM94306MPLNA 0x0457
+#define SSB_BOARD_BCM94306MPH 0x045B
+#define SSB_BOARD_BCM94306PCIV 0x045C
+#define SSB_BOARD_BCM94318MPGH 0x0463
+#define SSB_BOARD_BU4311 0x0464
+#define SSB_BOARD_BCM94311MC 0x0465
+#define SSB_BOARD_BCM94311MCAG 0x0466
+/* 4321 boards */
+#define SSB_BOARD_BU4321 0x046B
+#define SSB_BOARD_BU4321E 0x047C
+#define SSB_BOARD_MP4321 0x046C
+#define SSB_BOARD_CB2_4321 0x046D
+#define SSB_BOARD_CB2_4321_AG 0x0066
+#define SSB_BOARD_MC4321 0x046E
+/* 4325 boards */
+#define SSB_BOARD_BCM94325DEVBU 0x0490
+#define SSB_BOARD_BCM94325BGABU 0x0491
+#define SSB_BOARD_BCM94325SDGWB 0x0492
+#define SSB_BOARD_BCM94325SDGMDL 0x04AA
+#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
+#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
+#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
+/* 4322 boards */
+#define SSB_BOARD_BCM94322MC 0x04A4
+#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
+#define SSB_BOARD_BCM94322HM 0x04B0
+#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
+/* 4312 boards */
+#define SSB_BOARD_BU4312 0x048A
+#define SSB_BOARD_BCM4312MCGSG 0x04B5
/* chip_package */
#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
@@ -354,7 +483,11 @@ struct ssb_bus {
#ifdef CONFIG_SSB_EMBEDDED
/* Lock for GPIO register access. */
spinlock_t gpio_lock;
+ struct platform_device *watchdog;
#endif /* EMBEDDED */
+#ifdef CONFIG_SSB_DRIVER_GPIO
+ struct gpio_chip gpio;
+#endif /* DRIVER_GPIO */
/* Internal-only stuff follows. Do not touch. */
struct list_head list;
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -219,6 +219,7 @@
#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
+#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
@@ -504,7 +505,9 @@
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
-#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */
+#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */
+#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */
/* Status register bits for ST flashes */
#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
@@ -588,7 +591,10 @@ struct ssb_chipcommon {
u32 status;
/* Fast Powerup Delay constant */
u16 fast_pwrup_delay;
+ spinlock_t gpio_lock;
struct ssb_chipcommon_pmu pmu;
+ u32 ticks_per_ms;
+ u32 max_timer_ms;
};
static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
@@ -628,8 +634,7 @@ enum ssb_clkmode {
extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
enum ssb_clkmode mode);
-extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
- u32 ticks);
+extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks);
void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
@@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value);
+u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value);
#ifdef CONFIG_SSB_SERIAL
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
@@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
enum ssb_pmu_ldo_volt_id id, u32 voltage);
void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
+void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
#endif /* LINUX_SSB_CHIPCO_H_ */
--- a/include/linux/ssb/ssb_driver_extif.h
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -152,12 +152,16 @@
/* watchdog */
#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
+#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1)
+#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \
+ / (SSB_EXTIF_WATCHDOG_CLK / 1000))
#ifdef CONFIG_SSB_DRIVER_EXTIF
struct ssb_extif {
struct ssb_device *dev;
+ spinlock_t gpio_lock;
};
static inline bool ssb_extif_available(struct ssb_extif *extif)
@@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(s
extern void ssb_extif_timing_init(struct ssb_extif *extif,
unsigned long ns);
-extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
- u32 ticks);
+extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks);
/* Extif GPIO pin access */
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
@@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct s
}
static inline
-void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
- u32 ticks)
+void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
{
}
+static inline
+u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+#ifdef CONFIG_SSB_SERIAL
+static inline int ssb_extif_serial_init(struct ssb_extif *extif,
+ struct ssb_serial_port *ports)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_SERIAL */
+
#endif /* CONFIG_SSB_DRIVER_EXTIF */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -2,6 +2,7 @@
#define LINUX_SSB_DRIVER_GIGE_H_
#include <linux/ssb/ssb.h>
+#include <linux/bug.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
@@ -96,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
return 0;
}
-#ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-{
- char buf[20];
- if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
- return;
- nvram_parse_macaddr(buf, macaddr);
-}
-#else
-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
+ if (!dev)
+ return -ENODEV;
+
+ memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
+ return 0;
}
-#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
@@ -174,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
{
return 0;
}
+static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+ return -ENODEV;
+}
#endif /* CONFIG_SSB_DRIVER_GIGE */
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -13,6 +13,24 @@ struct ssb_serial_port {
unsigned int reg_shift;
};
+struct ssb_pflash {
+ bool present;
+ u8 buswidth;
+ u32 window;
+ u32 window_size;
+};
+
+#ifdef CONFIG_SSB_SFLASH
+struct ssb_sflash {
+ bool present;
+ u32 window;
+ u32 blocksize;
+ u16 numblocks;
+ u32 size;
+
+ void *priv;
+};
+#endif
struct ssb_mipscore {
struct ssb_device *dev;
@@ -20,9 +38,10 @@ struct ssb_mipscore {
int nr_serial_ports;
struct ssb_serial_port serial_ports[4];
- u8 flash_buswidth;
- u32 flash_window;
- u32 flash_window_size;
+ struct ssb_pflash pflash;
+#ifdef CONFIG_SSB_SFLASH
+ struct ssb_sflash sflash;
+#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
@@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
{
}
+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
+{
+ return 0;
+}
+
#endif /* CONFIG_SSB_DRIVER_MIPS */
#endif /* LINUX_SSB_MIPSCORE_H_ */
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -172,6 +172,7 @@
#define SSB_SPROMSIZE_WORDS_R4 220
#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+#define SSB_SPROMSIZE_WORDS_R10 230
#define SSB_SPROM_BASE1 0x1000
#define SSB_SPROM_BASE31 0x0800
#define SSB_SPROM_REVISION 0x007E
@@ -228,6 +229,7 @@
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
#define SSB_SPROM1_AGAIN_A_SHIFT 8
+#define SSB_SPROM1_CCODE 0x0076
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
@@ -267,6 +269,7 @@
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
/* SPROM Revision 4 */
+#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */
#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
@@ -287,11 +290,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
@@ -389,6 +392,11 @@
#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
#define SSB_SPROM8_GPIOB_P3_SHIFT 8
+#define SSB_SPROM8_LEDDC 0x009A
+#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */
+#define SSB_SPROM8_LEDDC_ON_SHIFT 8
+#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */
+#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
@@ -404,6 +412,13 @@
#define SSB_SPROM8_AGAIN2_SHIFT 0
#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
#define SSB_SPROM8_AGAIN3_SHIFT 8
+#define SSB_SPROM8_TXRXC 0x00A2
+#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
+#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
+#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
+#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
+#define SSB_SPROM8_TXRXC_SWITCH 0xff00
+#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
#define SSB_SPROM8_RSSISMF2G 0x000F
#define SSB_SPROM8_RSSISMC2G 0x00F0
@@ -430,6 +445,7 @@
#define SSB_SPROM8_TRI5GH_SHIFT 8
#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
+#define SSB_SPROM8_RXPO2G_SHIFT 0
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
#define SSB_SPROM8_FEM2G 0x00AE
@@ -445,10 +461,71 @@
#define SSB_SROM8_FEM_ANTSWLUT 0xF800
#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
#define SSB_SPROM8_THERMAL 0x00B2
-#define SSB_SPROM8_MPWR_RAWTS 0x00B4
-#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
-#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
-#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
+#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
+#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
+#define SSB_SPROM8_THERMAL_TRESH 0xff00
+#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
+/* Temp sense related entries */
+#define SSB_SPROM8_RAWTS 0x00B4
+#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
+#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
+#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
+#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
+#define SSB_SPROM8_OPT_CORRX 0x00B6
+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
+#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
+#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
+#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
+/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
+#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
+#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
+#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
+#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
+#define SSB_SPROM8_TEMPDELTA 0x00BC
+#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
+#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
+#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
+#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
+#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
+#define SSB_SROM8_PWR_INFO_CORE1 0x00E0
+#define SSB_SROM8_PWR_INFO_CORE2 0x0100
+#define SSB_SROM8_PWR_INFO_CORE3 0x0120
+
+#define SSB_SROM8_2G_MAXP_ITSSI 0x00
+#define SSB_SPROM8_2G_MAXP 0x00FF
+#define SSB_SPROM8_2G_ITSSI 0xFF00
+#define SSB_SPROM8_2G_ITSSI_SHIFT 8
+#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */
+#define SSB_SROM8_2G_PA_1 0x04
+#define SSB_SROM8_2G_PA_2 0x06
+#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */
+#define SSB_SPROM8_5G_MAXP 0x00FF
+#define SSB_SPROM8_5G_ITSSI 0xFF00
+#define SSB_SPROM8_5G_ITSSI_SHIFT 8
+#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */
+#define SSB_SPROM8_5GH_MAXP 0x00FF
+#define SSB_SPROM8_5GL_MAXP 0xFF00
+#define SSB_SPROM8_5GL_MAXP_SHIFT 8
+#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */
+#define SSB_SROM8_5G_PA_1 0x0E
+#define SSB_SROM8_5G_PA_2 0x10
+#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */
+#define SSB_SROM8_5GL_PA_1 0x14
+#define SSB_SROM8_5GL_PA_2 0x16
+#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */
+#define SSB_SROM8_5GH_PA_1 0x1A
+#define SSB_SROM8_5GH_PA_2 0x1C
+
+/* TODO: Make it deprecated */
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
@@ -473,12 +550,23 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
+
#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */
#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
+#define SSB_SPROM8_2G_MCSPO 0x0152
+#define SSB_SPROM8_5G_MCSPO 0x0162
+#define SSB_SPROM8_5GL_MCSPO 0x0172
+#define SSB_SPROM8_5GH_MCSPO 0x0182
+
+#define SSB_SPROM8_CDDPO 0x0192
+#define SSB_SPROM8_STBCPO 0x0194
+#define SSB_SPROM8_BW40PO 0x0196
+#define SSB_SPROM8_BWDUPPO 0x0198
+
/* Values for boardflags_lo read from SPROM */
#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
--- /dev/null
+++ b/include/linux/bcm47xx_wdt.h
@@ -0,0 +1,19 @@
+#ifndef LINUX_BCM47XX_WDT_H_
+#define LINUX_BCM47XX_WDT_H_
+
+#include <linux/types.h>
+
+
+struct bcm47xx_wdt {
+ u32 (*timer_set)(struct bcm47xx_wdt *, u32);
+ u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32);
+ u32 max_timer_ms;
+
+ void *driver_data;
+};
+
+static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
+{
+ return wdt->driver_data;
+}
+#endif /* LINUX_BCM47XX_WDT_H_ */
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -4259,7 +4259,8 @@ static void b43_nphy_pmu_spur_avoid(stru
#endif
#ifdef CONFIG_B43_SSB
case B43_BUS_SSB:
- /* FIXME */
+ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
+ avoid);
break;
#endif
}
Reference in New Issue View Git Blame Copy Permalink