Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 9af52f3a2c kernel: kmod-ssb, kmod-b44: fix load order This fixes the following error: b44: Unknown symbol ssb_device_is_enabled (err 0) b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0) b44: Unknown symbol ssb_bus_may_powerdown (err 0) b44: Unknown symbol ssb_pcihost_register (err 0) b44: Unknown symbol ssb_device_disable (err 0) b44: Unknown symbol ssb_device_enable (err 0) b44: Unknown symbol ssb_driver_unregister (err 0) b44: Unknown symbol __ssb_driver_register (err 0) b44: Unknown symbol ssb_bus_powerup (err 0) b44: Unknown symbol ssb_clockspeed (err 0) b44: Unknown symbol ssb_dma_translation (err 0) Reported-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 37903		2013-09-05 19:56:04 +00:00
docs
include	Fix IPv6 NAT breaking older kernels	2013-09-03 06:29:46 +00:00
package	kernel: kmod-ssb, kmod-b44: fix load order	2013-09-05 19:56:04 +00:00
scripts	scripts/feeds: ensure that --ff is enabled	2013-09-02 18:25:10 +00:00
target	Add missing symbol	2013-09-05 10:08:59 +00:00
toolchain	build: decouple the mips16 support flag from the toolchain	2013-08-14 13:02:29 +00:00
tools	upx: upgrade to 3.09	2013-08-19 01:22:29 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	Config.in: improve wording for kernel/DT inclusion flags	2013-08-28 00:07:40 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE
Makefile
README
rules.mk	build: decouple the mips16 support flag from the toolchain	2013-08-14 13:02:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org