Openwrt/target/linux/gemini/patches-3.18/121-arm-gemini-register-ethernet.patch
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00

210 lines
5.5 KiB
Diff

--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -28,9 +28,27 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
+#include <mach/gmac.h>
#include "common.h"
+static struct mdio_gpio_platform_data ib4220b_mdio = {
+ .mdc = 22,
+ .mdio = 21,
+ .phy_mask = ~(1 << 1),
+};
+
+static struct platform_device ib4220b_phy_device = {
+ .name = "mdio-gpio",
+ .id = 0,
+ .dev = { .platform_data = &ib4220b_mdio, },
+};
+
+static struct gemini_gmac_platform_data ib4220b_gmac_data = {
+ .bus_id[0] = "gpio-0:01",
+ .interface[0] = PHY_INTERFACE_MODE_RGMII,
+};
+
static struct gpio_led ib4220b_leds[] = {
{
.name = "nas4220b:orange:hdd",
@@ -87,15 +105,47 @@ static struct platform_device ib4220b_ke
},
};
+static void __init ib4220b_gmac_init(void)
+{
+ unsigned int val;
+
+ val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_IO_DRIVING_CTRL));
+ val |= (0x3 << GMAC0_PADS_SHIFT) | (0x3 << GMAC1_PADS_SHIFT);
+ writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_IO_DRIVING_CTRL));
+
+ val = (0x0 << GMAC0_RXDV_SKEW_SHIFT) | (0xf << GMAC0_RXC_SKEW_SHIFT) |
+ (0x7 << GMAC0_TXEN_SKEW_SHIFT) | (0xb << GMAC0_TXC_SKEW_SHIFT) |
+ (0x0 << GMAC1_RXDV_SKEW_SHIFT) | (0xf << GMAC1_RXC_SKEW_SHIFT) |
+ (0x7 << GMAC1_TXEN_SKEW_SHIFT) | (0xa << GMAC1_TXC_SKEW_SHIFT);
+ writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_GMAC_CTRL_SKEW_CTRL));
+
+ writel(0x77777777, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_GMAC0_DATA_SKEW_CTRL));
+ writel(0x77777777, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_GMAC1_DATA_SKEW_CTRL));
+
+ val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_ARBITRATION1_CTRL)) & ~BURST_LENGTH_MASK;
+ val |= (0x20 << BURST_LENGTH_SHIFT) | GMAC0_HIGH_PRIO | GMAC1_HIGH_PRIO;
+ writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
+ GLOBAL_ARBITRATION1_CTRL));
+}
+
static void __init ib4220b_init(void)
{
gemini_gpio_init();
+ ib4220b_gmac_init();
platform_register_uart();
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
platform_register_rtc();
platform_register_watchdog();
+ platform_device_register(&ib4220b_phy_device);
+ platform_register_ethernet(&ib4220b_gmac_data);
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -22,9 +22,29 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/gmac.h>
#include "common.h"
+static struct mdio_gpio_platform_data wbd111_mdio = {
+ .mdc = 22,
+ .mdio = 21,
+ .phy_mask = ~(1 << 1),
+};
+
+static struct platform_device wbd111_phy_device = {
+ .name = "mdio-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &wbd111_mdio,
+ },
+};
+
+static struct gemini_gmac_platform_data gmac_data = {
+ .bus_id[0] = "gpio-0:01",
+ .interface[0] = PHY_INTERFACE_MODE_MII,
+};
+
static struct gpio_keys_button wbd111_keys[] = {
{
.code = KEY_SETUP,
@@ -123,6 +143,8 @@ static void __init wbd111_init(void)
platform_device_register(&wbd111_keys_device);
platform_register_rtc();
platform_register_watchdog();
+ platform_device_register(&wbd111_phy_device);
+ platform_register_ethernet(&gmac_data);
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -22,9 +22,31 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/gmac.h>
#include "common.h"
+static struct mdio_gpio_platform_data wbd222_mdio = {
+ .mdc = 22,
+ .mdio = 21,
+ .phy_mask = ~((1 << 1) | (1 << 3)),
+};
+
+static struct platform_device wbd222_phy_device = {
+ .name = "mdio-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &wbd222_mdio,
+ },
+};
+
+static struct gemini_gmac_platform_data gmac_data = {
+ .bus_id[0] = "gpio-0:01",
+ .interface[0] = PHY_INTERFACE_MODE_MII,
+ .bus_id[1] = "gpio-0:03",
+ .interface[1] = PHY_INTERFACE_MODE_MII,
+};
+
static struct gpio_keys_button wbd222_keys[] = {
{
.code = KEY_SETUP,
@@ -123,6 +145,8 @@ static void __init wbd222_init(void)
platform_device_register(&wbd222_keys_device);
platform_register_rtc();
platform_register_watchdog();
+ platform_device_register(&wbd222_phy_device);
+ platform_register_ethernet(&gmac_data);
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -15,13 +15,35 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/sizes.h>
+#include <linux/mdio-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/gmac.h>
+
#include "common.h"
+static struct mdio_gpio_platform_data rut1xx_mdio = {
+ .mdc = 22,
+ .mdio = 21,
+ .phy_mask = ~(1 << 1),
+};
+
+static struct platform_device rut1xx_phy_device = {
+ .name = "mdio-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &rut1xx_mdio,
+ },
+};
+
+static struct gemini_gmac_platform_data gmac_data = {
+ .bus_id[0] = "gpio-0:01",
+ .interface[0] = PHY_INTERFACE_MODE_MII,
+};
+
static struct gpio_keys_button rut1xx_keys[] = {
{
.code = KEY_SETUP,
@@ -81,6 +103,8 @@ static void __init rut1xx_init(void)
platform_device_register(&rut1xx_keys_device);
platform_register_rtc();
platform_register_watchdog();
+ platform_device_register(&rut1xx_phy_device);
+ platform_register_ethernet(&gmac_data);
}
MACHINE_START(RUT100, "Teltonika RUT100")