Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board This patch fixes LED definitions for the DRAGINO2 board. 1. It renames the Router/USB led to System, as it is now marked "SYS" on the board. 2. It gives control of the LAN and WAN leds and some other GPIOs to Linux. 3. It fixes the active_low property for the LAN and WAN leds. 4. It sets up WLAN, LAN and WAN leds in the UCI defaults. 5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 42897		2014-10-14 10:33:07 +00:00
config	Kconfig: Fix missing help text in DEVEL config menu	2014-09-13 20:27:52 +00:00
docs
include	image.mk: remove legacy target rules	2014-10-12 15:01:08 +00:00
package	fstools: update to latest git HEAD	2014-10-13 19:41:16 +00:00
scripts	scripts/feeds: handle missing/broken feeds better	2014-10-13 19:41:27 +00:00
target	ar71xx: Fix LED definitions for the DRAGINO2 board	2014-10-14 10:33:07 +00:00
toolchain	gcc: remove version 4.8.0	2014-10-05 18:40:43 +00:00
tools	tools/mtd-utils: fix a segfault in parsing the device table	2014-10-12 15:00:15 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds: switch LuCI to Github repo	2014-10-09 21:27:26 +00:00
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org