Openwrt/target/linux/ramips/dts/DCS-930.dts
Luka Perkov 494c6e7f6e ralink: update DCS-930 dts
* read MAC address from factory partition
* remove port defines since there is only one port (most likely C/P error)

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43231
2014-11-11 00:05:14 +00:00

111 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "DCS-930", "ralink,rt3050-soc";
model = "D-Link DCS-930";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
ralink,function = "gpio";
};
};
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x400000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "kernel";
reg = <0x50000 0x150000>;
};
partition@150000 {
label = "rootfs";
reg = <0x150000 0x2b0000>;
};
partition {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "d-link:red:alert";
gpios = <&gpio0 8 1>;
};
power {
label = "d-link:green:status";
gpios = <&gpio0 9 1>;
};
wps {
label = "d-link:blue:wps";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x101>;
};
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
ralink,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
otg@101c0000 {
status = "okay";
};
};