Openwrt build for Asrock G10 Router
Go to file
Felix Fietkau 98fb380d88 mt76: update to the latest version, fixes setting per-vif mac address
d02a05b mt7603: update firmware to version 20160107100755
4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
170f334 mt76x2: remove MAC address limitation for multi-vif setups
3563b8f mt76x2: clean up MAC/BSSID address initialization
9de77e1 mt76x2: drop wiphy->addresses
a6a6e25 mt76x2: init: disable APCLI by default
c64633e mt76x2: configure rx filter based on monitor mode setting
ac815fa mt76x2: init: fix rx filter default value during init
e504656 mt7603: configure other-unicast drop based on monitor mode setting

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-12-08 17:58:05 +01:00
.github github: include pull request template 2017-03-12 17:38:31 +01:00
config mpc85xx: Enable initramfs for p1020 subtarget 2017-10-14 01:19:35 +02:00
include kernel: bump 4.9 to 4.9.67 2017-12-07 01:41:09 +02:00
package mt76: update to the latest version, fixes setting per-vif mac address 2017-12-08 17:58:05 +01:00
scripts scripts/config: add qconf files to .gitignore 2017-11-02 15:58:45 +01:00
target ar71xx: C58/C59 fix LAN1 working incorrectly 2017-12-08 13:53:03 +01:00
toolchain toolchain/musl: update to version 1.1.18 2017-11-09 12:35:31 +01:00
tools tools/sstrip: Fix compile under standard linux. 2017-12-08 10:40:20 +01:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default Add video feed to feeds.conf.default 2017-01-25 16:04:39 +01:00
LICENSE
Makefile build: prepare config.seed before package compilation 2017-03-18 12:08:04 +01:00
README
rules.mk rukes.mk: this patch broken grub2 builds 2017-09-01 10:17:22 +02:00

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org