1eceab3fc0
In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. While at it, remove unused m25p80 label. Tested on rt5350 (for spi-nor) and rt3662 (for cfi-flash). 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Sungbo Eo <mans0n@gorani.run>
145 lines
2.6 KiB
Plaintext
145 lines
2.6 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "rt3050.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
compatible = "belkin,f5d8235-v2", "ralink,rt3052-soc";
|
|
model = "Belkin F5D8235 v2";
|
|
|
|
aliases {
|
|
led-boot = &led_router;
|
|
led-failsafe = &led_router;
|
|
led-running = &led_router;
|
|
led-upgrade = &led_router;
|
|
};
|
|
|
|
flash@1f000000 {
|
|
compatible = "cfi-flash";
|
|
reg = <0x1f000000 0x800000>;
|
|
bank-width = <2>;
|
|
device-width = <2>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
uboot: partition@0 {
|
|
label = "uboot";
|
|
reg = <0x0 0x50000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0x790000>;
|
|
};
|
|
|
|
partition@7e0000 {
|
|
label = "nvram";
|
|
reg = <0x7e0000 0x10000>;
|
|
};
|
|
|
|
factory: partition@7f0000 {
|
|
label = "factory";
|
|
reg = <0x7f0000 0x10000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rtl8366rb {
|
|
compatible = "realtek,rtl8366rb";
|
|
gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
|
|
gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
internet {
|
|
label = "f5d8235-v2:blue:internet";
|
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
internet2 {
|
|
label = "f5d8235-v2:amber:internet";
|
|
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
modem {
|
|
label = "f5d8235-v2:blue:modem";
|
|
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
modem2 {
|
|
label = "f5d8235-v2:amber:modem";
|
|
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_router: router {
|
|
label = "f5d8235-v2:blue:router";
|
|
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
storage {
|
|
label = "f5d8235-v2:blue:storage";
|
|
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
|
trigger-sources = <&otg_port1>;
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
|
|
storage2 {
|
|
label = "f5d8235-v2:amber:storage";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
security {
|
|
label = "f5d8235-v2:blue:security";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
security2 {
|
|
label = "f5d8235-v2:amber:security";
|
|
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "spi", "i2c", "jtag", "mdio", "uartf";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
|
|
ðernet {
|
|
mtd-mac-address = <&uboot 0x40004>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_pins>;
|
|
};
|
|
|
|
&esw {
|
|
ralink,rgmii = <1>;
|
|
mediatek,portmap = <0x3f>;
|
|
ralink,fct2 = <0x0002500c>;
|
|
/*
|
|
* ext phy base addr 31, rx/tx clock skew 0,
|
|
* turbo mii off, rgmi 3.3v off, port 5 polling off
|
|
* port5: enabled, gige, full-duplex, rx/tx-flow-control
|
|
* port6: enabled, gige, full-duplex, rx/tx-flow-control
|
|
*/
|
|
ralink,fpa2 = <0x1f003fff>;
|
|
};
|
|
|
|
&wmac {
|
|
ralink,mtd-eeprom = <&uboot 0x40000>;
|
|
};
|
|
|
|
&otg {
|
|
status = "okay";
|
|
};
|