Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 9a2cf10c33 netfilter: Enable compiling iptables match cluster This patch adds the userspace and kernelspace for - match NETFILTER_XT_MATCH_CLUSTER This match can be used to deploy gateway and back-end load-sharing clusters. - target IP_NF_TARGET_CLUSTERIP This module allows you to configure a simple cluster of nodes that share a certain IP and MAC address without an explicit load balancer in front of them. Connections are statically distributed between the nodes in this cluster. This is used i.e. by strongswan-ha. Signed-off-by: Christian Scheele <cs@embedd.com> SVN-Revision: 43174		2014-11-03 22:01:45 +00:00
config	config: use PARTUUID by default on x86_64	2014-10-27 14:35:39 +00:00
docs
include	netfilter: Enable compiling iptables match cluster	2014-11-03 22:01:45 +00:00
package	netfilter: Enable compiling iptables match cluster	2014-11-03 22:01:45 +00:00
scripts	generate list of license information for packages	2014-10-26 16:57:33 +00:00
target	ar71xx: add support for Netgear WNR2000v4	2014-11-03 20:20:56 +00:00
toolchain	toolchain: fix mips64 musl linker names	2014-10-24 00:15:58 +00:00
tools	ramips: add support for A5-V11 board (resubmit)	2014-10-29 11:01:17 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds: switch LuCI to Github repo	2014-10-09 21:27:26 +00:00
LICENSE
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	rules.mk: reduce shexport to one line to allow it to be put in a target context	2014-10-22 08:57:20 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org